KS Parting a 71 1/2 2wd with crashed bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 04-05-2014, 10:07 PM

Just hauled in today, I'm going to start parting next week HOPEFULLY.
NO shipping grill $150 for it complete-SOLD
front disc brake setup is SOLD
sliding rear window is SOLD
PS pump and brackets $70 shipped-SOLD
all 3 motor pullies $40 shipped (littletony has first dibs on these)-SOLD
4 core radiator looks pretty good $100 plus shipping
clutch fan $35 shipped-SOLD
shroud looks good, one small nick out of driver side $40 plus ship
PS box $65 shipped
750 double pumper-SOLD
high rise intake
Alot more parts ask and I will get pics and price BUT remember I'm not parting this till next
Thanks Randy

teeitup · 04-05-2014, 10:08 PM

mo

teeitup · 04-05-2014, 10:09 PM

moo

teeitup · 04-05-2014, 10:09 PM

last

**special-K** · 04-05-2014, 10:41 PM

How much for the bed? Sorry Randy,don't see anything I need. I just never had a chance to be first to post in one of your part-out threads and had to jump in. Some good stuff there!

Kennuck · 04-05-2014, 10:49 PM

Front sway bar and all brackets and hardware, shipped to 48060

teeitup · 04-05-2014, 10:53 PM

Tim, your too funny

your right it actually has alot of good parts on it

Kennuck, $75 shipped for it with brackets, no bolts and nuts, it will probably need new rubber bushings, most do

Thanks Randy

Littletony · 04-05-2014, 11:23 PM

Mr. Randy pm sent on the pwr steering bracket, alt bracket and the pulleys.

Hard_Rain420 · 04-05-2014, 11:23 PM

Hey Randy, I'll take the tail light trim w/ clips, the interior door s/s trim, the cowl rubber seal and the Keith Mars dealer insignias. all pending condition.

Thanks,

Rich

swamp rat · 04-05-2014, 11:33 PM

Quote:

Originally Posted by teeitup

mo

Rear bumper picks and how much to ship to 98387?

swamp rat · 04-05-2014, 11:34 PM

Next in line on the sway bar, i'll take it at $75

swamp rat · 04-05-2014, 11:45 PM

If your gonna rip the seat apart i do need the wire rods (if there wire not rolled cardboard)

teeitup · 04-05-2014, 11:48 PM

Littletony, PM'd you total

hard_rain420, Rich, sorry sold the taillight trim already. Cowl rubber seal is bad. Let me check the dealer emblems and door panel chrome

Swamprat, its would be costly to ship the small step bumper, I get $30 for them plus shipping. I can get pics of it. Your 2nd on sway bar, I'll give him till tomorrow night to decide. I'll also get with you on the 68 thread parts

Thanks Randy

chewiebarker · 04-05-2014, 11:54 PM

Does that air filter fit a rochester quadrajet 4bbl? If it does, how much for it shipped to 01921? Thanks.

teeitup · 04-05-2014, 11:55 PM

Steering wheel and shroud sold pending shipping price. Thanks

swamp rat · 04-05-2014, 11:56 PM

Quote:

Originally Posted by teeitup

Swamprat, its would be costly to ship the small step bumper, I get $30 for them plus shipping. I can get pics of it. Your 2nd on sway bar, I'll give him till tomorrow night to decide. I'll also get with you on the 68 thread parts

Thanks Randy

Humm, even greyhound?

teeitup · 04-06-2014, 12:02 AM

Sorry I don't use greyhound,

afcamaro · 04-06-2014, 12:06 AM

How much for the carb and intake?

swamp rat · 04-06-2014, 12:07 AM

Quote:

Originally Posted by teeitup

Sorry I don't use greyhound,

Well crap..

I may be willing to eat the shipping regardless..

BLAZERMAN · 04-06-2014, 12:09 AM

Randy, how much for the door panels and front bumper?

teeitup · 04-06-2014, 12:11 AM

I don't know Adam, I really have no idea what its worth. I have a guy asking on another website about the carb, I think its a 750 double pumper, Make me an offer, thats what he is going to do

Swamprat, sorry, its just to much hassle for me to get to their place to ship, fed ex picks up at my house, saves me time and gas

Thanks Randy

teeitup · 04-06-2014, 12:14 AM

Hey Rob, $35 for bumper without lights, pass bolt area has a little rust, I think it would cleanup. Door panels $40, they are pretty solid it seems, getting those dang screws out suck though. Thanks Randy

swamp rat · 04-06-2014, 12:16 AM

I understand about Greyhound Randy, i just thought if your regular shipper could ship it i may be able to eat the cost. But its all good.

teeitup · 04-06-2014, 12:22 AM

Fed ex will ship it, I'll get pics and once its off a shipping price. Thanks

Vintage Windmills · 04-06-2014, 12:26 AM

Randy,

Thinking on the grille, just how good is it?

