Intercooler - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rgreathouse** · 08-04-2014, 03:27 PM

Anyone have any detailed pictures of 67-72 Intercooler set ups? I've thought about running air to water, I have a second gen cummins I was going to cut 2" off of and notch grille support. Just looking for ideas! Thanks

ryanroo · 08-04-2014, 09:13 PM

my solution

uses the second gen radiator and intercooler. mounts in the same fashion as OEM. no mods necessary for off the shelf replacement. very little clearancing on the hood latch to bolt in as original. may require more mods for a condenser or anything else in front.

**rgreathouse** · 08-04-2014, 09:18 PM

Thanks for the pictures Ryanroo, i just went through you entire build and love it! Since i have a second gen intercooler and access to a radiator core i think I may get another core support and try something similar. Looks great! Did you keep the center grille support?

ryanroo · 08-04-2014, 10:58 PM

Quote:

Originally Posted by rgreathouse

Thanks for the pictures Ryanroo, i just went through you entire build and love it! Since i have a second gen intercooler and access to a radiator core i think I may get another core support and try something similar. Looks great! Did you keep the center grille support?

No problem.

the center support either fit just fine, or requires a touch of trimming. that will be the thing that limits what goes in front of the I/C. with some sensible mods i think it will be just fine with a condenser and i will run any other coolers i need to off to sides. it has been a while since it was together enough for me to remember. i dont have my condenser yet so i haven't ruined the latch and center support yet...

Dewey72 · 08-05-2014, 04:14 PM

Cut 2 rows off of mine and trimmed the tanks to mach.
Name: cab off 003.jpg
Views: 880
Size: 54.4 KB

Name: cab off 022.jpg
Views: 1312
Size: 56.9 KB

Name: cab off 023.jpg
Views: 1031
Size: 62.8 KB

Name: cab off 027.jpg
Views: 914
Size: 66.1 KB

**rgreathouse** · 08-05-2014, 04:40 PM

Thanks for the pics dewey, looks like you kept the stock radiator? 3 core?

Dewey72 · 08-05-2014, 05:49 PM

Ya got the stock radiator 3 core. Got a buddy running a 6bt in a early ramcharger with no fans and no problems. Can drop a aluminum 3 core in it fi it is but don't think it will be.

joel.e · 08-18-2014, 07:49 PM

Not a Cummins build here but here is my setup: Treadstone intercooler

**Dieselwrencher** · 08-20-2014, 04:06 PM

Joel, looks like a cool build you have going. Do you have a build thread anywhere on it?

joel.e · 08-20-2014, 08:10 PM

Quote:

Originally Posted by Dieselwrencher

Joel, looks like a cool build you have going. Do you have a build thread anywhere on it?

Sorry no build thread. Thought about it but I'm so slow most people would lose interest... I've lost interest a few times.

ryanroo · 08-20-2014, 08:24 PM

Quote:

Originally Posted by joel.e

Sorry no build thread. Thought about it but I'm so slow most people would lose interest... I've lost interest a few times.

Nonsense! Ryan's thread has been an active(ish) build for like 14 years. Mine is only slightly less. when the progress stops, we resort to telling lies and giving people crap. that is SOP. we need a build thread! there arent many Dmax swaps around!

**Dieselwrencher** · 08-21-2014, 07:03 PM

14yrs, LMAO! It might be 14yrs before it is driven again though......................

You definitely should start a thread Joel. If I can unload some more Cummins stuff, I may sway to a Dmax for one build.

08-04-2014, 03:27 PM	#1
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 494	Intercooler Anyone have any detailed pictures of 67-72 Intercooler set ups? I've thought about running air to water, I have a second gen cummins I was going to cut 2" off of and notch grille support. Just looking for ideas! Thanks __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

08-04-2014, 09:13 PM	#2
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: Intercooler my solution uses the second gen radiator and intercooler. mounts in the same fashion as OEM. no mods necessary for off the shelf replacement. very little clearancing on the hood latch to bolt in as original. may require more mods for a condenser or anything else in front. __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

08-04-2014, 09:18 PM	#3
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 494	Re: Intercooler Thanks for the pictures Ryanroo, i just went through you entire build and love it! Since i have a second gen intercooler and access to a radiator core i think I may get another core support and try something similar. Looks great! Did you keep the center grille support? __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

08-05-2014, 04:14 PM	#5
Dewey72 Registered User Join Date: Jun 2013 Location: Canby OR Posts: 67	Re: Intercooler Cut 2 rows off of mine and trimmed the tanks to mach.

08-05-2014, 04:40 PM	#6
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 494	Re: Intercooler Thanks for the pics dewey, looks like you kept the stock radiator? 3 core? __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

08-05-2014, 05:49 PM	#7
Dewey72 Registered User Join Date: Jun 2013 Location: Canby OR Posts: 67	Re: Intercooler Ya got the stock radiator 3 core. Got a buddy running a 6bt in a early ramcharger with no fans and no problems. Can drop a aluminum 3 core in it fi it is but don't think it will be.

08-18-2014, 07:49 PM	#8
joel.e Registered User Join Date: Jul 2012 Location: Moseley, VA Posts: 164	Re: Intercooler Not a Cummins build here but here is my setup: Treadstone intercooler __________________ 1967 C10 SWB Fleetside Duramax/Allison 1966 Chevelle Malibu, EFI BBC, pro touring starter kit

08-20-2014, 04:06 PM	#9
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Intercooler Joel, looks like a cool build you have going. Do you have a build thread anywhere on it? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-21-2014, 07:03 PM	#12
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Intercooler 14yrs, LMAO! It might be 14yrs before it is driven again though...................... You definitely should start a thread Joel. If I can unload some more Cummins stuff, I may sway to a Dmax for one build. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 08-21-2014 at 07:17 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.