2005 SSR 5.3 All Alum - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1971 GMC SHORTY** · 03-07-2014, 12:39 AM

Stand alone Wireing Harness Ready to Drop in... Not enough Torq For What I Need 2000.00 OBO Thanks Oh Yes Plus The Ride

**1971 GMC SHORTY** · 03-07-2014, 12:42 AM

Quote:

Originally Posted by 1971 GMC SHORTY

Stand alone Wireing Harness Ready to Drop in... Not enough Torq For What I Need 2000.00 OBO Thanks Oh Yes Plus The Ride

Another Picture

bigbluthng · 03-08-2014, 09:33 PM

engine only no trans? what else besides a fuel system and engine mounts would be needed?

**1971 GMC SHORTY** · 03-08-2014, 09:54 PM

Quote:

Originally Posted by bigbluthng

engine only no trans? what else besides a fuel system and engine mounts would be needed?

No Trans it Had Turbo 400,
You Need Just a Pump and Fuel Lines
It Is set Up For Chevy Hard Mounts and I Think I Have a Pump and Presser Reguler

68redc10 · 03-11-2014, 06:53 AM

How many miles are on this??

**1971 GMC SHORTY** · 03-11-2014, 11:14 AM

Quote:

Originally Posted by 68redc10

How many miles are on this??

Rebuilt. Then was Broken In and Car was Totaled

faribran · 06-03-2014, 06:59 PM

I would be interested in the alt/power steering bracket if you would separate. Thank you

70blackfish · 07-08-2014, 11:06 AM

Still have this?

**1971 GMC SHORTY** · 07-08-2014, 12:54 PM

Yes I do have inline fuel pump Now

**Blazerowner** · 07-24-2014, 10:20 PM

Pm sent

Hardesty454 · 07-29-2014, 11:37 PM

Still available? Quick question on year though. I though in 05 they swapped the 5.3 to a 6.0? Might be wrong. Interested either way.

**1971 GMC SHORTY** · 07-30-2014, 02:10 AM

Quote:

Originally Posted by Hardesty454

Still available? Quick question on year though. I though in 05 they swapped the 5.3 to a 6.0? Might be wrong. Interested either way.

Still Here it's 2004, looked at notes I Have on it don't no What happened With that. I have fuel Pump Single Fuel line Return from Filter

Hardesty454 · 07-30-2014, 09:37 AM

You said it was rebuilt and broken in, who rebuilt it? How many miles were on the break in. Anything done to it or stock rebuild. Aluminum block or just the heads.

**1971 GMC SHORTY** · 07-30-2014, 10:01 AM

SSP and harnesses harness rebuilt the motor complete kit put it in the car was broken and Dyno before you put in the car motor had Less then a thousand miles out of the car before it was crashed
It's a complete aluminum motor block and heads

Twisted78SS · 07-30-2014, 10:15 AM

Interested pending cost to ship.
Could you get a shipping quote to a business address in 98686

**1971 GMC SHORTY** · 07-30-2014, 10:49 AM

Quote:

Originally Posted by Twisted78SS

Interested pending cost to ship.
Could you get a shipping quote to a business address in 98686

Do u have A Place to Ship to with a Forklift

**1971 GMC SHORTY** · 07-30-2014, 10:54 AM

Set up with Chevy mounts ready to Bolt in

**1971 GMC SHORTY** · 07-30-2014, 10:57 AM

Quote:

Originally Posted by 1971 GMC SHORTY

Set up with Chevy mounts ready to Bolt in

Never Been Over Heated

**1971 GMC SHORTY** · 07-30-2014, 02:19 PM

Quote:

Originally Posted by Twisted78SS

Interested pending cost to ship.
Could you get a shipping quote to a business address in 98686

PM Sent

Twisted78SS · 07-30-2014, 06:49 PM

Yes, forklift is available for offloading.

**1971 GMC SHORTY** · 08-01-2014, 12:44 PM

Quote:

Originally Posted by Twisted78SS

Yes, forklift is available for offloading.

PM Sent

**1971 GMC SHORTY** · 08-07-2014, 11:13 AM

Will Trade For A Complete 348 Engine

nibs · 08-08-2014, 08:58 AM

Would you part with any of the accessories??? Crank pulley and tensioner?

**1971 GMC SHORTY** · 08-08-2014, 01:45 PM

Quote:

Originally Posted by nibs

Would you part with any of the accessories??? Crank pulley and tensioner?

Why Would I do That? Lol

laid67c10 · 08-25-2014, 10:58 PM

What's the price shipped to a fed ex loading dock in Longview, Tx?

