FS: Sway Bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigRed · 07-28-2003, 12:15 PM

I have a Front Sway Bar for sale. $30 plus shipping. I don't have the frame brackets but they are pretty cheap at the GM shop or in the junk yards. I painted it black but never put it on my truck.

Anyone interested just let me know.

Thanks!

apstguy · 07-28-2003, 02:15 PM

What size?

BigRed · 07-28-2003, 02:18 PM

I just knew somebody was going to ask that.

If I remember right, it's a 1 1/16th bar. I measured it way back but I've slept since then. I will check tonight and update the post to have the size. But I'm almost positive that's the size.

BigRed · 07-29-2003, 08:32 AM

Quote:

Originally posted by BigRed
I just knew somebody was going to ask that. If I remember right, it's a 1 1/16th bar. I measured it way back but I've slept since then. I will check tonight and update the post to have the size. But I'm almost positive that's the size.

Here's a picture of the bar. And by the way, it's 1 1/16.

TIMSPEED · 07-29-2003, 03:41 PM

I may have the PST Poly bushings for that bar. I got SOME bushings, not sure on the size, but I never even opened the bag (because I don't have sway bars) So, lemme see if they fit this bar..if they do, then if you want the bushings, I'll let em go cheap.

Sorry to hijack the thread, but I thought it'd be a good time to advertise em, since they would go WITH the bar (if you bought Scott's bar)

apstguy · 07-29-2003, 06:22 PM

Darn! I was hoping for a 1 1/8 or 1 1/4. I have a 1 1/16 on my truck already. Tim, if they fit the 1 1/16 bar I might want them.

TIMSPEED · 07-30-2003, 04:19 AM

Hmm..I'll have to try and find out..I THIINK they might be for the 1¼" though...I don't remember. I'll see if I can't find out. I know for a fact, I have 4 bushings/brackets though...so I guess it's for front/rear setup???

apstguy · 07-30-2003, 02:48 PM

No, the 2wd bars need 4 brackets.

TIMSPEED · 07-30-2003, 05:09 PM

Ohh ok.

BigRed · 07-30-2003, 05:59 PM

Yep, it should be one on each frame bracket and one on each a-arm if I remember correctly.

SCOTI · 07-30-2003, 06:55 PM

That's correct BigRed.

TIMSPEED · 07-31-2003, 02:41 PM

Yup, my poly bushings are for 1/16" bars.

So, I guess $45 for em. (Shipping is free so no worries there)
They're brand new PST's (Their black)

BigRed · 07-31-2003, 02:48 PM

Quote:

Originally posted by TIMSPEED
Yup, my poly bushings are for 1/16" bars. So, I guess $45 for em. (Shipping is free so no worries there)
They're brand new PST's (Their black)

Yep, what a deal. If somebody buys these bushings, I'll sell the bar for $30 including shipping. That's a whole setup for $75. Not bad.

TIMSPEED · 07-31-2003, 03:51 PM

Quote:

That's a whole setup for $75. Not bad.

Not when you consider PST sells the 1/16" Bar with the busings for $130...

07-28-2003, 12:15 PM	#1
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	FS: Sway Bar I have a Front Sway Bar for sale. $30 plus shipping. I don't have the frame brackets but they are pretty cheap at the GM shop or in the junk yards. I painted it black but never put it on my truck. Anyone interested just let me know. Thanks! __________________ Scott Shelbourne Last edited by BigRed; 07-28-2003 at 12:50 PM.

07-28-2003, 02:15 PM	#2
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	What size? __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

07-28-2003, 02:18 PM	#3
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	I just knew somebody was going to ask that. If I remember right, it's a 1 1/16th bar. I measured it way back but I've slept since then. I will check tonight and update the post to have the size. But I'm almost positive that's the size. __________________ Scott Shelbourne

07-29-2003, 03:41 PM	#5
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	I may have the PST Poly bushings for that bar. I got SOME bushings, not sure on the size, but I never even opened the bag (because I don't have sway bars) So, lemme see if they fit this bar..if they do, then if you want the bushings, I'll let em go cheap. Sorry to hijack the thread, but I thought it'd be a good time to advertise em, since they would go WITH the bar (if you bought Scott's bar) __________________ I have a few cars... See Them Here

07-29-2003, 06:22 PM	#6
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	Darn! I was hoping for a 1 1/8 or 1 1/4. I have a 1 1/16 on my truck already. Tim, if they fit the 1 1/16 bar I might want them. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

07-30-2003, 04:19 AM	#7
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Hmm..I'll have to try and find out..I THIINK they might be for the 1¼" though...I don't remember. I'll see if I can't find out. I know for a fact, I have 4 bushings/brackets though...so I guess it's for front/rear setup??? __________________ I have a few cars... See Them Here

07-30-2003, 02:48 PM	#8
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	No, the 2wd bars need 4 brackets. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

07-30-2003, 05:09 PM	#9
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Ohh ok. __________________ I have a few cars... See Them Here

07-30-2003, 05:59 PM	#10
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Yep, it should be one on each frame bracket and one on each a-arm if I remember correctly. __________________ Scott Shelbourne

07-30-2003, 06:55 PM	#11
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	That's correct BigRed. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-31-2003, 02:41 PM	#12
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Yup, my poly bushings are for 1/16" bars. So, I guess $45 for em. (Shipping is free so no worries there) They're brand new PST's (Their black) __________________ I have a few cars... See Them Here



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.