Jud

04-05-2014, 10:07 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Parting a 71 1/2 2wd with crashed bed Just hauled in today, I'm going to start parting next week HOPEFULLY. NO shipping grill $150 for it complete-SOLD front disc brake setup is SOLD sliding rear window is SOLD PS pump and brackets $70 shipped-SOLD all 3 motor pullies $40 shipped (littletony has first dibs on these)-SOLD 4 core radiator looks pretty good $100 plus shipping clutch fan $35 shipped-SOLD shroud looks good, one small nick out of driver side $40 plus ship PS box $65 shipped 750 double pumper-SOLD high rise intake Alot more parts ask and I will get pics and price BUT remember I'm not parting this till next Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-08-2014 at 08:44 AM.

04-05-2014, 10:08 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 1/2 2wd with crashed bed mo Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-05-2014, 10:09 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 1/2 2wd with crashed bed moo Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-05-2014, 10:09 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 1/2 2wd with crashed bed last Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-05-2014, 10:41 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Parting a 71 1/2 2wd with crashed bed How much for the bed? Sorry Randy,don't see anything I need. I just never had a chance to be first to post in one of your part-out threads and had to jump in. Some good stuff there! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-05-2014, 10:49 PM	#6
Kennuck Registered User Join Date: Oct 2013 Location: Dresden, Ontario Posts: 647	Re: Parting a 71 1/2 2wd with crashed bed Front sway bar and all brackets and hardware, shipped to 48060 __________________ 1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear

04-05-2014, 10:53 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 1/2 2wd with crashed bed Tim, your too funny your right it actually has alot of good parts on it Kennuck, $75 shipped for it with brackets, no bolts and nuts, it will probably need new rubber bushings, most do Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-05-2014, 11:23 PM	#8
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Parting a 71 1/2 2wd with crashed bed Mr. Randy pm sent on the pwr steering bracket, alt bracket and the pulleys. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945 Last edited by Littletony; 04-05-2014 at 11:34 PM. Reason: spelling

04-05-2014, 11:23 PM	#9
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: Parting a 71 1/2 2wd with crashed bed Hey Randy, I'll take the tail light trim w/ clips, the interior door s/s trim, the cowl rubber seal and the Keith Mars dealer insignias. all pending condition. Thanks, Rich

04-05-2014, 11:34 PM	#11
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Parting a 71 1/2 2wd with crashed bed Next in line on the sway bar, i'll take it at $75 __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

04-05-2014, 11:45 PM	#12
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Parting a 71 1/2 2wd with crashed bed If your gonna rip the seat apart i do need the wire rods (if there wire not rolled cardboard) __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

04-05-2014, 11:48 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 1/2 2wd with crashed bed Littletony, PM'd you total hard_rain420, Rich, sorry sold the taillight trim already. Cowl rubber seal is bad. Let me check the dealer emblems and door panel chrome Swamprat, its would be costly to ship the small step bumper, I get $30 for them plus shipping. I can get pics of it. Your 2nd on sway bar, I'll give him till tomorrow night to decide. I'll also get with you on the 68 thread parts Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-05-2014, 11:54 PM	#14
chewiebarker Registered User Join Date: Feb 2014 Location: Boxford, MA Posts: 364	Re: Parting a 71 1/2 2wd with crashed bed Does that air filter fit a rochester quadrajet 4bbl? If it does, how much for it shipped to 01921? Thanks. __________________ 1971 K20 Suburban 2012 LS1500 4WD Suburban 2003 Honda Accord LX V6 (don't tell anyone) MY 'BUILD' THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=618915

04-05-2014, 11:55 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 1/2 2wd with crashed bed Steering wheel and shroud sold pending shipping price. Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-06-2014, 12:02 AM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 1/2 2wd with crashed bed Sorry I don't use greyhound, __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

04-06-2014, 12:06 AM	#18
afcamaro Registered User Join Date: Nov 2011 Location: topeka, ks Posts: 616	Re: Parting a 71 1/2 2wd with crashed bed How much for the carb and intake? __________________ '70 SWB 5.3/4l60e

04-06-2014, 12:09 AM	#20
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Parting a 71 1/2 2wd with crashed bed Randy, how much for the door panels and front bumper? __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

04-06-2014, 12:11 AM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 1/2 2wd with crashed bed I don't know Adam, I really have no idea what its worth. I have a guy asking on another website about the carb, I think its a 750 double pumper, Make me an offer, thats what he is going to do Swamprat, sorry, its just to much hassle for me to get to their place to ship, fed ex picks up at my house, saves me time and gas Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-06-2014, 12:14 AM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 1/2 2wd with crashed bed Hey Rob, $35 for bumper without lights, pass bolt area has a little rust, I think it would cleanup. Door panels $40, they are pretty solid it seems, getting those dang screws out suck though. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-06-2014, 12:16 AM	#23
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Parting a 71 1/2 2wd with crashed bed I understand about Greyhound Randy, i just thought if your regular shipper could ship it i may be able to eat the cost. But its all good. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

04-06-2014, 12:22 AM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 1/2 2wd with crashed bed Fed ex will ship it, I'll get pics and once its off a shipping price. Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-06-2014, 12:26 AM	#25
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 71 1/2 2wd with crashed bed Randy, Thinking on the grille, just how good is it? Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

Register or Log In To remove these advertisements.