AZ AVS Digital Gauge Panel w/ Senders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pro Performance · 07-30-2014, 10:32 AM

I will no longer be needed my AVS digital gauge panel. The main plate has never been mounted, and only sending units threaded in. It comes with different color face plates. Below is the description from their site.

Retail: $300
Asking $240 Shipped

FEATURES:

DIGITAL DISPLAY WITH 5 READOUTS FOR 4 CORNERS + TANK (Up to 230-PSI)
CHROME, BRUSHED ALUMINUM, and BLACK TRIM PLATE (yes, all 3 of these plates are included in the kit)
L.E.D. BACKLIT DISPLAY WITH 7 DIFFERENT COLORS (press the button to set the color that you desire)
BUTTONS FOR WARNING PRESSURE SETTINGS ARE HIDDEN UNDER THE UNIT FOR A CLEANER LOOK AND ALSO TO PREVENT TAMPERING OF SETTINGS
230 PSI SYSTEM (our senders are smaller than OTHERS and they are anodized aluminum for an added touch. +/-5 PSI tolerance.)
SENSOR HARNESSES, FIVE 20' HARNESSES (these plug into the sensors and supply both a power and ground as well as the feedback wire. This allows the installer to route all wiring back to the dash eliminating the chance of bad connections and loose grounds like other gauges).
UPDATED FEATURES:
100% WATERTPROOF SENSORS
100% WATERPROOF WIRE HARNESSES/PLUGS
PLUG AND PLAY MAIN HARNESS. ONLY 2 WIRES TO HOOK UP, (+12V & -12V). ALL OF THE INCLUDED SENSOR CORDS PLUG RIGHT INTO THE HARNESS.
EXTERNAL PUSH BUTTON TO CHANGE THE DISPLAY COLOR ANYTIME THAT YOU WANT. THE INCLUDED PUSH BUTTON ALSO PLUGS RIGHT INTO THE MAIN HARNESS.
EXTRA BILLET FACES COME WITH THE THREADED BOLTS ALREADY INSTALLED. TO PUT ON A NEW FACE, SIMPLY REMOVE THE FOUR NUTS ON THE BACK OF THE UNIT AND REMOVE THE METAL CASING. PICK UP THE INTERNAL CIRCUIT BOARDS AND PLACE OVER THE BOLTS OF THE NEW PLATE. REINSTALL THE FOUR NUTS AND U R DONE!!!
ALL 5 OF THE SENSOR CORDS ARE NOW 20' LONG. NO MORE 15' FOOTERS!
INSTALLATION MEASUREMENTS:
CUT OUT REQUIRED = 3.35" WIDE X 2.15" TALL (86mm X 55mm)
MOUNTING DEPTH = 1.30" (33mm)
TRIM PLATE MEASUREMENTS: 3.60" WIDE X 2.34" TALL X .20" THICK (91mm X 60mm X 5mm)

**70cst** · 07-31-2014, 12:29 AM

Bump

**nlped** · 07-31-2014, 08:18 AM

PM sent

**nlped** · 07-31-2014, 12:02 PM

Payment sent

Thanks,

Pro Performance · 07-31-2014, 12:12 PM

Sold... thanks Ed.

**nlped** · 08-20-2014, 06:09 PM

Got it Travis! Thanks a ton!!!

07-30-2014, 10:32 AM	#1
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	AVS Digital Gauge Panel w/ Senders I will no longer be needed my AVS digital gauge panel. The main plate has never been mounted, and only sending units threaded in. It comes with different color face plates. Below is the description from their site. Retail: $300 Asking $240 Shipped FEATURES: DIGITAL DISPLAY WITH 5 READOUTS FOR 4 CORNERS + TANK (Up to 230-PSI) CHROME, BRUSHED ALUMINUM, and BLACK TRIM PLATE (yes, all 3 of these plates are included in the kit) L.E.D. BACKLIT DISPLAY WITH 7 DIFFERENT COLORS (press the button to set the color that you desire) BUTTONS FOR WARNING PRESSURE SETTINGS ARE HIDDEN UNDER THE UNIT FOR A CLEANER LOOK AND ALSO TO PREVENT TAMPERING OF SETTINGS 230 PSI SYSTEM (our senders are smaller than OTHERS and they are anodized aluminum for an added touch. +/-5 PSI tolerance.) SENSOR HARNESSES, FIVE 20' HARNESSES (these plug into the sensors and supply both a power and ground as well as the feedback wire. This allows the installer to route all wiring back to the dash eliminating the chance of bad connections and loose grounds like other gauges). UPDATED FEATURES: 100% WATERTPROOF SENSORS 100% WATERPROOF WIRE HARNESSES/PLUGS PLUG AND PLAY MAIN HARNESS. ONLY 2 WIRES TO HOOK UP, (+12V & -12V). ALL OF THE INCLUDED SENSOR CORDS PLUG RIGHT INTO THE HARNESS. EXTERNAL PUSH BUTTON TO CHANGE THE DISPLAY COLOR ANYTIME THAT YOU WANT. THE INCLUDED PUSH BUTTON ALSO PLUGS RIGHT INTO THE MAIN HARNESS. EXTRA BILLET FACES COME WITH THE THREADED BOLTS ALREADY INSTALLED. TO PUT ON A NEW FACE, SIMPLY REMOVE THE FOUR NUTS ON THE BACK OF THE UNIT AND REMOVE THE METAL CASING. PICK UP THE INTERNAL CIRCUIT BOARDS AND PLACE OVER THE BOLTS OF THE NEW PLATE. REINSTALL THE FOUR NUTS AND U R DONE!!! ALL 5 OF THE SENSOR CORDS ARE NOW 20' LONG. NO MORE 15' FOOTERS! INSTALLATION MEASUREMENTS: CUT OUT REQUIRED = 3.35" WIDE X 2.15" TALL (86mm X 55mm) MOUNTING DEPTH = 1.30" (33mm) TRIM PLATE MEASUREMENTS: 3.60" WIDE X 2.34" TALL X .20" THICK (91mm X 60mm X 5mm) Attached Images

07-31-2014, 12:29 AM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: AVS Digital Gauge Panel w/ Senders Bump __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

07-31-2014, 08:18 AM	#3
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: AVS Digital Gauge Panel w/ Senders PM sent __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-31-2014, 12:02 PM	#4
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: AVS Digital Gauge Panel w/ Senders Payment sent Thanks, __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-31-2014, 12:12 PM	#5
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: AVS Digital Gauge Panel w/ Senders Sold... thanks Ed.

08-20-2014, 06:09 PM	#6
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: AVS Digital Gauge Panel w/ Senders Got it Travis! Thanks a ton!!! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.