Sport Mirror Backer Plate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tillik · 03-17-2014, 10:31 PM

06263291 and 06263292 are the NOS ones. Just picked up some driver quality sport mirrors and ordered some gaskets from GMC Pauls.

Does anyone have a creative way to mount these or good tips? I've saved some of the forums on proper mount locations.

Does anyone know if the Repo sport mirror backer plates work with the originals?

I may have to just design up my own custom set, once the mirrors arrive. Would be nice to have the exact dimensions but I think I can wing it. There is one NOS set on Ebay for 90 bucks + Shipping, but that's not worth it to me.

Thx in advance

Tillik · 03-17-2014, 10:34 PM

Well I found some basic dimensions. That should get me close.

imjeff · 03-17-2014, 10:43 PM

I think the repros are the same dimension, but they are just slightly curved steel that spreads the bearing surface. Half hour with a sandbag, drill, hammer and tap beats $90 any day!

**LockDoc** · 03-17-2014, 10:57 PM

-
Just use the rubber gasket for a pattern for the holes....

Here are the measurements.

http://67-72chevytrucks.com/vboard/s...d.php?t=179279

LockDoc

03-17-2014, 10:31 PM	#1
Tillik Registered User Join Date: Sep 2012 Location: Layton, Utah Posts: 186	Sport Mirror Backer Plate 06263291 and 06263292 are the NOS ones. Just picked up some driver quality sport mirrors and ordered some gaskets from GMC Pauls. Does anyone have a creative way to mount these or good tips? I've saved some of the forums on proper mount locations. Does anyone know if the Repo sport mirror backer plates work with the originals? I may have to just design up my own custom set, once the mirrors arrive. Would be nice to have the exact dimensions but I think I can wing it. There is one NOS set on Ebay for 90 bucks + Shipping, but that's not worth it to me. Thx in advance __________________ James B. 1967 Chevy Fleetside Shortbed 4X2 (Black & Beautiful) 1971 Chevy Fleetside Shortbed 4X4 (White & Rough)

03-17-2014, 10:34 PM	#2
Tillik Registered User Join Date: Sep 2012 Location: Layton, Utah Posts: 186	Re: Sport Mirror Backer Plate Well I found some basic dimensions. That should get me close. __________________ James B. 1967 Chevy Fleetside Shortbed 4X2 (Black & Beautiful) 1971 Chevy Fleetside Shortbed 4X4 (White & Rough)

03-17-2014, 10:43 PM	#3
imjeff Registered User Join Date: Feb 2008 Location: Tacoma Washington Posts: 890	Re: Sport Mirror Backer Plate I think the repros are the same dimension, but they are just slightly curved steel that spreads the bearing surface. Half hour with a sandbag, drill, hammer and tap beats $90 any day! __________________ I know a guy who's addicted to brake fluid. He says he can stop any time. 72 K10 396 75 Cj5 MPI 350 Chev 67 Chevelle 396, 4 speed 74 FXE 08 Tahoe

03-17-2014, 10:57 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,493	Re: Sport Mirror Backer Plate - Just use the rubber gasket for a pattern for the holes.... Here are the measurements. http://67-72chevytrucks.com/vboard/s...d.php?t=179279 LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.