WV Hedman BBC Long Tube Headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeh · 06-22-2014, 09:37 PM

I have a set of Hedman HTC part# 69136 headers for sale. They were on the truck for about 1 hour of run time. Should work fine with factory big block mounts. I wouldn't recommend these if you are running a very low truck, that's the reason I took them off. They have a few scuffs on them from putting them on and taking them off by myself... They also have 2" primary tubes. Cost new was $494 asking $300 OBO, rather not ship but if so it will be price plus shipping. Thanks, Jason

jeh · 06-23-2014, 10:01 PM

Ttt

CST10 · 06-25-2014, 09:14 PM

How much is the shipping to 70737 area code? I'm interested.

jeh · 06-25-2014, 09:28 PM

Quote:

Originally Posted by CST10

How much is the shipping to 70737 area code? I'm interested.

I'm out of state at work right now, so it would be Friday of next week before I can get a quote at the UPS store if that's ok. I need to find a box for them also.

CST10 · 06-25-2014, 09:59 PM

Yes that's fine. Let me know how much shipping would be and then we can discuss further. Thanks.

jeh · 06-26-2014, 06:45 PM

Quote:

Originally Posted by CST10

Yes that's fine. Let me know how much shipping would be and then we can discuss further. Thanks.

Ok, will do

jeh · 07-02-2014, 09:10 PM

Quote:

Originally Posted by CST10

Yes that's fine. Let me know how much shipping would be and then we can discuss further. Thanks.

I'm going to try to find a box tomorrow and get you a quote on shipping. Thanks, Jason

jeh · 07-06-2014, 10:20 PM

Ttt

CST10 · 07-08-2014, 08:47 PM

Ever get a quote on shipping?

jeh · 07-08-2014, 09:05 PM

I got a quote yesterday with an "estimated" box size because I didn't find a box yet. It was $32. That will be close because I just paid $27 to ship my Sanderson headers to Nashville TN.

CST10 · 07-09-2014, 06:18 PM

I'm have to pass. After I looked up the part number I found out the primary tube size is too large for my application. I need 1 3/4" primary tubes. Sorry.

You do have them priced right. 1/2 price is a good deal for someone.

jeh · 07-09-2014, 06:33 PM

Quote:

Originally Posted by CST10

I'm have to pass. After I looked up the part number I found out the primary tube size is too large for my application. I need 1 3/4" primary tubes. Sorry.

You do have them priced right. 1/2 price is a good deal for someone.

No problem, just out of curiosity, what heads do you have where you need 1 3/4" tubes?

CST10 · 07-10-2014, 09:56 PM

It's a low compression 454. Heads are 049 oem. Small cam. If the primary's are too large it moves the torque up the rpm range. I'm trying to build low rpm torque.

jeh · 07-10-2014, 10:42 PM

10-4, just curious

jeh · 07-16-2014, 07:48 PM

Ttt

jeh · 07-20-2014, 11:38 PM

Ttt

Littletony · 07-21-2014, 07:28 AM

Pm sent

jeh · 07-21-2014, 10:59 AM

Quote:

Originally Posted by Littletony

Pm sent

Pics sent

jeh · 07-25-2014, 09:43 PM

Ttt, Offers???

jeh · 07-27-2014, 09:41 PM

Bump

carbuff382 · 07-27-2014, 11:30 PM

Quote:

Originally Posted by jeh

Bump

Just curious, how low was your truck? My truck has a total of 3 1/2 drop up front, 5 inch drop in rear ,I think. Also shipping to 87111?
Thanks,Marc

Critterman71 · 07-28-2014, 07:15 AM

Shipping to 48872? thanks

jeh · 07-28-2014, 07:42 PM

Quote:

Originally Posted by carbuff382

Just curious, how low was your truck? My truck has a total of 3 1/2 drop up front, 5 inch drop in rear ,I think. Also shipping to 87111?
Thanks,Marc

Mine is dropped 4/6, my driveway was my main issue. I'll check shipping when I get back home from work on Thursday.

jeh · 07-28-2014, 07:43 PM

Quote:

Originally Posted by Critterman71

Shipping to 48872? thanks

Same as above, I'll check on Thursday when I get back home from work. Thanks

1963c-10 · 07-29-2014, 10:12 AM

Are these still for sale? Im interested and have $$$

06-22-2014, 09:37 PM	#1
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Hedman BBC Long Tube Headers I have a set of Hedman HTC part# 69136 headers for sale. They were on the truck for about 1 hour of run time. Should work fine with factory big block mounts. I wouldn't recommend these if you are running a very low truck, that's the reason I took them off. They have a few scuffs on them from putting them on and taking them off by myself... They also have 2" primary tubes. Cost new was $494 asking $300 OBO, rather not ship but if so it will be price plus shipping. Thanks, Jason Attached Images __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

06-23-2014, 10:01 PM	#2
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Hedman BBC Long Tube Headers Ttt __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

06-25-2014, 09:14 PM	#3
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: Hedman BBC Long Tube Headers How much is the shipping to 70737 area code? I'm interested. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

06-25-2014, 09:59 PM	#5
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: Hedman BBC Long Tube Headers Yes that's fine. Let me know how much shipping would be and then we can discuss further. Thanks. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

07-06-2014, 10:20 PM	#8
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Hedman BBC Long Tube Headers Ttt __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

07-08-2014, 08:47 PM	#9
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: Hedman BBC Long Tube Headers Ever get a quote on shipping? __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

07-08-2014, 09:05 PM	#10
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Hedman BBC Long Tube Headers I got a quote yesterday with an "estimated" box size because I didn't find a box yet. It was $32. That will be close because I just paid $27 to ship my Sanderson headers to Nashville TN. __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

07-09-2014, 06:18 PM	#11
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: Hedman BBC Long Tube Headers I'm have to pass. After I looked up the part number I found out the primary tube size is too large for my application. I need 1 3/4" primary tubes. Sorry. You do have them priced right. 1/2 price is a good deal for someone. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

07-10-2014, 09:56 PM	#13
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: Hedman BBC Long Tube Headers It's a low compression 454. Heads are 049 oem. Small cam. If the primary's are too large it moves the torque up the rpm range. I'm trying to build low rpm torque. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

07-10-2014, 10:42 PM	#14
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Hedman BBC Long Tube Headers 10-4, just curious __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

07-16-2014, 07:48 PM	#15
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Hedman BBC Long Tube Headers Ttt __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

07-20-2014, 11:38 PM	#16
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Hedman BBC Long Tube Headers Ttt __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

07-21-2014, 07:28 AM	#17
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Hedman BBC Long Tube Headers Pm sent __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

07-25-2014, 09:43 PM	#19
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Hedman BBC Long Tube Headers Ttt, Offers??? __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

07-27-2014, 09:41 PM	#20
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Hedman BBC Long Tube Headers Bump __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623



Register or Log In To remove these advertisements.

07-28-2014, 07:15 AM	#22
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Hedman BBC Long Tube Headers Shipping to 48872? thanks

07-29-2014, 10:12 AM	#25
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Hedman BBC Long Tube Headers Are these still for sale? Im interested and have $$$ __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer Last edited by 1963c-10; 07-29-2014 at 02:14 PM.

Register or Log In To remove these advertisements.