F/S : 1972 suburban project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wdz28ss · 08-02-2003, 08:17 PM

Hi to all. My dads cleaning out the pen and I'm really never going to get to this. So here is a chance to get a pretty clean suburban complete body. I do not have a title as I pulled this from a junk yard. This is being sold for parts. All the doors are pretty rust free, but the do have pretty nice dents though. The front and very back seat are there. I sold the middle seat awhile back on here. It has no motor or trans. Has all the 5 lug suspension in the front and a rigged 3/4 ton axle in rear (just to make mobile). I do however have a 5 lug rear axle for it and it's sitting inside the burb. I paid $500 for the burb and sold a seat for i think $100 or $150. make me an offer as I need to get rid of it. If you have any questions email me at wdz28ss@hotmail.com I dont have many pics of the outside, but if there's interest i can run over and take a few pics of whatever you'd like.

I'm in Clinton Utah, just outside of SLC. My Zip is 84015.

Hotrodhenryj · 08-03-2003, 09:29 AM

If you decide to part, I am looking for a third seat, parchment spare tire cover and rear AC vents. Chuck

crazy4chevs · 08-03-2003, 12:25 PM

Pics would help you sell it easier.

wdz28ss · 09-30-2003, 11:52 PM

figured i'd put up some pics since they're workin now.

wdz28ss · 09-30-2003, 11:54 PM

Pass rocker/floor

wdz28ss · 09-30-2003, 11:55 PM

driver rocker/floor

wdz28ss · 10-06-2003, 11:31 PM

Ok, how about parting this out? If enough interest for this calls, I'll sell what i can and scrap the rest....3 doors, rear seat and belts, hatch, gate, glass......All i wanna keep is the front half of frame.//

Hotrodhenryj · 10-06-2003, 11:44 PM

I may be interested in the rear seat if you would be willing to ship. I have one located locally but have been unable to contact the owner. Did it have rear air as I need vents also. Chuck

wdz28ss · 10-06-2003, 11:50 PM

i'd ship it, i broke the 2nd row down and shipped it ups.

wdz28ss · 10-06-2003, 11:51 PM

sorry, no a/c on this bad boy burb though.

Hotrodhenryj · 10-06-2003, 11:58 PM

Could you send me a good pic of it, also price, Thanks kandleclan@rraz.net

wdz28ss · 10-07-2003, 12:08 AM

pic of 3rd row seat

wdz28ss · 10-07-2003, 12:10 AM

pic of gate/hatch

Hardrock2 · 10-07-2003, 03:48 AM

After all the pickin's done, I'd be interested in the stripped carcass (complete tub) for a CC project. If the floors/rockers/ supports are as solid as they look. Any cowl or firewall damage?

Taking any interesting trades?

I better check the miles to SLC. LOL!

Mike

cojnit · 10-07-2003, 06:54 PM

what you want for the back liftgate set up? Also looking for the Seat mounting hardware, spare tire cover, Inner rear fender skin, and that 3rd row seat.

Thanks

wdz28ss · 10-07-2003, 09:52 PM

Quote:

Originally posted by cojnit
what you want for the back liftgate set up? Also looking for the Seat mounting hardware, spare tire cover, Inner rear fender skin, and that 3rd row seat.

Thanks

By liftgate setup, do you mean the gate and the hatch? I was looking for $100 for each piece with the propper hardware for each. Seat mounting hardware is gonna be sold with the seat ($100 for it with hardware.belts) There is no spare cover. rear wheel tubs???? that sounds like alot of work cutting them out. I'd rather just sell the whole tub and let whoever decide on what to do with it ($100 for it). while I'm at it, $100 for all 3 doors with the hardware and related (front panels are gone, but the rear is there)

BTW the tub will have the bad a$$ 3/4 ton axle in the rear to help in moving the beast.

wdz28ss · 10-07-2003, 10:02 PM

Quote:

Originally posted by Hardrock2
After all the pickin's done, I'd be interested in the stripped carcass (complete tub) for a CC project. If the floors/rockers/ supports are as solid as they look. Any cowl or firewall damage?

Taking any interesting trades?

I better check the miles to SLC. LOL!

Mike

Well, let me know..there isnt any damage to the truck in the front., ..I was going to build up a extended cad truck with this, so what you will need is very clean and something worth working with. Trades? i need a set of 22's..

really, i need some cash so that i can buy them though.

Not a very good pic of the firewall, but it's one i had on file.

cojnit · 10-08-2003, 01:02 PM

Actually I ment the pieces of board that attaches to the inside of the fenders. They are the interior skin panels.

Dan72cst · 10-08-2003, 02:23 PM

Could you post or send me pictures of all three doors

Dan72cst@hotmail.com

burb71 · 10-08-2003, 05:16 PM

I need GOOD CRACK FREE Blue Interior Parts.
Can you tell me if you have it in this condition and give price?
DASH PAD, STEERING WHEEL, FRONT & REAR ARM RESTS, REAR INTERIOR CARGO PANELS, 3rd & (4th) DOOR PANELS.
Also if no one else takes it the 3rd door it self. Is it solid rust & free. Please send pics of all

ratrod67 · 10-08-2003, 05:32 PM

I wish you were closer. Wanna deliver to Texas?

wdz28ss · 10-08-2003, 08:05 PM

There really isn't any good interior parts except for the seat.

