KS parting 72 chevy c20 custom camper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 05-15-2014, 06:10 PM

I'm going to try to start parting this truck this weekend. I have a 72 1/2 I have to go get Sat morning so depending on how long it takes to get camper off it, it may be only Sun parting some.

Front fenders are good $60 each, if you want me to ship these figure $100 each for shipping alone
outer grill is nice if someone has time to work the bend out of lower part. $50 no ship
Doors are pretty good, no ship

ASK ALL Questions in thread
Thanks Randy

teeitup · 05-15-2014, 06:11 PM

16

teeitup · 05-15-2014, 06:11 PM

21

teeitup · 05-15-2014, 06:12 PM

26

**72 Super** · 05-15-2014, 07:01 PM

Hi Randy, could I get a price on engine lift hooks, water neck
Was it running? If So is the carb original ?
Thanks,
Ray

**72 Super** · 05-15-2014, 07:02 PM

Also oil fill tube.
Thanks
Ray

**Already Gone** · 05-15-2014, 07:20 PM

If you will sell it seperatly, the A/C centre vent with the rear bracket that holds it in and the glove box door. How much via mail to Canada?

**71blksuper4x4** · 05-15-2014, 07:24 PM

Randy, how about the back wheels? 16.5 x 8.25? Also, how nice are the Custom Camper emblems? Thanks Trevor

Youey · 05-15-2014, 07:40 PM

could you give me a price on gas petal assembly and rod to carb, and the visors look good are they, how much ?

mx289 · 05-15-2014, 07:50 PM

In line for the custom camper emblems.

**bobvilla67** · 05-15-2014, 07:54 PM

Hi Randy. I'll take sway bar and brackets. Interested in hubcaps and mirrors pending price. How much shipped to 75049?

nickv6266 · 05-15-2014, 08:13 PM

I'll take both fenders if they are gm fenders. Can you give me a pic of inside edge of fenders up top. Thanks..

**rockc** · 05-15-2014, 08:20 PM

I would be interested in exhaust heat shield and pipe. shipped to 82210
Thanks
Rock C

**jocko** · 05-15-2014, 08:22 PM

Hi Randy - pending knowing your price, I'd like the NL2 Aux Fuel Tank switch and attached harness. How much would you like for it shipped to 93555?

Vintage Windmills · 05-15-2014, 08:36 PM

Hi Randy,

Interested in hood and front bumper and doors, also rear wheels maybe if Trevor passes. These would fit in the K20

Jud

Karl's Kustoms · 05-15-2014, 08:37 PM

What would you price all automatic linkage parts to include pedal assembly (I am doing a 3 speed to auto swap) and automatic crossmember shipped to 29307? What condition is the A/C in?

UP GRADE · 05-15-2014, 09:02 PM

How much for the Ignition switch, door locks and glove box lock with key(s)?

teeitup · 05-15-2014, 09:09 PM

Ray, it wasn't running. Lift brackets $12, water neck $5, not sure if original carb, I'll get numbers when I get it off $30 for it, oil filler $20, all plus shipping

Already Gone, chrome is worn on the center vent like most, $12 plus shipping to Canada on it. Glove box door is not original for truck, its a 4x4 spid label, $12 plus shipping for it

Trevor, they are the wide 16.5 ones, $40 for pair with tires, or $50 without tires, cost me $5 each to get them dismounted. I'll check out emblems, its missing one I think

Youey, gas pedal, cable and carb bracket $30, visors $20, all plus shipping

mx289, your in line on emblems

bobvilla67, $50 for sway bar setup. Hubcaps $30 for the 3. Mirrors are good, well one has bent arm but I have another good arm $40 for set. All plus shipping

Nick, I'm real sure they original, but they have been painted

RockC, I was going to pm you, it has some rust. I have another one on the other truck too

jocko, I don't think its original switch but I will look

Jud, you can have hood. Front bumper has a hole for a fog light I think, but will check it out. Pass door is good but has speaker hole. Drivers door has some outside corner rust

