69 grille on a 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*low&slow* · 02-10-2014, 05:36 AM

Well guys I'm havin one hell of time finding a 67/8 grille and when I do find one, paypal cancels my transactions for some unknown reason me, the last guy I tried to buy from, and the bank can't figure out.

So my journey was to switch from a 69 c10 to a 67 c10 front clip. Sold my 69 fenders and hood. Now I have 2 nice 67 fenders, no hood (yet) and a 69 grille.

So my question is, is their anyone out there that has any pics of a 69 grille on 67 fenders and hood??

OARNGESI · 02-10-2014, 07:23 AM

It wont work but it should be easy to trade your 67 fenders for 69 ones.

**Ol Blue K20** · 02-10-2014, 09:00 AM

Quote:

Originally Posted by oarngesi

it wont work but it should be easy to trade your 67 fenders for 69 ones.

x2

**special-K** · 02-10-2014, 10:16 AM

I see 67/68 Chevy grilles on the parts board all the time. I'm sure anyone would accept a postal money order. I have yet to get a PayPal account and I buy parts all the time.

*low&slow* · 02-11-2014, 05:36 AM

Quote:

Originally Posted by Ol Blue K20

x2

Don't want to go back to a 69.

Quote:

Originally Posted by special-K

I see 67/68 Chevy grilles on the parts board all the time. I'm sure anyone would accept a postal money order. I have yet to get a PayPal account and I buy parts all the time.

You must have good eyes. I've only found one 67/8 grille and I've been looking since December.

**Elliot949** · 02-11-2014, 09:02 AM

Quote:

Originally Posted by low&slow

Don't want to go back to a 69.

You must have good eyes. I've only found one 67/8 grille and I've been looking since December.

There are 2 67/68 grilles on the parts board right now... Here is a NOS being sold by "Robert Paul Thomas":

http://67-72chevytrucks.com/vboard/s...d.php?t=615625

This one is by seller "homebuilt hotrods"

http://67-72chevytrucks.com/vboard/s...d.php?t=613111

**special-K** · 02-11-2014, 11:24 AM

Just lending a hand,that's all. My eyes are getting pretty bad,but I can't afford to go to the optometrist. Getting by with reading glasses,though.

I see Marilyn without my reading glasses (after drinking chocolate milk

)

19673ontree · 02-11-2014, 12:23 PM

Yep everybody is hunting for a 67 68 grille I would hold out and get a 67 68 grille you already have the fenders I see this same question on here all the time , you can find one and as said above use a money order if you have to they are some great guys on here that sell parts in the parts forum I find it hard to believe that someone don't have a 67 68 grille heck I see them guys in texas parting out trucks they claim are to rough to be repaired with cherry grilles those posts erk me cause most of them trucks only need minor work LOL

*low&slow* · 02-11-2014, 03:18 PM

Quote:

Originally Posted by Elliot949

There are 2 67/68 grilles on the parts board right now... Here is a NOS being sold by "Robert Paul Thomas":

http://67-72chevytrucks.com/vboard/s...d.php?t=615625

This one is by seller "homebuilt hotrods"

http://67-72chevytrucks.com/vboard/s...d.php?t=613111

Yeah the "homebuilt hotrods" guys is the guy I was talking with about paypal situation. He said others were in line to buy so I told him he could sell it. Didn't know it was still available.

**Elliot949** · 02-11-2014, 03:59 PM

Quote:

Originally Posted by low&slow

Yeah the "homebuilt hotrods" guys is the guy I was talking with about paypal situation. He said others were in line to buy so I told him he could sell it. Didn't know it was still available.

I am not real sire but cash3581 may have one... you might try and send him a PM...

C/10 King · 02-11-2014, 04:08 PM

Quote:

Originally Posted by special-K

Just lending a hand,that's all. My eyes are getting pretty bad,but I can't afford to go to the optometrist. Getting by with reading glasses,though.

I see Marilyn without my reading glasses (after drinking chocolate milk

)

Arrrrrrh, I saw Justin Cyrus!!!!!!!

