Temp sending unit '59 Gmc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCHRUMGMC · 04-23-2014, 10:45 PM

The one that is on my truck is bad, and I have been told that it is the wrong one

The people with the Gmc's can you see if you have the correct one?

I'm sorta lost

SCHRUMGMC · 04-23-2014, 11:54 PM

Anyone?

lowrodderchev · 04-24-2014, 09:58 AM

I was in the same boat once there should be a number on it

lowrodderchev · 04-24-2014, 10:00 AM

Oops posted before finished I will check my 6 cylinder but I believe the guy at auto parts gave me one out of v8 Chevy but it works

SCHRUMGMC · 04-24-2014, 10:44 AM

I just wonder if its correct

OrrieG · 04-24-2014, 11:58 AM

Quick look online shows the type with a round "t" top for slide on connector. Two part numbers came up PM152 and PM153. I am using the original from my 235 which is that type, next time I go out I will see what the PN is. If the sensor with the right resistance is not used the gauge will read high or low. New ones are $12.

lowrodderchev · 04-24-2014, 12:04 PM

Quote:

Originally Posted by SCHRUMGMC

I just wonder if its correct

in that case I would say yes mine looks just like that one but like he said they have different resitance

SCHRUMGMC · 04-24-2014, 12:16 PM

Well I bought one locally from a Good place... Installing it now...Cutting the prong off and putting on the new end clip

04-23-2014, 10:45 PM	#1
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Temp sending unit '59 Gmc The one that is on my truck is bad, and I have been told that it is the wrong one The people with the Gmc's can you see if you have the correct one? I'm sorta lost Attached Images __________________ 1971 GMC Sierra 1959 GMC 100

04-23-2014, 11:54 PM	#2
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: Temp sending unit '59 Gmc Anyone? __________________ 1971 GMC Sierra 1959 GMC 100

04-24-2014, 09:58 AM	#3
lowrodderchev Registered User Join Date: Dec 2011 Location: visalia ca Posts: 1,480	Re: Temp sending unit '59 Gmc I was in the same boat once there should be a number on it __________________ my 57 chevy truck build http://67-72chevytrucks.com/vboard/s...d.php?t=601554

04-24-2014, 10:00 AM	#4
lowrodderchev Registered User Join Date: Dec 2011 Location: visalia ca Posts: 1,480	Re: Temp sending unit '59 Gmc Oops posted before finished I will check my 6 cylinder but I believe the guy at auto parts gave me one out of v8 Chevy but it works __________________ my 57 chevy truck build http://67-72chevytrucks.com/vboard/s...d.php?t=601554

04-24-2014, 10:44 AM	#5
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: Temp sending unit '59 Gmc I just wonder if its correct __________________ 1971 GMC Sierra 1959 GMC 100

04-24-2014, 11:58 AM	#6
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Temp sending unit '59 Gmc Quick look online shows the type with a round "t" top for slide on connector. Two part numbers came up PM152 and PM153. I am using the original from my 235 which is that type, next time I go out I will see what the PN is. If the sensor with the right resistance is not used the gauge will read high or low. New ones are $12. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

04-24-2014, 12:16 PM	#8
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: Temp sending unit '59 Gmc Well I bought one locally from a Good place... Installing it now...Cutting the prong off and putting on the new end clip __________________ 1971 GMC Sierra 1959 GMC 100



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.