|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-06-2014, 06:11 PM
|
#1 |
|
Registered User
 
Join Date: Jan 2012
Location: Arizona Bay
Posts: 145
|
Front brake line clearance issue with dropped spindles?
I was at the exhaust shop earlier and took the opportunity to inspect the underside of my truck while it was up on their drive-on rack. The thing that immediately grabbed my attention was that the driver side brake line was smashed against the McGaughy 2.5" dropped spindle. Dafuq?? I don't know how I hadn't noticed it until now, but I suppose that's neither here nor there... The passenger side is tight, but not like the other side.
My question is, can I just slightly bend the hard portion of the line until it clears the spindle? Using minimal pressure and without kinking the line, of course... Can I turn the banjo fitting 180º? Has anyone had this issue before??   Driver side:  Passenger side:  Thanks in advance! |
|
|
|
08-06-2014, 06:19 PM
|
#2 |
|
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Front brake line clearance issue with dropped spindles?
Bend it very carefully, just a bit to clear. When I put mine on I ran them like that for a bit and then replaced the lines with new ones, and did not reattach to the a arm, I did not have that problem anymore.
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
|
|
|
|
08-06-2014, 06:31 PM
|
#3 |
|
Registered User
Join Date: Jan 2012
Location: Arizona Bay
Posts: 145
|
Re: Front brake line clearance issue with dropped spindles?
Awesome, I'll do the same. Thanks for the help!
|
|
|
|
|
08-06-2014, 06:34 PM
|
#4 |
|
Registered User
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,566
|
Re: Front brake line clearance issue with dropped spindles?
Looks like you could use some mew line bud. Just sayin.
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 |
|
|
|
|
08-06-2014, 06:59 PM
|
#5 |
|
Registered User
Join Date: Jan 2012
Location: Arizona Bay
Posts: 145
|
Re: Front brake line clearance issue with dropped spindles?
Yep, already got a new pair of lines ordered.
|
|
|
|
|
08-07-2014, 07:45 AM
|
#6 |
|
Registered User
Join Date: Jul 2007
Location: Sims, NC
Posts: 531
|
Re: Front brake line clearance issue with dropped spindles?
Yep, I've always had to bend the hard line at the calipers with drop spindles.
Mike
__________________
All things Chevy truck: 1986 SWB "Jolene" boosted 5.3/4l80e project |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
