AZ Bed parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

desertnick69 · 03-04-2014, 06:36 PM

I have the whole bed in pieces, and FOR SALE (now i am pretty green at this shipping game so i may be a bit slow with your respones, so if you would be pataint and if any one has any pointers on how to make this easyer please let me know! thanks)

floor $150.00 + shipping
front panel $50.00 + shipping
tailgate w/hardware $100.00 + shipping
the tire wells $35.00 each + shipping

Undone · 03-04-2014, 06:44 PM

Tailgate pictures?

nobolt · 03-04-2014, 07:05 PM

I could use the front 7" of bed floor. side to side. (if you decide to cut the floor for patch panels)
keep me in mind please.
thanks

chevyguy_72 · 03-04-2014, 09:07 PM

interested in more pics/details on wheel wells and shipping price to 32226?
Thanks

**Homebuilt Hotrods** · 03-04-2014, 09:08 PM

Very interested in tailgate pending pics. Please put me in line.

mikeoj · 03-04-2014, 09:17 PM

Interested in the front panel and /or wheel wells if still available pending shipping cost to 53012.Thanks,Mike

desertnick69 · 03-07-2014, 11:58 PM

Sorry I have not got back with anyone but here are some more pics of the tailgait, and the wheel wells. I should have life back to "normal" by Monday, (could someone give me a definition of "normal")

desertnick69 · 03-08-2014, 12:03 AM

here are the wheel wells

chevyguy_72 · 03-08-2014, 11:00 PM

Quote:

Originally Posted by desertnick69

here are the wheel wells

Looks pretty good... you have a chance to get the shipping quote to 32226

desertnick69 · 03-09-2014, 03:20 AM

Quote:

Originally Posted by nobolt

I could use the front 7" of bed floor. side to side. (if you decide to cut the floor for patch panels)
keep me in mind please.
thanks

Not interested in cutting it up at this time!

desertnick69 · 03-09-2014, 03:28 AM

Quote:

Originally Posted by chevyguy_72

Looks pretty good... you have a chance to get the shipping quote to 32226

I can have a quote Monday, also i found the splash guards, they are a bit bented i will thro them in if you want them. (If not interested let me know maybe some one else can use them)

desertnick69 · 03-09-2014, 07:03 PM

Quote:

Originally Posted by mikeoj

Interested in the front panel and /or wheel wells if still available pending shipping cost to 53012.Thanks,Mike

mikeoj wheel wells are pending, can get you ouote on front panel Monday.

Undone and Homebuilt Hotrods I did not realizz that the tailgate was that bad so I am droping it to $60.00 + shipping. Let me know.

Thanks

mikeoj · 03-09-2014, 07:31 PM

Thanks,Mike

chevyguy_72 · 03-10-2014, 09:02 AM

also could you post some pics of the wells inside where they bolt to the bedside?
Thanks

billsbowtie · 03-10-2014, 09:28 AM

desertnick69 grayhound is the best way i have found to ship large parts. but the bed floor would be to big for them.

88Ironduke · 03-10-2014, 01:19 PM

If that bed floor could be shipped I'd be in line to buy it in one piece. My bed floor is shot and that is perfect! If an option presents itself to ship I'd buy it!

88Ironduke

desertnick69 · 03-10-2014, 11:02 PM

Quote:

Originally Posted by billsbowtie

desertnick69 grayhound is the best way i have found to ship large parts. but the bed floor would be to big for them.

Thanks for the tip!

desertnick69 · 03-11-2014, 12:29 AM

Quote:

Originally Posted by chevyguy_72

also could you post some pics of the wells inside where they bolt to the bedside?
Thanks

The first ones are the Drivers side, others are the Passangers. The driver side has some scaring around the holes (my helper got a little carried away while i had a doc appt) nothing real serious. The Pass side is clean.

chevyguy_72 · 03-11-2014, 08:46 AM

Quote:

Originally Posted by desertnick69

The first ones are the Drivers side, others are the Passangers. The driver side has some scaring around the holes (my helper got a little carried away while i had a doc appt) nothing real serious. The Pass side is clean.

Thanks for those... Sorry if I wasn't clear... I am looking for the underneath where the tire would be and the edge that meets with the bedside.
Any luck on the shipping quote?
Thanks

88Ironduke · 03-11-2014, 06:06 PM

If you cut the bed I'm interested in life from the tail end of the floor.

88

desertnick69 · 03-11-2014, 07:18 PM

Quote:

Originally Posted by 88Ironduke

If you cut the bed I'm interested in life from the tail end of the floor.

88

You looking for the back half

88Ironduke · 03-11-2014, 09:45 PM

My bed floor is rotted in certain sections and the back half is the worst.... I'll get a measurement tomorrow and maybe we can work a deal.

