63 C10 with a 93 k1500 donor

[J Williams]

So my question to all you fab masters out there. I have a 63 C10 that I have slowly been working on. My senior year in high school I pulled the straight six 292 and built a 350 and dropped it in. I now want to put a 5 speed in it. I have a 93 1/2 ton with the NV3500 and all the clutch components but I have to drive two hours to get the parts. So my question is; Is this a hard swap, I know I have to change to the hydraulic clutch and I just want to know if everything off the 93 will work or if I will have to fab other parts.

I was also wondering if the front disk brake setup would work on my truck. I don't care if I have to change rims due to a different bolt pattern. Any info would be great. This is a 2wd C10 and will be my daily driver when completed. Thanks in advance.

[Captainfab]

I posted a reply in your duplicate thread in the 'Engine and Drivetrain' section