6 lug disc to 5 lug disc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hotroddiesel · 02-10-2014, 05:33 PM

I currently have a 1970 c10 cst400 with a 6 lug power disc brake conversion installed by the previous owner. I would like to go to 5 lug. Can I swap out the 6 lug disc for 5 lug disc. The disc brake conversion I currently have is cpp with dropped spindles. Any help on this is greatly appreciated. Thank you

67ChevyRedneck · 02-10-2014, 05:39 PM

I have ECE 6 lug rotors and they're a direct match to the 71/72 style spindles, just drilled with 6 lug pattern (I had 71/72 5 lug rotors on, then swapped to the $$$ 6 lug rotors so my wheel pattern matched). CPP stuff should be the same. You could contact CPP and ask them, I'm sure they've been asked that question before.

Tx Firefighter · 02-10-2014, 10:26 PM

Any local parts store should have the 1.25 inch thick 5 lug rotors off of a 71-87 c10 truck fitment. They are bolt on in place of your six lug rotors.

Hotroddiesel · 02-11-2014, 02:05 AM

Thank you for the replies. I have an email into CPP but havn't heard back from them. I enjoy reading and appreciate the feedback

Fleetline Fever · 02-17-2014, 09:58 PM

Hey Hotroddiesel If you change out your 6 lug rotors for 5 lug, and your 6 lugs are in good shape I would love to buy them. Let me know. send me a PM

02-10-2014, 05:33 PM	#1
Hotroddiesel Registered User Join Date: Jan 2014 Location: rohnert park california Posts: 2	6 lug disc to 5 lug disc I currently have a 1970 c10 cst400 with a 6 lug power disc brake conversion installed by the previous owner. I would like to go to 5 lug. Can I swap out the 6 lug disc for 5 lug disc. The disc brake conversion I currently have is cpp with dropped spindles. Any help on this is greatly appreciated. Thank you

02-10-2014, 05:39 PM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 6 lug disc to 5 lug disc I have ECE 6 lug rotors and they're a direct match to the 71/72 style spindles, just drilled with 6 lug pattern (I had 71/72 5 lug rotors on, then swapped to the $$$ 6 lug rotors so my wheel pattern matched). CPP stuff should be the same. You could contact CPP and ask them, I'm sure they've been asked that question before. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-10-2014, 10:26 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: 6 lug disc to 5 lug disc Any local parts store should have the 1.25 inch thick 5 lug rotors off of a 71-87 c10 truck fitment. They are bolt on in place of your six lug rotors. __________________ I'm on the Instagram- @Gearhead_Kevin

02-11-2014, 02:05 AM	#4
Hotroddiesel Registered User Join Date: Jan 2014 Location: rohnert park california Posts: 2	Re: 6 lug disc to 5 lug disc Thank you for the replies. I have an email into CPP but havn't heard back from them. I enjoy reading and appreciate the feedback

02-17-2014, 09:58 PM	#5
Fleetline Fever Registered User Join Date: Feb 2014 Location: Indianapolis, IN Posts: 20	Re: 6 lug disc to 5 lug disc Hey Hotroddiesel If you change out your 6 lug rotors for 5 lug, and your 6 lugs are in good shape I would love to buy them. Let me know. send me a PM



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.