WV 1950 SWB frame, No Limit, 4 link - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**AspecialZ** · 04-19-2014, 05:44 PM

I started an ambitious project last year and unfortunately I cannot see it through at this time with my work schedule and other costly builds. So here is what I have to let go of. A 1950 GMC frame in good shape, A complete new in the box still No Limit Engineering "Air Glide 2" Setup with mounts already in place for a small block motor installed by No Limit. A complete Classis Industries Customs 4-link and panhard bar for the rear. A new gas tank from a late 60s mustang that I was going to modify for GM use between the frame rails. I'd like to sell this all as 1 package to re-coop some of the initial cost of the items. Their are no body parts with this truck, I have given them to a friend to finish his build. If interested you can e-mail me at scottcaldwell07@gmail.com or 304.670.0361. I'm located 1hr from downtown Pittsburgh in northern West Virginia. thank you.

http://www.classicindustries.com/tru.../hs900108.html

I have as most of you can probably attest too, $3600 in parts alone, I can also throw in the 9" ford rearend with 3:55 posi setup. Don't be afraid to make an offer or a possible trade on these items as well. I hate to see them just sitting on the shelves without attention. I am in the middle of a large air ride build on my 74 c10 swb stepside, I am looking for air management parts for that vehicle now and would consider trades for that build. thank you!

boonedogs72 · 04-29-2014, 04:25 PM

would you sell just the suspension components alone no chassis?

**AspecialZ** · 05-04-2014, 08:16 PM

yeah... I would consider that as well

Liddy71 · 05-10-2014, 03:12 PM

Thanks Scott Was good to meet you

**AspecialZ** · 05-11-2014, 12:21 AM

you as well

STOCKISH · 05-13-2014, 03:16 PM

Hey man, did everything sell, I'm still interested in just the frame if it's still around.

Liddy71 · 05-16-2014, 07:18 PM

I got the air glide and frame

jamieciambelli · 05-19-2014, 11:08 PM

Very interested in airglide if its still available. Pm me your price ..thanks

**AspecialZ** · 05-22-2014, 09:33 PM

I only have the bolt on 4 link setup left. Its going to the swap meet next month so if your interested in it please get at me. thanks.

**AspecialZ** · 06-10-2014, 06:10 PM

4 link is still available, I'm sure someone needs one. $400. this is setup to bolt directly to your original frame, this is not an aftermarket setup.

**AspecialZ** · 06-17-2014, 10:27 PM

bump for 4 link

04-19-2014, 05:44 PM	#1
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	1950 SWB frame, No Limit, 4 link I started an ambitious project last year and unfortunately I cannot see it through at this time with my work schedule and other costly builds. So here is what I have to let go of. A 1950 GMC frame in good shape, A complete new in the box still No Limit Engineering "Air Glide 2" Setup with mounts already in place for a small block motor installed by No Limit. A complete Classis Industries Customs 4-link and panhard bar for the rear. A new gas tank from a late 60s mustang that I was going to modify for GM use between the frame rails. I'd like to sell this all as 1 package to re-coop some of the initial cost of the items. Their are no body parts with this truck, I have given them to a friend to finish his build. If interested you can e-mail me at scottcaldwell07@gmail.com or 304.670.0361. I'm located 1hr from downtown Pittsburgh in northern West Virginia. thank you. http://www.classicindustries.com/tru.../hs900108.html I have as most of you can probably attest too, $3600 in parts alone, I can also throw in the 9" ford rearend with 3:55 posi setup. Don't be afraid to make an offer or a possible trade on these items as well. I hate to see them just sitting on the shelves without attention. I am in the middle of a large air ride build on my 74 c10 swb stepside, I am looking for air management parts for that vehicle now and would consider trades for that build. thank you! Attached Images __________________ Follow me on Instagram @ hot_rod_shop

04-29-2014, 04:25 PM	#2
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: 1950 SWB frame, No Limit, 4 link would you sell just the suspension components alone no chassis?

05-04-2014, 08:16 PM	#3
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: 1950 SWB frame, No Limit, 4 link yeah... I would consider that as well __________________ Follow me on Instagram @ hot_rod_shop

05-10-2014, 03:12 PM	#4
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: 1950 SWB frame, No Limit, 4 link Thanks Scott Was good to meet you

05-11-2014, 12:21 AM	#5
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: 1950 SWB frame, No Limit, 4 link you as well __________________ Follow me on Instagram @ hot_rod_shop

05-13-2014, 03:16 PM	#6
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 1950 SWB frame, No Limit, 4 link Hey man, did everything sell, I'm still interested in just the frame if it's still around. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-16-2014, 07:18 PM	#7
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: 1950 SWB frame, No Limit, 4 link I got the air glide and frame

05-19-2014, 11:08 PM	#8
jamieciambelli Registered User Join Date: Jan 2013 Location: londonk, KY Posts: 5	Re: 1950 SWB frame, No Limit, 4 link Very interested in airglide if its still available. Pm me your price ..thanks

05-22-2014, 09:33 PM	#9
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: 1950 SWB frame, No Limit, 4 link I only have the bolt on 4 link setup left. Its going to the swap meet next month so if your interested in it please get at me. thanks. __________________ Follow me on Instagram @ hot_rod_shop

06-10-2014, 06:10 PM	#10
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: 1950 SWB frame, No Limit, 4 link 4 link is still available, I'm sure someone needs one. $400. this is setup to bolt directly to your original frame, this is not an aftermarket setup. __________________ Follow me on Instagram @ hot_rod_shop

06-17-2014, 10:27 PM	#11
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: 1950 SWB frame, No Limit, 4 link bump for 4 link __________________ Follow me on Instagram @ hot_rod_shop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.