Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-24-2014, 11:38 AM | #1 |
Registered User
Join Date: Oct 2013
Location: Vancouver,Wa
Posts: 339
|
Froze up bolt on i-250
In the process of power steering conversion, was getting ready to attach the p/s bracket. The two bolts that are in the front, I can't seem to budge them. The bottom one felt like it was going to snap off. So now I'm applying Kano Kroil penitrating oil to the bolts. Is their a better product out there, that I should be using? I also have CRC Freeze off.
What are some options to take this bolt out? Heat it up? I've nevere done this, how do i heat it up with a butane torch? And whats the process for this? Thank you all for your help.
__________________
1968 C10, 250, L6 4spd OTF, Fleetside Upgrades: Power Steering .......................____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ |
02-24-2014, 01:48 PM | #2 |
Registered User
Join Date: Jan 2007
Location: Topeka,KS
Posts: 778
|
Re: Froze up bolt on i-250
Heat. Butane probably won't do it. Propane might. You really need a oxy/acetalyne torch. On bolts it's best if you can heat where it screws in to. You can heat to a bright (orange!) (steel) without ruining your heat treating. If you can't get to the threads and don't have a torch just heat the bolt up as much as you can and twist away.
You can try heat, and penetrating oil, and rapping the bolt head with a hammer. Spray the penetrating oil on it while it's hot. It may catch fire but it won't be extreme, you can blow it out with your breath. Good looking engine!
__________________
68' C20. 283CI w/55CC 305HO heads, NP435 Close Ratio, Corp. 14 bolt FF 3.21, 75' front end swap (everything but the X-member). Last edited by airdale94; 02-24-2014 at 02:01 PM. Reason: add |
02-27-2014, 04:38 PM | #3 |
Registered User
Join Date: Oct 2013
Location: Vancouver,Wa
Posts: 339
|
Re: Froze up bolt on i-250
Gr8 news for me I got the bolts out w/o any major issues. I sprayed them every day with Kroil penetrating oil and it seemed to work well. They were hard to get started, but after working aback and forth I finally free them loose. Thanks
__________________
1968 C10, 250, L6 4spd OTF, Fleetside Upgrades: Power Steering .......................____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ |
02-27-2014, 06:09 PM | #4 |
Registered User
Join Date: Mar 2012
Location: Boulder, CO
Posts: 350
|
Re: Froze up bolt on i-250
My experience is that, if Kroil won't get the fastener undone- it's time for the Flame Wrench! Got a pair of studs and nuts soaking on a '35 Plymouth shock absorber. I really don't want to hit it with fire- and, I probably won't have to.
__________________
If 'that which does not kill me, makes me stronger', then I should be Superman by now! |
02-27-2014, 07:04 PM | #5 |
Registered User
Join Date: Oct 2013
Location: Vancouver,Wa
Posts: 339
|
Re: Froze up bolt on i-250
I also read that a good home remedy was 50/50 ATF/Acetone I didn't get a chance to try it out but very interested. I will mix up a batch for upcoming issues.
__________________
1968 C10, 250, L6 4spd OTF, Fleetside Upgrades: Power Steering .......................____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ |
02-27-2014, 08:01 PM | #6 |
Senior Member
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: Froze up bolt on i-250
Amazon.com: OIL OF WINTERGREEN PT: Sports &...
i have been using this as a rust buster penetrating oil for 20 years in the navy, but dont get it on your face /eyes and groin Methyl Salicylate
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks |
02-27-2014, 08:24 PM | #7 | |
Registered User
Join Date: Oct 2013
Location: Vancouver,Wa
Posts: 339
|
Re: Froze up bolt on i-250
Quote:
__________________
1968 C10, 250, L6 4spd OTF, Fleetside Upgrades: Power Steering .......................____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ |
|
02-27-2014, 09:37 PM | #8 |
Senior Member
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: Froze up bolt on i-250
it is a liniment that physical therapist use as well, same active ingredent stuff in ben gay ect ect, but i buy the stuff from a chemical site so it is just advertised as Methyl Salicylate
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks |
Bookmarks |
|
|