Tim, what does that mean???
Sorry to change the subject.

**Ol Blue K20** · 02-11-2014, 04:12 PM

Quote:

Originally Posted by C/10 King

Arrrrrrh, I saw Justin Cyrus!!!!!!!

Tim, what does that mean???
Sorry to change the subject.

I think it means you're a you have great vision. They're twins anyway

**special-K** · 02-11-2014, 11:31 PM

Rene,not Miley Bieber? When I put my reading glasses on I still see Marylin...how she'd look today (after drinking chocolate milk)

Hey,sorry about the hijacking. I did see the one you're talking about. You should have just went with a postal money order. But,I'm sure I've seen others since December.
To use a 69 grille you'll need a core support,fenders,hood,and grille center support. I'd say patience is your best friend. Pony up the $25 for a membership so you can post a WTB. You'd be surprised one will likely pop out of the woodwork

19673ontree · 02-12-2014, 04:26 AM

Dont they make a reproduction 67 68 grille ?

19673ontree · 02-12-2014, 04:34 AM

Yep they make a new repro but they are $350 or so I just looked on ebay found two used ones $150ish ,,

*low&slow* · 02-14-2014, 03:31 AM

Quote:

Originally Posted by 19673ontree

Yep they make a new repro but they are $350 or so I just looked on ebay found two used ones $150ish ,,

What site did you find one on that cost $350?

19673ontree · 02-14-2014, 04:46 AM

Ebay

02-10-2014, 05:36 AM	#1
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	69 grille on a 67 Well guys I'm havin one hell of time finding a 67/8 grille and when I do find one, paypal cancels my transactions for some unknown reason me, the last guy I tried to buy from, and the bank can't figure out. So my journey was to switch from a 69 c10 to a 67 c10 front clip. Sold my 69 fenders and hood. Now I have 2 nice 67 fenders, no hood (yet) and a 69 grille. So my question is, is their anyone out there that has any pics of a 69 grille on 67 fenders and hood??

02-10-2014, 07:23 AM	#2
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: 69 grille on a 67 It wont work but it should be easy to trade your 67 fenders for 69 ones. __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

02-10-2014, 10:16 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 69 grille on a 67 I see 67/68 Chevy grilles on the parts board all the time. I'm sure anyone would accept a postal money order. I have yet to get a PayPal account and I buy parts all the time. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-11-2014, 11:24 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 69 grille on a 67 Just lending a hand,that's all. My eyes are getting pretty bad,but I can't afford to go to the optometrist. Getting by with reading glasses,though. I see Marilyn without my reading glasses (after drinking chocolate milk ) Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-11-2014, 12:23 PM	#8
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: 69 grille on a 67 Yep everybody is hunting for a 67 68 grille I would hold out and get a 67 68 grille you already have the fenders I see this same question on here all the time , you can find one and as said above use a money order if you have to they are some great guys on here that sell parts in the parts forum I find it hard to believe that someone don't have a 67 68 grille heck I see them guys in texas parting out trucks they claim are to rough to be repaired with cherry grilles those posts erk me cause most of them trucks only need minor work LOL __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

02-11-2014, 11:31 PM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 69 grille on a 67 Rene,not Miley Bieber? When I put my reading glasses on I still see Marylin...how she'd look today (after drinking chocolate milk) Hey,sorry about the hijacking. I did see the one you're talking about. You should have just went with a postal money order. But,I'm sure I've seen others since December. To use a 69 grille you'll need a core support,fenders,hood,and grille center support. I'd say patience is your best friend. Pony up the $25 for a membership so you can post a WTB. You'd be surprised one will likely pop out of the woodwork __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 02-12-2014 at 10:13 AM.

02-12-2014, 04:26 AM	#14
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: 69 grille on a 67 Dont they make a reproduction 67 68 grille ? __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

02-12-2014, 04:34 AM	#15
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: 69 grille on a 67 Yep they make a new repro but they are $350 or so I just looked on ebay found two used ones $150ish ,, __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

02-14-2014, 04:46 AM	#17
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: 69 grille on a 67 Ebay __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.