WA Parting Out 1972 C10 Custom Deluxe

[thefraze_1020]

Hi guys, I'm parting out a 1972 Chevy 1/2 ton. I'll upload some pictures soon.

The smaller parts I can ship nationwide in a USPS Flat Rate box, bigger stuff probably close by only (NW WA), unless you want to pay an arm and a leg for shipping.

So, I've got a pretty rusty stripped cab. If you want metal pieces cut out of it, let me know before it gets scrapped.
Really nice uncut A/C dash panel. A little surface rust on the inside and top, and needs a bit of straightening where I cut the spot welds. $100
Good TH350 auto tranny. Has about 155,000 miles, shifted fine when the truck was running 5 years ago. $250
Decent gas tank (at least looks good from the outside). $75
Good glass except windshield. Back window (not slider)- $75, Full set door glass and vent windows $100
Gauge cluster, no tach, no vacuum, but has oil pressure, temp, and alternator. Everything on the cluster worked before I gutted the truck. $30

*No front end parts. The front end is sold.*
Tilt column and radio sold.
Trim sold.

Lots more...! Just ask, and I'll take pictures. And yes, I have PayPal.

Thanks!

[Cash3481]

I'll go first...
How much for the tilt column?
I'm interested pending pics and condition.
Mike

[Classic Heartbeat]

Also interested in the tilt, but you should read the rules about posting parts for sale.

XI. All For Sale posts shall have a price or prices, as well as your
location. No bids or auctions allowed here!!! If you don't know the
price of what you are selling, then you should do some research. If a Moderator or Administrator here asks you to post price(s) and you have not within a 12 hour time frame, they will delete your thread, period.

WES

[Steve Cole]

Put me 3rd in line on the tilt.

[PICKMUP]

What is the rearend gear ratio and is it posi?

[jpmanyhearts]

how does the floor pans look ? and how much for them ?

[thefraze_1020]

[QUOTE=Classic Heartbeat;6564649]Also interested in the tilt, but you should read the rules about posting parts for sale.


Wes- Sorry about that, please excuse the newbie.

Mike, Wes, Steve- I'd like $75 for the tilt steering column. Like I said, the wheel is pretty bad. The hazard switch is broken, shifter needle is broken. No horn button. The turn signals worked before pulled, shifted fine, tilt works fine. The signal and tilt levers need replaced. I had to cut the single gray wire, but it has a good long length. The big connector is intact.

[Fatherof3]

I'm interested in the trim set, what all is included?
Thanks

[thefraze_1020]

More steering column pictures:

[thefraze_1020]

asolde: I've got the bracket. $10 shipped.

PICKMUP: I'm not sure about the rear end. Pretty sure it's not posi. How can you tell what ratio it is? Also, I've got a guy locally who might be interested. I'll keep you posted.

jpmanyhearts: The floor pans are pretty trashed. I'll get you pictures in the morning.

Fatherof3: I'd sell you the top thin pieces, fender, door, cab corner, bed side. Also, large black lower pieces, fender, door, cab corner, bed side. I'd throw in the Custom Deluxe/ 10 emblems if you wanted 'em. I'd even give you the door edge guards. I'll take pictures in the morning.

[mtnbikerxt]

Do you have a front grill emblem? If so, pics and price shipped to 15239? Thanks

[thefraze_1020]

mtnbikerxt: No grille emblem. The grille was half gone when I got the truck. Sorry.

[Homebuilt Hotrods]

Originally Posted by thefraze_1020

asolde: I've got the bracket. $10 shipped.

PICKMUP: I'm not sure about the rear end. Pretty sure it's not posi. How can you tell what ratio it is? Also, I've got a guy locally who might be interested. I'll keep you posted.

jpmanyhearts: The floor pans are pretty trashed. I'll get you pictures in the morning.

Fatherof3: I'd sell you the top thin pieces, fender, door, cab corner, bed side. Also, large black lower pieces, fender, door, cab corner, bed side. I'd throw in the Custom Deluxe/ 10 emblems if you wanted 'em. I'd even give you the door edge guards. I'll take pictures in the morning.

Id like to buy that bracket for asolde I owe him one and cant find one.

[thefraze_1020]

Originally Posted by Homebuilt Hotrods

Id like to buy that bracket for asolde I owe him one and cant find one.

You got it. $10 via PayPal. My email is cameron.frazer1020@gmail.com.

If you pay tonight or tomorrow, it'll be in the mail Monday.

[BKSS67]

Interested in the radio pending pictures of it

Thanks

[Homebuilt Hotrods]

Originally Posted by thefraze_1020

You got it. $10 via PayPal. My email is cameron.frazer1020@gmail.com.

If you pay tonight or tomorrow, it'll be in the mail Monday.

payment made but please ship to asolde. I will try to get his address for you. Or if he can pm you...

[BowDown916]

any control arms??

[mtnbikerxt]

No problem on the emblem. Any chance you have a brake booster and mount/linkage? Thanks

[thefraze_1020]

BowDown916: On the rear you mean? It's a coil spring rear. I've got a guy here in NW WA possibly wanted the diff, but yes, I still have the control arms. Tomorrow I'm gonna pull the bed off, then I'll get back to you.

mtnbikerxt: Sorry, I sold the booster and mount today. But I have the brake pedal assembly.

[thefraze_1020]

Originally Posted by BKSS67

Interested in the radio pending pictures of it

Thanks

Here are radio pics. It has the slightest pitting on the "GM" face. No rust on it from what I can tell. It goes through the dial freely. And the station preset buttons seem to function correctly. The wires on the back are cut. I've got the knobs and hardware.

If you're serious, I'd go $42 on it ($30 for the radio, $12 for shipping in a Flat Rate box).

[BowDown916]

Ok cool..
Pm me some pics please..
Thanks

[thefraze_1020]

Will do as soon as I get the bed off!

[Classic Heartbeat]

I'll take the tilt column. I have a guy who will rebuild it. How do you want paid? I can issue a fedex call tag on it. WES

[thefraze_1020]

Do you have PayPal? If so, that's the best way.

Any suggestions on shipping?

[Classic Heartbeat]

Yes I have paypal. I can send you a fedex shipping label in your email also. I would request you pull the wheel and toss it away. Then take the lower shaft off so you can use a smaller package to ship it in. Just tape the lower shaft to the column. WES