03-07-2014, 12:39 AM	#1
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	2005 SSR 5.3 All Alum Stand alone Wireing Harness Ready to Drop in... Not enough Torq For What I Need 2000.00 OBO Thanks Oh Yes Plus The Ride Attached Images __________________ 1966 GMC K25 V6 351E Original Utility Truck 2000 C3500 Hot Rod Utility Truck 2003 ROAD KING 100th 124ci 6 Speed 145CI M/P Pro Street FXR 2002 FXDP 2007 2500HD DURAMAX. DD Studio Teamsters / Mechanic Retired GM Master Tech 20 Years Retired Ford Tech 15 Years

03-08-2014, 09:33 PM	#3
bigbluthng Registered User Join Date: Aug 2003 Location: canyon country, ca, USA Posts: 336	Re: 2005 SSR 5.3 All Alum engine only no trans? what else besides a fuel system and engine mounts would be needed? __________________

03-11-2014, 06:53 AM	#5
68redc10 Registered User Join Date: Jul 2011 Location: Oceanside, Ca Posts: 6	Re: 2005 SSR 5.3 All Alum How many miles are on this??

06-03-2014, 06:59 PM	#7
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 2005 SSR 5.3 All Alum I would be interested in the alt/power steering bracket if you would separate. Thank you __________________ "

07-08-2014, 11:06 AM	#8
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: 2005 SSR 5.3 All Alum Still have this? __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

07-08-2014, 12:54 PM	#9
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: 2005 SSR 5.3 All Alum Yes I do have inline fuel pump Now __________________ 1966 GMC K25 V6 351E Original Utility Truck 2000 C3500 Hot Rod Utility Truck 2003 ROAD KING 100th 124ci 6 Speed 145CI M/P Pro Street FXR 2002 FXDP 2007 2500HD DURAMAX. DD Studio Teamsters / Mechanic Retired GM Master Tech 20 Years Retired Ford Tech 15 Years

07-24-2014, 10:20 PM	#10
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,953	Re: 2005 SSR 5.3 All Alum Pm sent __________________ Kirk 72 Blazer CST 4wd highlander

07-29-2014, 11:37 PM	#11
Hardesty454 Registered User Join Date: Feb 2011 Location: Riverbank, Ca Posts: 1,006	Re: 2005 SSR 5.3 All Alum Still available? Quick question on year though. I though in 05 they swapped the 5.3 to a 6.0? Might be wrong. Interested either way. __________________ Rob 1971 c10 - ground up in progress Tripp's Speed Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=589750

07-30-2014, 09:37 AM	#13
Hardesty454 Registered User Join Date: Feb 2011 Location: Riverbank, Ca Posts: 1,006	Re: 2005 SSR 5.3 All Alum You said it was rebuilt and broken in, who rebuilt it? How many miles were on the break in. Anything done to it or stock rebuild. Aluminum block or just the heads. __________________ Rob 1971 c10 - ground up in progress Tripp's Speed Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=589750

07-30-2014, 10:01 AM	#14
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: 2005 SSR 5.3 All Alum SSP and harnesses harness rebuilt the motor complete kit put it in the car was broken and Dyno before you put in the car motor had Less then a thousand miles out of the car before it was crashed It's a complete aluminum motor block and heads Attached Images __________________ 1966 GMC K25 V6 351E Original Utility Truck 2000 C3500 Hot Rod Utility Truck 2003 ROAD KING 100th 124ci 6 Speed 145CI M/P Pro Street FXR 2002 FXDP 2007 2500HD DURAMAX. DD Studio Teamsters / Mechanic Retired GM Master Tech 20 Years Retired Ford Tech 15 Years

07-30-2014, 10:15 AM	#15
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: 2005 SSR 5.3 All Alum Interested pending cost to ship. Could you get a shipping quote to a business address in 98686 __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

07-30-2014, 10:54 AM	#17
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: 2005 SSR 5.3 All Alum Set up with Chevy mounts ready to Bolt in Attached Images __________________ 1966 GMC K25 V6 351E Original Utility Truck 2000 C3500 Hot Rod Utility Truck 2003 ROAD KING 100th 124ci 6 Speed 145CI M/P Pro Street FXR 2002 FXDP 2007 2500HD DURAMAX. DD Studio Teamsters / Mechanic Retired GM Master Tech 20 Years Retired Ford Tech 15 Years

07-30-2014, 06:49 PM	#20
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: 2005 SSR 5.3 All Alum Yes, forklift is available for offloading. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

08-07-2014, 11:13 AM	#22
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: 2005 SSR 5.3 All Alum Will Trade For A Complete 348 Engine __________________ 1966 GMC K25 V6 351E Original Utility Truck 2000 C3500 Hot Rod Utility Truck 2003 ROAD KING 100th 124ci 6 Speed 145CI M/P Pro Street FXR 2002 FXDP 2007 2500HD DURAMAX. DD Studio Teamsters / Mechanic Retired GM Master Tech 20 Years Retired Ford Tech 15 Years

08-08-2014, 08:58 AM	#23
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: 2005 SSR 5.3 All Alum Would you part with any of the accessories??? Crank pulley and tensioner? __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...



Register or Log In To remove these advertisements.

08-25-2014, 10:58 PM	#25
laid67c10 Registered User Join Date: Apr 2005 Location: longview, TX Posts: 280	Re: 2005 SSR 5.3 All Alum What's the price shipped to a fed ex loading dock in Longview, Tx? __________________ 49 Chevy - currently under construction being bagged and hunting for a LS drivetrain!!! 09 - Harley nighttrain on air ride!

Register or Log In To remove these advertisements.