Karl, $30 for AT linkage, $20 for AT brake pedal, $25 for AT crossmember all plus shipping. The outer AC box is sold already

Thanks Randy

teeitup · 05-15-2014, 09:10 PM

Up Grade, I don't think it has the ign switch in it
Thanks Randy

teeitup · 05-15-2014, 09:11 PM

PS pump/brackets/hoses and PS box sold locally

**71blksuper4x4** · 05-15-2014, 09:16 PM

Randy, I'll take the rear wheels for $50 / no tires. Keep me posted on emblems. Trevor

**bobvilla67** · 05-15-2014, 09:16 PM

Randy, I will take parts. Let me know total shipped. Sorry zip is 75043. Thanks Bobby

UP GRADE · 05-15-2014, 09:31 PM

Randy What about the rest door and glove box lock with key(s)?

**med.bronze** · 05-15-2014, 10:36 PM

Randy- I'd be interested in the metal vacuum advance line if its available. Shipping is to 59044. Thanks-Ryan

**69 MOD** · 05-15-2014, 10:53 PM

If BobVilla backs out on the sway bar I'll take it.
Would you sell the mounting clips for the tailgate trim and the center piece over the handle?
Also looking for tail light trim, I see the pass side is bad but driver looks good maybe?

MOD

Edit: Another thing, is the steel line for the brake booster still there? I would like that too...

05-15-2014, 06:10 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	parting 72 chevy c20 custom camper I'm going to try to start parting this truck this weekend. I have a 72 1/2 I have to go get Sat morning so depending on how long it takes to get camper off it, it may be only Sun parting some. Front fenders are good $60 each, if you want me to ship these figure $100 each for shipping alone outer grill is nice if someone has time to work the bend out of lower part. $50 no ship Doors are pretty good, no ship ASK ALL Questions in thread Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 05-15-2014 at 08:53 PM.

05-15-2014, 06:11 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 72 chevy c20 custom camper 16 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-15-2014, 06:11 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 72 chevy c20 custom camper 21 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-15-2014, 06:12 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 72 chevy c20 custom camper 26 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-15-2014, 07:01 PM	#5
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: parting 72 chevy c20 custom camper Hi Randy, could I get a price on engine lift hooks, water neck Was it running? If So is the carb original ? Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

05-15-2014, 07:02 PM	#6
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: parting 72 chevy c20 custom camper Also oil fill tube. Thanks Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

05-15-2014, 07:20 PM	#7
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,144	Re: parting 72 chevy c20 custom camper If you will sell it seperatly, the A/C centre vent with the rear bracket that holds it in and the glove box door. How much via mail to Canada? __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

05-15-2014, 07:24 PM	#8
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: parting 72 chevy c20 custom camper Randy, how about the back wheels? 16.5 x 8.25? Also, how nice are the Custom Camper emblems? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

05-15-2014, 07:40 PM	#9
Youey Registered User Join Date: Oct 2013 Location: New Jersey Posts: 222	Re: parting 72 chevy c20 custom camper could you give me a price on gas petal assembly and rod to carb, and the visors look good are they, how much ?

05-15-2014, 07:50 PM	#10
mx289 Registered User Join Date: May 2013 Location: wall,nj Posts: 865	Re: parting 72 chevy c20 custom camper In line for the custom camper emblems. __________________ Tom 71 K2500 71 K5 Jimmy

05-15-2014, 07:54 PM	#11
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: parting 72 chevy c20 custom camper Hi Randy. I'll take sway bar and brackets. Interested in hubcaps and mirrors pending price. How much shipped to 75049? __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

05-15-2014, 08:13 PM	#12
nickv6266 Registered User Join Date: May 2008 Location: Arkansas city Kansas Posts: 398	Re: parting 72 chevy c20 custom camper I'll take both fenders if they are gm fenders. Can you give me a pic of inside edge of fenders up top. Thanks..

