Power Door Locks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DanoDMano · 07-24-2003, 09:41 PM

I am getting tired of having to reach over everytime
to lock the passenger door, and using my key to lock
the drivers side.

Call it lazy, but I'll bet some of you guy's can relate.

Have any of you used this product yet, and if so, was it
a bummer to put in?

The price is definitely right to me!!

http://www.a1electric.com/Merchant2/...Code=W01-RF104

Low69CST · 07-24-2003, 09:53 PM

I put those same solenoids in my doors in a keyless entry kit. If your lazy, then get someone else to do it. I spent about 2 weeks making, scrapping, and making new things to make those thing work with the rods in these doors.

krazy_texan · 07-24-2003, 10:04 PM

look at lmc or jc whitney they have kits that are for our trucks that work by turning the the lock with your key.

my new 72 · 07-24-2003, 10:42 PM

Get the A-1 kit. I did and wired it to my alarm and I love it. Only took me about two hours to get everything installed and adjusted right. I too the pop rods and cut them down to about three inches long and flipped them upside-down so you couldn't just reach in and pull up the lock and open the door. don't go the LMC or JC way though, A-1 has great customer service and support if you get stuck, neither of those two do.

pissonNOS · 07-25-2003, 01:12 AM

dano how bout some pics of your truck i know you posted them a while back but i want to see what ur rims look like again
thanks jason

DanoDMano · 07-25-2003, 02:08 AM

Here is one.

Getting ready to drop in a Stall convertor, Cam, New 4 barrel,
and an HEI. Hope to go a little faster after that!!

pissonNOS · 07-25-2003, 02:28 PM

thank you

07-24-2003, 09:41 PM	#1
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Power Door Locks I am getting tired of having to reach over everytime to lock the passenger door, and using my key to lock the drivers side. Call it lazy, but I'll bet some of you guy's can relate. Have any of you used this product yet, and if so, was it a bummer to put in? The price is definitely right to me!! http://www.a1electric.com/Merchant2/...Code=W01-RF104 __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

07-24-2003, 09:53 PM	#2
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	I put those same solenoids in my doors in a keyless entry kit. If your lazy, then get someone else to do it. I spent about 2 weeks making, scrapping, and making new things to make those thing work with the rods in these doors. __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

07-24-2003, 10:04 PM	#3
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	look at lmc or jc whitney they have kits that are for our trucks that work by turning the the lock with your key. __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

07-24-2003, 10:42 PM	#4
my new 72 faster, faster, faster Join Date: Dec 2001 Location: Houston ,Texas ,USA Posts: 1,354	Get the A-1 kit. I did and wired it to my alarm and I love it. Only took me about two hours to get everything installed and adjusted right. I too the pop rods and cut them down to about three inches long and flipped them upside-down so you couldn't just reach in and pull up the lock and open the door. don't go the LMC or JC way though, A-1 has great customer service and support if you get stuck, neither of those two do. __________________ I'm going to Law School, wanna debate? It's good practice.

07-25-2003, 01:12 AM	#5
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	dano how bout some pics of your truck i know you posted them a while back but i want to see what ur rims look like again thanks jason __________________ 69 GMC bagged

07-25-2003, 02:08 AM	#6
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Here is one. Getting ready to drop in a Stall convertor, Cam, New 4 barrel, and an HEI. Hope to go a little faster after that!! Attached Images __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

07-25-2003, 02:28 PM	#7
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	thank you __________________ 69 GMC bagged



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.