TX Mopar Electric fan mod assembled in shroud

[Jb70c10]

For sale I have a jeep Cherokee electric fan set up like this:
http://67-72chevytrucks.com/vboard/s...d.php?t=254617
Best of all it is Already installed in an OEM chevy shroud with a painless relay harness.

I purchased all the items BRAnD NEW (except shroud) no salvage yard parts! I hooked it all up to test it out once but it has never been used in the vehicle except for my test run. Let the truck idle for about 20-30 min and the fan cycled like it should and temp never got over 200 deg. Shroud is broke around top right bolt hole but will still bolt down

Was gonna run this on my truck after restoration but decided to keep the stock set up instead to cut down on extra wiring. Over $250 invested, will sell for $145 plus shipping. Can send pics via email or text and will try to post some here later.

Here's a link to the relay harness
http://www.summitracing.com/search?S...d=PRF-30115%20

[Jb70c10]

Price is negotiable, shoot me a reasonable offer. Fan purchased new from dodge dealership, harness came from summit. Everything you need is here. Ready to bolt on and go!

[Jb70c10]

Deal pending

[tonkatrux2]

Wondering if you got my message about size I would like that I wanted to be first on list

[74baggedbug]

Location?

[tonkatrux2]

Mounting hole spacing

[Jb70c10]

I had a local deal pending but want to be fair about this so I am going to put that deal on hold for now.

Tonka I did not get a message, sorry. Spacing is 28 3/8 between top holes, 18 1/4" between between bottom holes and 18 7/8 between top and bottom holes. When did you send the message? If you were first to reply then you have first shot. Get back to me. Be sure to post something here in the thread when you send messages, etc.....

74bagged, I'm located near Belton, TX

Give me some time to get this all figured out. I'm having some trouble getting my current set up to fit a stock shroud http://67-72chevytrucks.com/vboard/s...d.php?t=632255 so I may hold off on selling until I get it worked out in case I have to end up using this on my truck. Everyone hold tight please!!!!!

[Jb70c10]

Probably going to go with the stock fan clutch set up, think I've got it figured out but need to be sure before I commit to selling the electric set up. Will know for sure this coming week sometime after the parts I ordered arrive. Just wanted to give everyone a heads up. If you are still interested I will go in the order I posted previously. Be sure to post an "ill take it" or something on here if you want it! Thanks everyone

[boynton]

I would be interested in this and would pick up locally if it gets to me. I would like to look at it before you ship it out if it goes to someone else. I really like the idea.