2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ksbrktracer · 06-22-2014, 12:55 AM

I have 2 sets of Boss 338's in Gray and Machine Finish, 20X8.5 5.25 BS and 20X10 5.50 BS. Very hard to get right now as everything is on backorder.

These are in The Building and ready to ship right now .... NO WAITING ... !

$750.00 + shipping for a set and will include the correct lugnuts.

**thelonerife** · 06-22-2014, 02:30 AM

Tommy, I have 2 20x10s with 6 1/4'' back spacing on the rear of my truck, and Im using a 1'' spacer. I'd like to get the ones that have 5 or 5.5 back spacing so I can lose the spacer and have more polished lip.

How much would two gray 20x10 w/5.5 bs shipped to 37043 cost?

ksbrktracer · 06-22-2014, 03:44 AM

Quote:

Originally Posted by thelonerife

Tommy, I have 2 20x10s with 6 1/4'' back spacing on the rear of my truck, and Im using a 1'' spacer. I'd like to get the ones that have 5 or 5.5 back spacing so I can lose the spacer and have more polished lip.

How much would two gray 20x10 w/5.5 bs shipped to 37043 cost?

I would do $390.00 + $50.00 shipping. Make sure you have the O-Ring style caps so they match tho.

**thelonerife** · 06-22-2014, 02:50 PM

Quote:

Originally Posted by ksbrktracer

I would do $390.00 + $50.00 shipping. Make sure you have the O-Ring style caps so they match tho.

Ok I have the caps w/the tabs on them. I can take a pic if I need to. My polished lip is like 2 5/8'' Can you tell me how much more the ones you have have?

Blue97 · 06-22-2014, 03:23 PM

Set of 20x8.5-10's shipped to 86426

thanks.

ksbrktracer · 06-22-2014, 10:16 PM

Quote:

Originally Posted by thelonerife

Ok I have the caps w/the tabs on them. I can take a pic if I need to. My polished lip is like 2 5/8'' Can you tell me how much more the ones you have have?

the 5.50 Bs wheel is going to have basically the same front side. They use the pad to change backspace. also you have version 1 0r 2 wheels which will be different than mine. The ones I have, have a different center cap, the cap is shaped different, bigger and is held on by an O-ring. Do your front wheel have tabs or O-rings holdng the caps on .... ?

Quote:

Originally Posted by Blue97

Set of 20x8.5-10's shipped to 86426

thanks.

Shipping would be $131.25 to that zip code, total would be $881.25 , minus the deposit.

**thelonerife** · 06-23-2014, 01:40 AM

[QUOTE=ksbrktracer;6731911]the 5.50 Bs wheel is going to have basically the same front side. They use the pad to change backspace. also you have version 1 0r 2 wheels which will be different than mine. The ones I have, have a different center cap, the cap is shaped different, bigger and is held on by an O-ring. Do your front wheel have tabs or O-rings holdng the caps on .... ?

Oh. I have the tabs on the front too. I have machined down rotors. If I won't gain any polished lip then I may just leave well enough alone. Sorry for the trouble. Thanks tho.

Blue97 · 06-23-2014, 06:29 PM

Bummer on the 10"

ksbrktracer · 07-01-2014, 12:07 AM

Still available ..... ! Perfect backspace for a lowered fleetside truck with wider 71-72 style rearend or 73 and up

72tutone · 07-01-2014, 10:02 AM

pm sent

ksbrktracer · 07-01-2014, 10:47 AM

Quote:

Originally Posted by 72tutone

pm sent

PM Replied

c10timmy · 07-05-2014, 01:35 PM

I have an 81 step side. It is bagged. What is the best offset for the 20x10 338s? Do you have them available in gray?

ksbrktracer · 07-08-2014, 08:23 AM

Quote:

Originally Posted by c10timmy

I have an 81 step side. It is bagged. What is the best offset for the 20x10 338s? Do you have them available in gray?

PM sent

XtremeBowtie · 09-08-2014, 10:48 PM

You still have set of 20 x 8.5 and 20 x 10"

Plan on them going on my 86 C10

Thanks

BIGJOEGS · 12-06-2015, 01:29 PM

ksbrktracer I tried to pm but your in box is full.
Do you have 2 grey Boss 338 20x10 5.5 offset wheels in stock and if so can you get me a cost shipped to 94538?

