Wilwood big brake kit on 67 c10... HELP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Parishchief1 · 04-19-2014, 06:08 PM

I'm looking into buying the Wilwood big brake kit with the 14" rotors 6 piston calipers up front & 13" rotors 4 piston calipers in the rear but my truck has a non power brake setup and I'm just trying to find out what would be the best setup as far as brake booster and Wilwood master cylinders? If anyone can help that would be great. Thanks

cableguy0 · 04-19-2014, 09:10 PM

Your best bet is to probably call wilwood . Their stuff is nowhere near stock and I would want their advice. I have used a few of their manual brake setups and the vehicles stopped great.

CHRIS67GMC · 04-20-2014, 08:47 AM

This is the same setup I run except I have 14" rear rotors. I would not run power brakes. Run manual with a 7/8 master. If you need a place to order give me a call 419-448-8080

Parishchief1 · 04-20-2014, 09:40 PM

Quote:

Originally Posted by CHRIS67GMC

This is the same setup I run except I have 14" rear rotors. I would not run power brakes. Run manual with a 7/8 master. If you need a place to order give me a call 419-448-8080

Thanks I think that's the route I'm gonna go

**Hart_Rod** · 06-12-2014, 02:07 PM

Quote:

Originally Posted by CHRIS67GMC

This is the same setup I run except I have 14" rear rotors. I would not run power brakes. Run manual with a 7/8 master. If you need a place to order give me a call 419-448-8080

Why no power Chris?

**N2TRUX** · 06-13-2014, 10:31 AM

Quote:

Originally Posted by Hart_Rod

Why no power Chris?

You dont need it from what I have been told. Roger at RPL Customs, and Keith (N2billet) use this method on all their builds with good results.

jmedero · 06-17-2014, 11:03 AM

C10seconds is a member on this board. He has this frot set up for sale. He has gone a diff route with his build and you can save some $$$$. Look him up.

chevyguy_72 · 06-18-2014, 02:20 PM

Quote:

Originally Posted by CHRIS67GMC

This is the same setup I run except I have 14" rear rotors. I would not run power brakes. Run manual with a 7/8 master. If you need a place to order give me a call 419-448-8080

I am curious about this as well... I have the same setup... I was planning on doing the hydroboost for some power...

c10seconds · 06-20-2014, 02:16 PM

Quote:

Originally Posted by jmedero

C10seconds is a member on this board. He has this frot set up for sale. He has gone a diff route with his build and you can save some $$$$. Look him up.

Thanks jmedero.

I do have a really nice set of front 14.25'' wilwoods with red W6A calipers available if you're interested. The calipers are huge! They have been mocked up but never any fluid ran through them.

Let me know

jmedero · 06-20-2014, 10:30 PM

I really wished they would have worked with my set up but someone can get a smoking deal.

Ek2reme · 07-08-2014, 02:59 AM

Quote:

Originally Posted by c10seconds

Thanks jmedero.

I do have a really nice set of front 14.25'' wilwoods with red W6A calipers available if you're interested. The calipers are huge! They have been mocked up but never any fluid ran through them.

Let me know

C10seconds,
Did you sell those brakes?

04-19-2014, 06:08 PM	#1
Parishchief1 Registered User Join Date: Mar 2014 Location: New orleans Posts: 28	Wilwood big brake kit on 67 c10... HELP I'm looking into buying the Wilwood big brake kit with the 14" rotors 6 piston calipers up front & 13" rotors 4 piston calipers in the rear but my truck has a non power brake setup and I'm just trying to find out what would be the best setup as far as brake booster and Wilwood master cylinders? If anyone can help that would be great. Thanks

04-19-2014, 09:10 PM	#2
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: Wilwood big brake kit on 67 c10... HELP Your best bet is to probably call wilwood . Their stuff is nowhere near stock and I would want their advice. I have used a few of their manual brake setups and the vehicles stopped great. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

04-20-2014, 08:47 AM	#3
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Wilwood big brake kit on 67 c10... HELP This is the same setup I run except I have 14" rear rotors. I would not run power brakes. Run manual with a 7/8 master. If you need a place to order give me a call 419-448-8080

06-17-2014, 11:03 AM	#7
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Wilwood big brake kit on 67 c10... HELP C10seconds is a member on this board. He has this frot set up for sale. He has gone a diff route with his build and you can save some $$$$. Look him up. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

06-20-2014, 10:30 PM	#10
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Wilwood big brake kit on 67 c10... HELP I really wished they would have worked with my set up but someone can get a smoking deal. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.