47-53 running board filler panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BlueJeep · 03-13-2014, 08:26 PM

Does anyone have any close up pictures of 47-53 running board filler panels? I'm specifically looking for what the tab that bolts to the rear fenders is supposed to look like, mine were gone. I need to re-create them and I'm trying to see what they should look like when done.

Looking for a close up of the back side of the tab:

Thanks!

**mr48chev** · 03-13-2014, 09:23 PM

I've got a pair of long wheel base board sitting on saw horses with the fillers on them at home, Let me see if they are all together so I can take a photo or two in about an hour. Everything should be the same except the length.

**mr48chev** · 03-13-2014, 10:54 PM

Here is the best photo

link to the four photos that look somewhat presentable plus the bracket on the front end.
http://s173.photobucket.com/user/mr4...?sort=4&page=1

I didn't get any measurements though.

BlueJeep · 03-14-2014, 09:16 PM

Thank you Mr48chev! Looks like it might be thicker than the panel itself, maybe 16 ga?

03-13-2014, 08:26 PM	#1
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	47-53 running board filler panels Does anyone have any close up pictures of 47-53 running board filler panels? I'm specifically looking for what the tab that bolts to the rear fenders is supposed to look like, mine were gone. I need to re-create them and I'm trying to see what they should look like when done. Looking for a close up of the back side of the tab: Thanks! __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

03-13-2014, 09:23 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: 47-53 running board filler panels I've got a pair of long wheel base board sitting on saw horses with the fillers on them at home, Let me see if they are all together so I can take a photo or two in about an hour. Everything should be the same except the length. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-13-2014, 10:54 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: 47-53 running board filler panels Here is the best photo link to the four photos that look somewhat presentable plus the bracket on the front end. http://s173.photobucket.com/user/mr4...?sort=4&page=1 I didn't get any measurements though. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-14-2014, 09:16 PM	#4
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: 47-53 running board filler panels Thank you Mr48chev! Looks like it might be thicker than the panel itself, maybe 16 ga? __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.