|
02-23-2014, 07:38 PM
|
#1 |
|
Registered User
Join Date: Dec 2013
Location: Portland, Ore.
Posts: 348
|
alignment numbers
hey folks
I have a 66 LWB that is lowered a bit 2" drop spindles front/ 4" jeep springs rear I just put some 255/60s on FJ cruiser wheels and it wallows around in the tire ruts on the freeway  The previous tires were much shorter…like a 26" tire, lolwhat kinda numbers should I give to my alignment guy? |
|
|
|
02-23-2014, 07:54 PM
|
#2 |
|
Registered User
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
|
Re: alignment numbers
1/16 per side for toe. As much caster as possible (probably wont go past 3 degrees) and up to 1 degree negative camber.
__________________
Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever! |
|
|
|
|
02-23-2014, 09:04 PM
|
#3 |
|
Registered User
Join Date: Dec 2013
Location: Portland, Ore.
Posts: 348
|
Re: alignment numbers
rad, thanks for the response.
currently on page 2 of your alignment thread, great stuff thanks a ton for putting that info up there for us. |
|
|
|
|
02-23-2014, 09:56 PM
|
#4 |
|
Registered User
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
|
Re: alignment numbers
Google "I found the magic button". It will be on the first page. If your Aligner has a modern machine he should be able to perform this function. Now that I have found it I consider it to be the O.N.L.Y. way to align a C10 or any shimmed vehicle. I preach and preach to remove ALL shims before an alignment. Its the only way to get a decent (and safe) alignment. Rock On Brother!
__________________
Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever! |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
