wiring

[Dirtkid93]

does anyone have a wiring diagram for a 1964 chevy c20 pickup that's converted to 12 volt system that they would be kind enough to send me the pages? I'm not sure if I need a new harness or not and can't seem to find the proper diagram online. thanks guys!

[KJSR]

http://67-72chevytrucks.com/vboard/s...d.php?t=378484

[Woogeroo]

converted to a 12 volt system?

I'm pretty sure they were 12v stock... with a generator.

check the electrical threads in the 60-66 FAQ Index.

Also, the 60-66 truck links in the External Links, Section 3 area.

-W

[tincan1966]

Yep by 1964 they were all 12 volt and even had alternators, too!

[PGSigns]

What problems are you having. Some pretty sharp guys here.
Jimmy

[Dirtkid93]

Originally Posted by PGSigns

What problems are you having. Some pretty sharp guys here.
Jimmy

i have running lights in the rear but i press the brake pedal and they don't brighten, ( I'm aware this could be a ground issue and am checking as i type this ) my blinkers go at the speed of light ( could also be ground or relay )

anyway, the previous owner * attempted * to install a new harness but ended up n***er rigging everything and just left it all hanging in a giant electrical tape mess under the dash, fuel and temp gauge don't work ( could be sending unit or again a ground or power issue )
its a huge mess, ill post pictures later tonight

[siggyfreud]

Originally Posted by Dirtkid93

anyway, the previous owner * attempted * to install a new harness but ended up n***er rigging everything

Really dude? About 100 other ways to describe how the previous owner botched the install and you went there . . .

Have fun with your electrical.

[Kingjasn]

Originally Posted by siggyfreud

Really dude? About 100 other ways to describe how the previous owner botched the install and you went there . . .

Have fun with your electrical.

yeah, X2. was thinking about trying to help,but I don't think your kind of people would appreciate it anyway....

just my opinion, hope you got as offended as I did.

[earl84]

Originally Posted by kingjasn

yeah, x2. Was thinking about trying to help,but i don't think your kind of people would appreciate it anyway....

Just my opinion, hope you got as offended as i did.

x3

[tincan1966]

X4 totally agree with the others.

Good luck!

[19666Trucker]

Lame choice of words, better selling that truck.

[Kingjasn]

kicking a dog here, but just couldn't help myself....



not surprising.

[66LSx]

Don't worry... the posts get better

Posted By Dirtkid93
carb

my 1964 chevy c20 has a dinky 1 barrel carb mounted to my 230 inline 6 ( would swap to a 2 barrel but mpg is already bad enough ) i have to run the choke about 50/50, fully open and it just stalls,...

Posted By Dirtkid93
gearing??

okay guys so i just picked up my 64' c20.
it's a 230 3.8 liter inline 6 engine. 4 speed on the floor, with granny gear. the thing takes forever to get to speed and barely maintains 65 mph, steady...

Posted By Dirtkid93
gearing??
now if anyone knows a thing or two about cb radios, please answer this as well, i want to run dual whips off of my truck, was looking at cobra 29 ltd with weather, PA, night watch, or a galaxy ( not sure if thats too extreme ) but whats the best rout to do what i want?

Posted By Dirtkid93
gearing??
AC
trucks already been converted to 12V. what is a good temporary ac fix? would anyone put in a fan?