Thanks
88

hounddogs! · 03-12-2014, 04:47 PM

Quote:

Originally Posted by desertnick69

mikeoj wheel wells are pending, can get you ouote on front panel Monday.

Undone and Homebuilt Hotrods I did not realizz that the tailgate was that bad so I am droping it to $60.00 + shipping. Let me know.

Thanks

Second in line for the front panel. I'd like to see how straight the top edge is. Thanks.
Loren

desertnick69 · 03-12-2014, 07:59 PM

Quote:

Originally Posted by chevyguy_72

Thanks for those... Sorry if I wasn't clear... I am looking for the underneath where the tire would be and the edge that meets with the bedside.
Any luck on the shipping quote?
Thanks

Here is the side you where looking for.

Leroy-B1 · 03-12-2014, 09:10 PM

I'm interested in the wheel wells if the drop this far

03-04-2014, 06:36 PM	#1
desertnick69 Registered User Join Date: Jan 2012 Location: Phoenix, Arizona Posts: 499	Bed parts I have the whole bed in pieces, and FOR SALE (now i am pretty green at this shipping game so i may be a bit slow with your respones, so if you would be pataint and if any one has any pointers on how to make this easyer please let me know! thanks) floor $150.00 + shipping front panel $50.00 + shipping tailgate w/hardware $100.00 + shipping the tire wells $35.00 each + shipping Attached Images

03-04-2014, 06:44 PM	#2
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 894	Re: Bed parts Tailgate pictures?

03-04-2014, 07:05 PM	#3
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Bed parts I could use the front 7" of bed floor. side to side. (if you decide to cut the floor for patch panels) keep me in mind please. thanks __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

03-04-2014, 09:07 PM	#4
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: Bed parts interested in more pics/details on wheel wells and shipping price to 32226? Thanks

03-04-2014, 09:08 PM	#5
Homebuilt Hotrods Senior Member Join Date: May 2012 Location: Black Hills, SD Posts: 347	Re: Bed parts Very interested in tailgate pending pics. Please put me in line. __________________ Garage Built

03-04-2014, 09:17 PM	#6
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Re: Bed parts Interested in the front panel and /or wheel wells if still available pending shipping cost to 53012.Thanks,Mike __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc. Last edited by mikeoj; 03-05-2014 at 09:52 PM. Reason: Add zip code

03-07-2014, 11:58 PM	#7
desertnick69 Registered User Join Date: Jan 2012 Location: Phoenix, Arizona Posts: 499	Re: Bed parts Sorry I have not got back with anyone but here are some more pics of the tailgait, and the wheel wells. I should have life back to "normal" by Monday, (could someone give me a definition of "normal") Attached Images

03-08-2014, 12:03 AM	#8
desertnick69 Registered User Join Date: Jan 2012 Location: Phoenix, Arizona Posts: 499	Re: Bed parts here are the wheel wells Attached Images

03-09-2014, 07:31 PM	#13
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Re: Bed parts Thanks,Mike __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

03-10-2014, 09:02 AM	#14
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: Bed parts also could you post some pics of the wells inside where they bolt to the bedside? Thanks

03-10-2014, 09:28 AM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Bed parts desertnick69 grayhound is the best way i have found to ship large parts. but the bed floor would be to big for them. __________________ i have 67/72 chevy truck parts f/s.

03-10-2014, 01:19 PM	#16
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: Bed parts If that bed floor could be shipped I'd be in line to buy it in one piece. My bed floor is shot and that is perfect! If an option presents itself to ship I'd buy it! 88Ironduke __________________ Retired USAF - No rockets, no mortars, no bad guys shooting...No stress!!! My Build Thread: Project 72' Green http://67-72chevytrucks.com/vboard/s...d.php?t=587932

03-11-2014, 06:06 PM	#20
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: Bed parts If you cut the bed I'm interested in life from the tail end of the floor. 88 __________________ Retired USAF - No rockets, no mortars, no bad guys shooting...No stress!!! My Build Thread: Project 72' Green http://67-72chevytrucks.com/vboard/s...d.php?t=587932

03-11-2014, 09:45 PM	#22
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: Bed parts My bed floor is rotted in certain sections and the back half is the worst.... I'll get a measurement tomorrow and maybe we can work a deal. Thanks 88 __________________ Retired USAF - No rockets, no mortars, no bad guys shooting...No stress!!! My Build Thread: Project 72' Green http://67-72chevytrucks.com/vboard/s...d.php?t=587932

03-12-2014, 09:10 PM	#25
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Bed parts I'm interested in the wheel wells if the drop this far



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.