Thanks Joe

**SoCoC10** · 02-28-2016, 12:29 AM

Quote:

Originally Posted by ksbrktracer

I have 2 sets of Boss 338's in Gray and Machine Finish, 20X8.5 5.25 BS and 20X10 5.50 BS. Very hard to get right now as everything is on backorder.

These are in The Building and ready to ship right now .... NO WAITING ... !

$750.00 + shipping for a set and will include the correct lugnuts.

Can I get a total price on a set of these shipped to 80921?
Thanks
Troy

kpc01 · 03-10-2016, 04:05 PM

I'd also like to get a price shipped to TX 75068. 20x10 and 20x8.5s in grey

06-22-2014, 12:55 AM	#1
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship I have 2 sets of Boss 338's in Gray and Machine Finish, 20X8.5 5.25 BS and 20X10 5.50 BS. Very hard to get right now as everything is on backorder. These are in The Building and ready to ship right now .... NO WAITING ... ! $750.00 + shipping for a set and will include the correct lugnuts. Attached Images

06-22-2014, 02:30 AM	#2
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship Tommy, I have 2 20x10s with 6 1/4'' back spacing on the rear of my truck, and Im using a 1'' spacer. I'd like to get the ones that have 5 or 5.5 back spacing so I can lose the spacer and have more polished lip. How much would two gray 20x10 w/5.5 bs shipped to 37043 cost? Attached Images __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

06-22-2014, 03:23 PM	#5
Blue97 Registered User Join Date: Aug 2012 Location: Fort Mohave/BHC AZ Posts: 349	Re: 2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship Set of 20x8.5-10's shipped to 86426 thanks.

06-23-2014, 01:40 AM	#7
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship [QUOTE=ksbrktracer;6731911]the 5.50 Bs wheel is going to have basically the same front side. They use the pad to change backspace. also you have version 1 0r 2 wheels which will be different than mine. The ones I have, have a different center cap, the cap is shaped different, bigger and is held on by an O-ring. Do your front wheel have tabs or O-rings holdng the caps on .... ? Oh. I have the tabs on the front too. I have machined down rotors. If I won't gain any polished lip then I may just leave well enough alone. Sorry for the trouble. Thanks tho. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

06-23-2014, 06:29 PM	#8
Blue97 Registered User Join Date: Aug 2012 Location: Fort Mohave/BHC AZ Posts: 349	Re: 2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship Bummer on the 10"

07-01-2014, 12:07 AM	#9
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: 2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship Still available ..... ! Perfect backspace for a lowered fleetside truck with wider 71-72 style rearend or 73 and up

07-01-2014, 10:02 AM	#10
72tutone Registered User Join Date: May 2010 Location: St.Louis Posts: 644	Re: 2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship pm sent

07-05-2014, 01:35 PM	#12
c10timmy Registered User Join Date: Jul 2012 Location: Hohenwald, TN Posts: 8	Re: 2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship I have an 81 step side. It is bagged. What is the best offset for the 20x10 338s? Do you have them available in gray?

09-08-2014, 10:48 PM	#14
XtremeBowtie Registered User Join Date: Dec 2008 Location: Western, NC Posts: 193	Re: 2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship You still have set of 20 x 8.5 and 20 x 10" Plan on them going on my 86 C10 Thanks __________________ First and Foremost: Thank you God for my Salvation! I pray that others will seek your Son, Jesus Christ! https://instagram.com/xtremebowtie My 63 Double Dropmember Build "Project Sub-Zero": http://67-72chevytrucks.com/vboard/s...42#post5050342 My 2013 Camaro 1LE: https://www.youtube.com/channel/UCxa...wL5d6RnmfdJa1A 86 C10 "Build Thread”: http://67-72chevytrucks.com/vboard/s...d.php?t=668777

12-06-2015, 01:29 PM	#15
BIGJOEGS Registered User Join Date: Mar 2015 Location: Morgan Hill California Posts: 4	Re: 2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship ksbrktracer I tried to pm but your in box is full. Do you have 2 grey Boss 338 20x10 5.5 offset wheels in stock and if so can you get me a cost shipped to 94538? Thanks Joe

03-10-2016, 04:05 PM	#17
kpc01 Registered User Join Date: Aug 2011 Location: DFW TX (Oak Point) Posts: 148	Re: 2 sets of BOSS 338 in Gray and Machine in Stock and ready to ship I'd also like to get a price shipped to TX 75068. 20x10 and 20x8.5s in grey



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.