Roddoor Door Panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**thinair** · 04-08-2014, 02:53 PM

Anyone on here use or have used these? I am interested in how you mounted them to the door.

flamingbig10 · 04-09-2014, 12:11 AM

I had on my truck they used a 3m hd velcro

**thinair** · 04-09-2014, 11:11 AM

Huh. How well did that keep the panels on? And about how many spots of velcro were there? And...about how big was each piece?

flamingbig10 · 04-09-2014, 04:38 PM

They had a adhesive backing like a 1"x1" piece, you'll just have to place them where ever it looks to be the best spot

S10Fan · 04-09-2014, 10:30 PM

I wasn't happy with the velcro stuff, added some trim screws, much better.

Two screws on the outer edge, two on the inner edge, two under the carpet panel at the bottom. The 6 screws combined with the armrest support makes the panel very durable.

**thinair** · 04-10-2014, 04:25 AM

Cool, Thanks guys.

04-08-2014, 02:53 PM	#1
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,002	Roddoor Door Panels Anyone on here use or have used these? I am interested in how you mounted them to the door.

04-09-2014, 12:11 AM	#2
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Roddoor Door Panels I had on my truck they used a 3m hd velcro __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

04-09-2014, 11:11 AM	#3
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,002	Re: Roddoor Door Panels Huh. How well did that keep the panels on? And about how many spots of velcro were there? And...about how big was each piece?

04-09-2014, 04:38 PM	#4
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Roddoor Door Panels They had a adhesive backing like a 1"x1" piece, you'll just have to place them where ever it looks to be the best spot __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

04-09-2014, 10:30 PM	#5
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: Roddoor Door Panels I wasn't happy with the velcro stuff, added some trim screws, much better. Two screws on the outer edge, two on the inner edge, two under the carpet panel at the bottom. The 6 screws combined with the armrest support makes the panel very durable. Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

04-10-2014, 04:25 AM	#6
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,002	Re: Roddoor Door Panels Cool, Thanks guys.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.