Dana 60 Install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trukman1 · 07-27-2003, 01:33 AM

Finally completed installation of my Dana 60 TracLok front differential! Decided to completely rebuild the entire unit prior to installation...kind of a hassle but it's easier on stands than in the truck anyway. Thanks go to Larry and Chris, two great friends who helped make it all possible. The best part of these trucks are the many good friends we share our hobby with. Will try to post some pics as soon as I figure out how (computer illiterate). Just wanted to post this to celebrate a small victory. Personally, it's the little things that keep me going. What I didn't realize was the truck actually sets a little higher in the front now so the rear will have to up slightly to compensate. Good luck on everybody's projects!

**Yukon Jack** · 07-27-2003, 10:54 AM

Any pics of the axle project?

trukman1 · 07-27-2003, 12:43 PM

Yukon Jack,
Didn't even think to take pics but will be doing more in the future and will try to post those when I get'em. As I said, I am about as computer illiterate as can be. I'll just have to get out from under the truck enough to sit down and figure the picture stuff out. Hind Sight! Trukman1

BLAZERMAN · 07-27-2003, 04:16 PM

When I put my dana 60 in it raised me about 1", I allready had a 4" lift and instead of using a block under my steering arm I used a dodge arm and it worked out great.

07-27-2003, 01:33 AM	#1
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	Dana 60 Install Finally completed installation of my Dana 60 TracLok front differential! Decided to completely rebuild the entire unit prior to installation...kind of a hassle but it's easier on stands than in the truck anyway. Thanks go to Larry and Chris, two great friends who helped make it all possible. The best part of these trucks are the many good friends we share our hobby with. Will try to post some pics as soon as I figure out how (computer illiterate). Just wanted to post this to celebrate a small victory. Personally, it's the little things that keep me going. What I didn't realize was the truck actually sets a little higher in the front now so the rear will have to up slightly to compensate. Good luck on everybody's projects! __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps

07-27-2003, 10:54 AM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Any pics of the axle project? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-27-2003, 12:43 PM	#3
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	Yukon Jack, Didn't even think to take pics but will be doing more in the future and will try to post those when I get'em. As I said, I am about as computer illiterate as can be. I'll just have to get out from under the truck enough to sit down and figure the picture stuff out. Hind Sight! Trukman1 __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps

07-27-2003, 04:16 PM	#4
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	When I put my dana 60 in it raised me about 1", I allready had a 4" lift and instead of using a block under my steering arm I used a dodge arm and it worked out great. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.