Posting a pic of driver door

wdz28ss · 10-08-2003, 08:06 PM

pic of pass door and 3rd door. 3rd door is hurt, but pass front is good.

wdz28ss · 10-11-2003, 10:35 PM

Lowering all prices to $75.....

kilomanjaro · 10-11-2003, 11:36 PM

if you haven't already started parting it , I am interested in buying it complete. I sent you an email.
john
kilomanjaro63@hotmail.com

08-02-2003, 08:17 PM	#1
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	F/S : 1972 suburban project Hi to all. My dads cleaning out the pen and I'm really never going to get to this. So here is a chance to get a pretty clean suburban complete body. I do not have a title as I pulled this from a junk yard. This is being sold for parts. All the doors are pretty rust free, but the do have pretty nice dents though. The front and very back seat are there. I sold the middle seat awhile back on here. It has no motor or trans. Has all the 5 lug suspension in the front and a rigged 3/4 ton axle in rear (just to make mobile). I do however have a 5 lug rear axle for it and it's sitting inside the burb. I paid $500 for the burb and sold a seat for i think $100 or $150. make me an offer as I need to get rid of it. If you have any questions email me at wdz28ss@hotmail.com I dont have many pics of the outside, but if there's interest i can run over and take a few pics of whatever you'd like. I'm in Clinton Utah, just outside of SLC. My Zip is 84015. __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

08-03-2003, 09:29 AM	#2
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	If you decide to part, I am looking for a third seat, parchment spare tire cover and rear AC vents. Chuck __________________ Arizona rust free sheetmetal

08-03-2003, 12:25 PM	#3
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	Pics would help you sell it easier. __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

09-30-2003, 11:52 PM	#4
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	figured i'd put up some pics since they're workin now. Attached Images __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

09-30-2003, 11:54 PM	#5
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	Pass rocker/floor Attached Images __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

09-30-2003, 11:55 PM	#6
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	driver rocker/floor Attached Images __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

10-06-2003, 11:31 PM	#7
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	Ok, how about parting this out? If enough interest for this calls, I'll sell what i can and scrap the rest....3 doors, rear seat and belts, hatch, gate, glass......All i wanna keep is the front half of frame.// __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

10-06-2003, 11:44 PM	#8
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	I may be interested in the rear seat if you would be willing to ship. I have one located locally but have been unable to contact the owner. Did it have rear air as I need vents also. Chuck __________________ Arizona rust free sheetmetal

10-06-2003, 11:50 PM	#9
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	i'd ship it, i broke the 2nd row down and shipped it ups. __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

10-06-2003, 11:51 PM	#10
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	sorry, no a/c on this bad boy burb though. __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

10-06-2003, 11:58 PM	#11
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Could you send me a good pic of it, also price, Thanks kandleclan@rraz.net __________________ Arizona rust free sheetmetal

10-07-2003, 12:08 AM	#12
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	pic of 3rd row seat Attached Images __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

10-07-2003, 12:10 AM	#13
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	pic of gate/hatch Attached Images __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

10-07-2003, 03:48 AM	#14
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	After all the pickin's done, I'd be interested in the stripped carcass (complete tub) for a CC project. If the floors/rockers/ supports are as solid as they look. Any cowl or firewall damage? Taking any interesting trades? I better check the miles to SLC. LOL! Mike __________________ hardrock2

10-07-2003, 06:54 PM	#15
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	what you want for the back liftgate set up? Also looking for the Seat mounting hardware, spare tire cover, Inner rear fender skin, and that 3rd row seat. Thanks __________________ Got "the Midas Touch!"



Register or Log In To remove these advertisements.

10-08-2003, 01:02 PM	#18
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	Actually I ment the pieces of board that attaches to the inside of the fenders. They are the interior skin panels. __________________ Got "the Midas Touch!"

10-08-2003, 02:23 PM	#19
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	Could you post or send me pictures of all three doors Dan72cst@hotmail.com __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

10-08-2003, 05:16 PM	#20
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Burb parts I need GOOD CRACK FREE Blue Interior Parts. Can you tell me if you have it in this condition and give price? DASH PAD, STEERING WHEEL, FRONT & REAR ARM RESTS, REAR INTERIOR CARGO PANELS, 3rd & (4th) DOOR PANELS. Also if no one else takes it the 3rd door it self. Is it solid rust & free. Please send pics of all

10-08-2003, 05:32 PM	#21
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	I wish you were closer. Wanna deliver to Texas?

10-08-2003, 08:05 PM	#22
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	There really isn't any good interior parts except for the seat. Posting a pic of driver door Attached Images __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

10-08-2003, 08:06 PM	#23
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	pic of pass door and 3rd door. 3rd door is hurt, but pass front is good. Attached Images __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

10-11-2003, 10:35 PM	#24
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	Lowering all prices to $75..... __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

10-11-2003, 11:36 PM	#25
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	burb if you haven't already started parting it , I am interested in buying it complete. I sent you an email. john kilomanjaro63@hotmail.com __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

Register or Log In To remove these advertisements.