05-15-2014, 08:20 PM	#13
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 640	Re: parting 72 chevy c20 custom camper I would be interested in exhaust heat shield and pipe. shipped to 82210 Thanks Rock C __________________ 72 chevy 3/4 ton 4X4

05-15-2014, 08:22 PM	#14
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: parting 72 chevy c20 custom camper Hi Randy - pending knowing your price, I'd like the NL2 Aux Fuel Tank switch and attached harness. How much would you like for it shipped to 93555?

05-15-2014, 08:36 PM	#15
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: parting 72 chevy c20 custom camper Hi Randy, Interested in hood and front bumper and doors, also rear wheels maybe if Trevor passes. These would fit in the K20 Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6



Register or Log In To remove these advertisements.

05-15-2014, 08:37 PM	#16
Karl's Kustoms Registered User Join Date: Aug 2013 Location: Spartanburg, SC Posts: 32	Re: parting 72 chevy c20 custom camper What would you price all automatic linkage parts to include pedal assembly (I am doing a 3 speed to auto swap) and automatic crossmember shipped to 29307? What condition is the A/C in?

05-15-2014, 09:02 PM	#17
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: parting 72 chevy c20 custom camper How much for the Ignition switch, door locks and glove box lock with key(s)?

05-15-2014, 09:09 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 72 chevy c20 custom camper Ray, it wasn't running. Lift brackets $12, water neck $5, not sure if original carb, I'll get numbers when I get it off $30 for it, oil filler $20, all plus shipping Already Gone, chrome is worn on the center vent like most, $12 plus shipping to Canada on it. Glove box door is not original for truck, its a 4x4 spid label, $12 plus shipping for it Trevor, they are the wide 16.5 ones, $40 for pair with tires, or $50 without tires, cost me $5 each to get them dismounted. I'll check out emblems, its missing one I think Youey, gas pedal, cable and carb bracket $30, visors $20, all plus shipping mx289, your in line on emblems bobvilla67, $50 for sway bar setup. Hubcaps $30 for the 3. Mirrors are good, well one has bent arm but I have another good arm $40 for set. All plus shipping Nick, I'm real sure they original, but they have been painted RockC, I was going to pm you, it has some rust. I have another one on the other truck too jocko, I don't think its original switch but I will look Jud, you can have hood. Front bumper has a hole for a fog light I think, but will check it out. Pass door is good but has speaker hole. Drivers door has some outside corner rust Karl, $30 for AT linkage, $20 for AT brake pedal, $25 for AT crossmember all plus shipping. The outer AC box is sold already Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-15-2014, 09:10 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 72 chevy c20 custom camper Up Grade, I don't think it has the ign switch in it Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-15-2014, 09:11 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 72 chevy c20 custom camper PS pump/brackets/hoses and PS box sold locally __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-15-2014, 09:16 PM	#21
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: parting 72 chevy c20 custom camper Randy, I'll take the rear wheels for $50 / no tires. Keep me posted on emblems. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

05-15-2014, 09:31 PM	#23
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: parting 72 chevy c20 custom camper Randy What about the rest door and glove box lock with key(s)?

05-15-2014, 10:36 PM	#24
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: parting 72 chevy c20 custom camper Randy- I'd be interested in the metal vacuum advance line if its available. Shipping is to 59044. Thanks-Ryan __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

05-15-2014, 10:53 PM	#25
69 MOD Senior Member Join Date: May 2013 Location: Lino Lakes, MN Posts: 362	Re: parting 72 chevy c20 custom camper If BobVilla backs out on the sway bar I'll take it. Would you sell the mounting clips for the tailgate trim and the center piece over the handle? Also looking for tail light trim, I see the pass side is bad but driver looks good maybe? MOD Edit: Another thing, is the steel line for the brake booster still there? I would like that too... __________________ Chad '71 GMC 2500 Custom Ol Blue '72 Custom Deluxe Highlander Stuffed Olive '73 Trans Am '13 Silverado 2500 Duramax Storm Trooper Last edited by 69 MOD; 05-15-2014 at 11:07 PM.

Register or Log In To remove these advertisements.