CA WTB: '67 pass side door handle relay

[67carry-all]

I have a door handle relay from a yard pull and a new one from an aftermarket supplier. My '67 door handle doesn't fit on either because the serrated "nub" (not the whole shaft) that the handle goes on to is about 1/4" too long and the retainer clip opening doesn't line up with the notch on the relay. Anybody have a pass side door relay for '67-only in good-great shape they'd like to part with? Thanks.

[ScottG]

Originally Posted by 67carry-all

I have a door handle relay from a yard pull and a new one from an aftermarket supplier. My '67 door handle doesn't fit on either because the serrated "nub" (not the whole shaft) that the handle goes on to is about 1/4" too long and the retainer clip opening doesn't line up with the notch on the relay. Anybody have a pass side door relay for '67-only in good-great shape they'd like to part with? Thanks.

Where are you on located at? Im in Ventura, and I'm pretty sure I have what you need.

[michael bustamante]

Im junking a 67 pass door also if his doesnt work out

[67carry-all]

Thanks for the quick replies from both of you. Scott, I'm near Santa Cruz, so mailing would be best. What's your shipped price to 95001? Thanks.

[ScottG]

Originally Posted by 67carry-all

Thanks for the quick replies from both of you. Scott, I'm near Santa Cruz, so mailing would be best. What's your shipped price to 95001? Thanks.

I'm at work right now. Off at 5, let me dig it out first, make sure its solid, and I'll shoot you a price shipped.

[Classic Bowties]

Just sharing some pictures to go with your above request so that everyone is on the same page here, the last picture is showing the 67 door release handle fully engaged/clipped onto the splined shaft of the relay. In the event that ScottG or michael bustamante are unable to help you source this one year item, you can drop me a message and I will give you a couple options. Mel

[67carry-all]

Thanks, Mel, the pics and info are great and spot-on. I hadn't read or realized that this item was one-year only until I went to replace the prior worn relay.

[ScottG]

I finally got out to the garage to dig them out. Sorry about the delay. Unfortunately, mine are trashed. Sorry I couldn't help you out.

[67carry-all]

Scott - thanks for checking and posting back; I appreciate the time. Michael, is the relay from the '67 pass door in good shape and available? Thanks.

[67carry-all]

ttt - still looking for a '67-only pass. side door relay in good shape - anyone have one they'd like to part with? Thanks!

[cheyenne shortstep]

I just gutted a pair of '67 doors, let me check if the pass. side relay is good.
In all my years dealing with these I never knew these were '67 only, learn something new everyday.

[67carry-all]

Yeah, was news to me, too - found out the hard way!

[nickv6266]

I should have one as well if the others don't have one. Let me know . thanks

[cheyenne shortstep]

Here it is, tight with almost no wear, spring is not broken. $20 shipped.

[67carry-all]

Sounds and looks great - I'll take it. PM sent.

[67carry-all]

Cheyenne - received and installed the relay yesterday - it's in xlnt shape and working great - many thanks! Nick, thanks for the back-up offer - much appreciated.