|
07-29-2003, 01:18 PM
|
#1 |
|
The Sauz
Join Date: Mar 2002
Location: Chilliwack BC, Canada
Posts: 149
|
Tailgate removal
Am I doomed to sitting here for an hour with a box end and a beer to get my tailgate off,
or are these things supposed to have the cut-out so you can slide them off one side like the newer ones? Or am i completely missing something, like a brain. 
__________________
68 lwb 2wd (spread between 3 garages) 72 Burb - Flat Deck 92 Yukon 3" lift - 33's - the new bush pig 01 Sierra - Daily Driver (for now) |
|
|
|
07-29-2003, 01:21 PM
|
#2 |
|
Resident Curmudgeon
 
Join Date: Dec 1999
Location: NH
Posts: 6,662
|
Assuming fleetside, you have to unbolt one of the lower trunions (lower pivot point hinge), and lift up tailgate on that side removing trunion and all.
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter  Maybe I need to sell some of this crap  Yet another Bozo with a sawz-all |
|
|
|
|
07-29-2003, 01:23 PM
|
#3 |
|
Project Junkie! Fishing Poor!!
 
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,766
|
Take one of the trunions (lower hinge) loose. They are held in place with two 1/2" bolts. Once you do that then you can raise the tailgate on that end and pull the gate and trunion out. You also need to take the links loose and the way you do that is to push up at the joint and lift the tailgate untill the slot lines up with the pin on the tailgate. WES www.ClassicHeartbeat.com
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
|
|
|
|
07-29-2003, 01:24 PM
|
#4 |
|
Project Junkie! Fishing Poor!!
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,766
|
LOL, You beat me to the punch Jeff.... WES www.ClassicHeartbeat.com
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
|
|
|
|
07-29-2003, 01:26 PM
|
#5 |
|
Resident Curmudgeon
Join Date: Dec 1999
Location: NH
Posts: 6,662
|
Yes, but you were more "eloquent" Wes!
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all |
|
|
|
|
07-29-2003, 02:06 PM
|
#6 |
|
Finish the'71..or bust!
Join Date: Jun 2003
Location: Nashville, TN.
Posts: 441
|
Thats funny...
I took mine off for the first time yesterday and was wondering about the procedure. Fortunately I had a Haynes manual for the truck lying around.... Do it like described above (removing one of the trunnions and pushing UPWARD on the joint of the supports to line up the slots that connect them to the gate). I'm a complete novice and it took all of 3 minutes. Still, it is an excellent an excuse to sit there for an hour with a wrench and a few brewskis...just admiring the handiwork of The General...and being glad you own it! It works for me all the time...and the wife is non the wiser! LOL
|
|
|
|
|
07-29-2003, 02:51 PM
|
#7 |
|
Registered User
Join Date: Mar 2003
Location: kansas
Posts: 1,071
|
i just cut slots in my so it slids on and off like the newer ones. i wasnt too worried about my tailgate though since it is a little rusty and needs to be replaced.
__________________
'67 c10 350/th350 |
|
|
|
|
07-30-2003, 12:29 AM
|
#8 |
|
huh ???
Join Date: Nov 2002
Location: Fredericksburg,Va.
Posts: 3,368
|
My dad modified mine in 84. It's an easy job and still has the strength.
__________________
90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!" |
|
|
|
|
07-30-2003, 12:30 AM
|
#9 |
|
huh ???
Join Date: Nov 2002
Location: Fredericksburg,Va.
Posts: 3,368
|
and...
Chuck
__________________
90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!" |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
