WV 1974 c10 SWB Stepside

[AspecialZ]

So I've been toying with this for a few months and finally came to a decision, not one I'm proud of, but its time to pass it along for personal reasons as I did my 50 GMC and 50 Fleetline. So...here's my 74 c10 project. It has a clean WV title and vin tag. However, it is again in pieces. I bought it in Georgia in 2003, Fixed the cab (still needs some work) Bought NOS Doors, Fenders, Rad Support, Filler Pan, Grill, (billet insert) NOS Headlamp trim, NOS Grill Surround, Custom chrome bumper with fog lights, wire brushed and painted the frame, all new suspension (upper and lower arms, shocks, spring (McGauheys' 4.5/6" lowering kit) Even have a complete custom bed from Mar-k, and the wood kit and reverse stainless strips and hardware for it. Rod doors complete interior, one piece windows, set of Boyd Coddington wheels and tires 18/20 combo, even new brakes and calipers installed front and rear (drums rebuilt) Any questions please ask through PM or text 304 670 0361. I work daylight and usually have evenings or weekends free. Here is a list of what I can think of now. Wellsburg, WV is where I'm located.

1.Cab w/ NOS doors $800. Some surface rust (new rocker on left side, underside completed with cab mount bushings

2.Mar-k swb bed complete (without stake pockets and smooth front pan and tailgate, all stainless hardware, wood for bed, strips, cross-sills $1500

3. NOS Fenders, primed and undercoated insides $400

4. NOS Stepside steps and brackets $200

5. Used southern Stepside Fenders $350

6. One Piece Windows Conversion Kit $650

7. NOS Headlight Bezels $350

8. Rad Support $100

9. Complete EZ Wire wiring harness (18 Circuit I believe for A/C power Acc.) $135

10. Billet Grill $65

11. Chrome Hood Hinges, need polished, but good shape $75

12. SWB Frame, complete rolling chassis $600

13. 383 small block, tons of billet (no carb or dist) with 350 trans $2500

14. Stock side windows and vent glass $50

15. 18/20 Billet Boyd Coddington custom Smoothie 2 rims and tires, brand new $1500

16. Hidden Hitch for Stepside with Custom Mar-k Rollpan for flip down setup. never used $200 (or will deal with sale of stepside bed)

17. Complete Rod Doors interior kit, including, door panels, kick panels with speaker pods, rear cab, ceiling, 3 piece rear behind seat. All still new in the boxes. $800

18. Goodmark steel cowl hood, new, few small dents in front $400

19. Complete rubber set for cab including windshield $80

20. Complete dual exhaust with Flowmaster 40 series mufflers and headers $200

....I know their is more than this. I have extra fenders, a pair of shaved doors, trim, wiring...lots of parts for the interior. I would welcome someone to make an offer and buy it all 1st. You will get everything I have with it. thank you!

[AspecialZ]

5gs takes all but motor.

[AspecialZ]

Bump

[ScottH]

Is the wiring kit NIB or has it been installed?

[76on44s]

im interested in the doors if you part

[AspecialZ]

Wiring kit is new, but recently mounted to underneath dash. Wires to motor have been run and column.

[AspecialZ]

BUMP for offers.

[Indycar1]

Too bad your so far away, I need a swb frame for my project. Good luck with sale

[old Rusty C10]

Im PMing you

[AspecialZ]

Originally Posted by old Rusty C10

Im PMing you

replied!

[AspecialZ]

Originally Posted by Indycar1

Too bad your so far away, I need a swb frame for my project. Good luck with sale

Im 4.5hrs from Indy...that's not far!

[rip2174]

Have any pictures of the interior? Are the shaved handled doors stock or aftermarket and how much?

[old Rusty C10]

as per the PM I will take the cab.. let me know how you want to be paid and when I can get it after wednesday

[AspecialZ]

what interior, the rod doors kit?? doors are stock gm doors that have been shaved. lets say 200 for the pair?

[rip2174]

yes the Rod Door kit.

[AspecialZ]

Originally Posted by rip2174

yes the Rod Door kit.

It's still in the boxes. I can open them up and get some pictures. Off the top of my head it's the panels, arm rests, lower kick panels speaker pods. Rear corner pieces, rear back panel and headliner. Think I didn't miss anything.

[Speeding Dakota]

Interested in your wiring kit. Is it the complete kit from front to back? Is it a universal kit or stock style with the plugs? How much?
Thanks

[AspecialZ]

Complete kit front to back. Headlight harness is installed. Motor wires are setup for SBC. No rear light setup yet. EZ wire circuit kit with AC and power accessories. I believe 21 circuit. $120 I guess