WI Wanted 1967-1968 gmc air cleaner - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**60-66** · 05-07-2014, 10:56 AM

Looking for an original 67 68 GMC air cleaner. Single snorkel. Opening on the end is about 3 1/4 wide. Post pictures of what you have. THANKS !

**jmader** · 05-07-2014, 03:17 PM

What engine are you looking for? I have one off a 67 GMC with a V6.

**60-66** · 05-07-2014, 03:50 PM

Yes, one off the 305 V6 but not an oil bath. Has a long wide snorkel

**jmader** · 05-07-2014, 04:02 PM

This one is off a 351. I'll post a picture as soon as I can.

**jmader** · 05-07-2014, 10:23 PM

This is what I have. It doesn't seem to be what you're looking for. It would clean up really nice if you're interested.

**60-66** · 05-08-2014, 08:40 AM

I believe that IS the one but yours I believe has the snorkel cut off. Thanks for posting. Still looking

**uncle** · 05-08-2014, 03:09 PM

This it?

**uncle** · 05-08-2014, 03:10 PM

Has very small bend on outer snorkel.

**60-66** · 05-08-2014, 03:46 PM

THATS IT !!! As long as there no holes drilled in the bottom of the snorkel ? What would you want shipped to 53182 ? And Im looking for another one if anyone else has one.

**uncle** · 05-08-2014, 09:48 PM

Get a quote over the weekend.

**uncle** · 05-11-2014, 04:55 PM

50+17 shipping. $67 total.

**60-66** · 05-20-2014, 07:22 AM

Thanks Uncle. Air cleaner Looks good, great shipping !!

I still want to buy another one of these if anyone has another ?!

**60-66** · 07-20-2014, 10:32 AM

ttt

Wrenchbender Ret · 07-20-2014, 11:09 AM

I have this one. It measures 2 5/8 opening where it goes on the carb.
$30 plus shipping.
George

**60-66** · 07-20-2014, 11:26 AM

Thank you but I'm looking for the exact one in post #7 and 8 for gmc v6. Jon

**60-66** · 09-21-2014, 04:44 PM

Still looking for the one in picture POST NUMBER 7

**60-66** · 09-30-2014, 10:30 AM

ttt

**60-66** · 11-18-2014, 11:12 AM

ttt

**60-66** · 01-06-2015, 02:58 PM

ttt

budnikguy · 03-17-2015, 11:48 AM

I may have one for ya....jusr starting to part a 351e , 67 GMC truck.

**60-66** · 03-17-2015, 11:51 AM

Great , looks like the one in post #7 and 8 . Thanks !!

**RogerKoop** · 03-17-2015, 08:34 PM

I've got one. I'll take pics tomorrow and post them.

**60-66** · 03-17-2015, 09:46 PM

Cool ! Two in one day ? Interested in both !

budnikguy · 03-17-2015, 10:38 PM

Posted pics here ....lmk

http://67-72chevytrucks.com/vboard/s...d.php?t=663856

Quote:

Originally Posted by 60-66

Cool ! Two in one day ? Interested in both !

**60-66** · 03-17-2015, 10:48 PM

That's it ! Ill take the air cleaner . Pm me your info

05-07-2014, 10:56 AM	#1
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Wanted 1967-1968 gmc air cleaner Looking for an original 67 68 GMC air cleaner. Single snorkel. Opening on the end is about 3 1/4 wide. Post pictures of what you have. THANKS ! __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

05-07-2014, 03:17 PM	#2
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Wanted 1967-1968 gmc air cleaner What engine are you looking for? I have one off a 67 GMC with a V6. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

05-07-2014, 03:50 PM	#3
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner Yes, one off the 305 V6 but not an oil bath. Has a long wide snorkel __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

05-07-2014, 04:02 PM	#4
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Wanted 1967-1968 gmc air cleaner This one is off a 351. I'll post a picture as soon as I can. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

05-07-2014, 10:23 PM	#5
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Wanted 1967-1968 gmc air cleaner This is what I have. It doesn't seem to be what you're looking for. It would clean up really nice if you're interested. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

05-08-2014, 08:40 AM	#6
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner I believe that IS the one but yours I believe has the snorkel cut off. Thanks for posting. Still looking __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

05-08-2014, 03:09 PM	#7
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: Wanted 1967-1968 gmc air cleaner This it? Attached Images

05-08-2014, 03:10 PM	#8
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: Wanted 1967-1968 gmc air cleaner Has very small bend on outer snorkel. Attached Images

05-08-2014, 03:46 PM	#9
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner THATS IT !!! As long as there no holes drilled in the bottom of the snorkel ? What would you want shipped to 53182 ? And Im looking for another one if anyone else has one. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

05-08-2014, 09:48 PM	#10
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: Wanted 1967-1968 gmc air cleaner Get a quote over the weekend.

05-11-2014, 04:55 PM	#11
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: Wanted 1967-1968 gmc air cleaner 50+17 shipping. $67 total.

05-20-2014, 07:22 AM	#12
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner Thanks Uncle. Air cleaner Looks good, great shipping !! I still want to buy another one of these if anyone has another ?! __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

07-20-2014, 10:32 AM	#13
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner ttt __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

07-20-2014, 11:09 AM	#14
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,204	Re: Wanted 1967-1968 gmc air cleaner I have this one. It measures 2 5/8 opening where it goes on the carb. $30 plus shipping. George Attached Images

07-20-2014, 11:26 AM	#15
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner Thank you but I'm looking for the exact one in post #7 and 8 for gmc v6. Jon __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK



Register or Log In To remove these advertisements.

09-21-2014, 04:44 PM	#16
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner Still looking for the one in picture POST NUMBER 7 __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

09-30-2014, 10:30 AM	#17
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner ttt __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

11-18-2014, 11:12 AM	#18
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner ttt __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

01-06-2015, 02:58 PM	#19
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner ttt __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

03-17-2015, 11:48 AM	#20
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Wanted 1967-1968 gmc air cleaner I may have one for ya....jusr starting to part a 351e , 67 GMC truck.

03-17-2015, 11:51 AM	#21
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner Great , looks like the one in post #7 and 8 . Thanks !! __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

03-17-2015, 08:34 PM	#22
RogerKoop Senior Member Join Date: Nov 2012 Location: Shawnee, KS Posts: 1,807	Re: Wanted 1967-1968 gmc air cleaner I've got one. I'll take pics tomorrow and post them. __________________ Roger Koop

03-17-2015, 09:46 PM	#23
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner Cool ! Two in one day ? Interested in both ! __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

03-17-2015, 10:48 PM	#25
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wanted 1967-1968 gmc air cleaner That's it ! Ill take the air cleaner . Pm me your info __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

Register or Log In To remove these advertisements.