AZ Billet Aluminum Radio Plates

[mahanian]

For those of you who ordered one I have a complete list and will continue to send them out. Please take a look at the picture below, the radio plate was designed to accommodate all brands of stereos so some will have a small gap around the trim ring. If this bothers you let me know and I will send you a refund.

If you want one of the couple I have left they are $95 shipped for a polished one with fasteners, drill template and polishing cloth.

Thanks!

[jerrya59]

Jared, I still want mine. If there is a small gap, it will look better than the larger gap from the PO cutting the dash.

[Liz]

This is the new for sale thread for this product. The old one had gone far off track and is in review.
Sorry for the confusion to the seller and potential buyers. Please keep it on topic so Jared can keep track of who is purchasing
Thanks

[Mayo]

How much are these again?

[bpatrol]

I received mine. Looks great
thank you
bpatrol

[29od1]

Jared,
Could you post the exact inside dimensions of your plate so I can determine if my radio will fit correctly?
Thanks,
David

[70blackfish]

what is the price?

[snipescastle2]

I'd like one as well! Please post the price and if you could, post the total including shipping to zip code 64093....
Thanks!
Ben

[mahanian]

The opening through the radio plate is 7 1/8" x 2 1/16", The corners are opened up with a radius to allow the overlap of the sheetmetal of the cage to fit through.

The opening for the radio trim ring is 2 5/16" x 7 9/16". Of the dozens I measured, the largest radio trim ring was 7 1/2" and the smallest was 7 3/8". So you would have either a 1/32" gap on each side minimum or 3/32" gap on each side maximum (as shown in the picture above)

The remainder of the first batch is on it's way out, the second batch should be complete next week

I only have a handful of radio plates left for sale in the second batch, which is at the polisher now. The price is $95 shipped each which includes a fully polished trim ring, all mounting hardware, installation instructions with a drilling template, a polishing wipe.

[bpatrol]

I measured mine 71/8x21/16 in the back
and 73/8 x 25/16 in the front
bpatrol

[mahanian]

Glad you got it!

[chewysask]

Hey Jared was i in the first or second group for radio plates

Thanks Carey

[dnd1978]

Jared,

I want 1 polish billet aluminum. Please send me our payment info

[mahanian]

Originally Posted by chewysask

Hey Jared was i in the first or second group for radio plates

Thanks Carey

You are first up on the second batch

Originally Posted by dnd1978

Jared,

I want 1 polish billet aluminum. Please send me our payment info

PM sent

[mahanian]

I picked up the second batch today, I'll start shipping them this weekend

[CheyenneSuper72]

I will take a polished one. Pm sent.

[ls1c10]

pm sent

[Kennuck]

Got mine awhile ago. Top notch job on these, really makes the ugly cut dash look good and it still looks somewhat retro.

[jerrya59]

Originally Posted by Kennuck

Got mine awhile ago. Top notch job on these, really makes the ugly cut dash look good and it still looks somewhat retro.

I agree, installed mine last night, template worked perfect.... looks great! Thanks Jared

[lousyflyer]

Received mine. Very nice part.

[mahanian]

Thanks for the compliments, glad you guys like them!

For those in the second batch, sorry for the delay, I broke a few fingers and have been dealing with dr's and surgeons and didn't get them shipped out yet. I will get them all out this weekend. Thanks for your patience!

[IAFF2407]

If you have any left I'll take a polished one.
Thx, pm me payment method.
Al.

[mahanian]

All the radio plates have been mailed except 2 that I sent PM's for address info. Everyone should have received a PM from me with tracking info or it's tracked in Paypal. If you don't have shipping confirmation from me or Paypal please let me know.

I have a couple left if anyone wants to buy one

[diabloceto]

I will take one send me info on how to pay.

[1967chevytruckguy]

me 2 how much shipped to 31833