GA cab, bedsides (lwb), and tilt column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bdeese · 08-24-2014, 08:24 PM

Got some extra parts from a purchase I made this weekend, now this stuff needs to go.

cab = sold

bdeese · 08-24-2014, 08:27 PM

bed sides = sold!

bdeese · 08-24-2014, 08:30 PM

dont know much about this one. Came in a box with the truck. Tilt column looks to be for auto. Has been painted (poorly). no shifter or indicator. I don't know what all it's supposed to have, so I don't know what all's missing. $150

bdeese · 08-24-2014, 08:32 PM

pickup in middle ga only. I'm just off I75 on exit 144

**zicc1835** · 08-24-2014, 10:41 PM

lmk if you end up parting the cab i need a low hump patch

**70shortfleet** · 08-24-2014, 11:12 PM

I'm interested in the tilt but need a few more pictures of the top side. Is that $150 shipped?

bdeese · 08-25-2014, 07:32 AM

Haven't considered shipping it yet, I'd rather it be picked up. What's the best way to ship something like this?

waylonbud · 08-26-2014, 01:08 PM

Interested in the lwb sides if the bottom half is not rusted. Im not worried about the hole cut in the one.
Thank you.

bdeese · 08-26-2014, 01:27 PM

I'll take more pics today when I get home waylon. I have a another bedside from a rotten shortbed that you can get a patch from if you'd like.

bdeese · 08-26-2014, 07:38 PM

bedsides look good. only really bad places are the lip where the floor attaches.

waylonbud · 08-26-2014, 08:25 PM

They look decent. Would you consider $130 for both. Sorry, I got to ask.

bdeese · 08-26-2014, 08:34 PM

I'll do $130 picked up.

waylonbud · 08-26-2014, 09:08 PM

Sounds good. Can I pick up this sat? Pay a little now or all when I pick up?

bdeese · 08-26-2014, 09:10 PM

All @ pick up is fine. This saturday is fine also.

waylonbud · 08-26-2014, 09:18 PM

Looks like you are about 4 hrs away. I could be there between 6-7 pm if that is ok. Send me your address whenever. Thanks

crob35 · 08-26-2014, 10:19 PM

Is that the only rust on the cab?

bdeese · 08-27-2014, 07:40 AM

crob, just going from memory, there is rust in front of the visors up top, on the passenger floor in front of the door, and on the passenger side where the windshield mounts. I'll check it over this afternoon and verify but that's all I remember right now...

bdeese · 08-31-2014, 08:59 AM

Bump. Cab $200. Going to scrap soon if no interest. Also have a really good left fender - $100 pick up only. I'll get pics later today.

crob35 · 08-31-2014, 12:49 PM

I will take the cab for $200. I can pick it up on Thursday or Saturday, If that will work.

bdeese · 08-31-2014, 03:47 PM

Thats fine. Saturday will be better for me.

**t korinek** · 08-31-2014, 06:29 PM

Selling the motor mounts that are mounted to the frame?

bdeese · 08-31-2014, 07:10 PM

No i need them.

bdeese · 08-31-2014, 08:02 PM

Wait, t korinek, do you mean the stands? I have two sets of those. I can let one go if thats what you want.

crob35 · 08-31-2014, 08:04 PM

Saturday is fine. I just need your address and number. thanks

**t korinek** · 08-31-2014, 10:22 PM

Ya the stands, the ones in the pic, I think they are for a big block,how much shipped? They should fit in a usps medium flat rate box.
Thanks

08-24-2014, 08:24 PM	#1
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	cab, bedsides (lwb), and tilt column Got some extra parts from a purchase I made this weekend, now this stuff needs to go. cab = sold Attached Images Last edited by bdeese; 09-06-2014 at 10:18 AM.

08-24-2014, 08:27 PM	#2
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column bed sides = sold! Attached Images Last edited by bdeese; 09-06-2014 at 10:18 AM.

08-24-2014, 08:30 PM	#3
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column dont know much about this one. Came in a box with the truck. Tilt column looks to be for auto. Has been painted (poorly). no shifter or indicator. I don't know what all it's supposed to have, so I don't know what all's missing. $150 Attached Images

08-24-2014, 08:32 PM	#4
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column pickup in middle ga only. I'm just off I75 on exit 144

08-24-2014, 10:41 PM	#5
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,246	Re: cab, bedsides (lwb), and tilt column lmk if you end up parting the cab i need a low hump patch __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

08-24-2014, 11:12 PM	#6
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,228	Re: cab, bedsides (lwb), and tilt column I'm interested in the tilt but need a few more pictures of the top side. Is that $150 shipped?

08-25-2014, 07:32 AM	#7
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column Haven't considered shipping it yet, I'd rather it be picked up. What's the best way to ship something like this?

08-26-2014, 01:08 PM	#8
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: cab, bedsides (lwb), and tilt column Interested in the lwb sides if the bottom half is not rusted. Im not worried about the hole cut in the one. Thank you.

08-26-2014, 01:27 PM	#9
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column I'll take more pics today when I get home waylon. I have a another bedside from a rotten shortbed that you can get a patch from if you'd like.

08-26-2014, 07:38 PM	#10
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column bedsides look good. only really bad places are the lip where the floor attaches. Attached Images

08-26-2014, 08:25 PM	#11
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: cab, bedsides (lwb), and tilt column They look decent. Would you consider $130 for both. Sorry, I got to ask.

08-26-2014, 08:34 PM	#12
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column I'll do $130 picked up.

08-26-2014, 09:08 PM	#13
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: cab, bedsides (lwb), and tilt column Sounds good. Can I pick up this sat? Pay a little now or all when I pick up?

08-26-2014, 09:10 PM	#14
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column All @ pick up is fine. This saturday is fine also.

08-26-2014, 09:18 PM	#15
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: cab, bedsides (lwb), and tilt column Looks like you are about 4 hrs away. I could be there between 6-7 pm if that is ok. Send me your address whenever. Thanks



Register or Log In To remove these advertisements.

08-26-2014, 10:19 PM	#16
crob35 Registered User Join Date: Jan 2009 Location: albany,ga Posts: 82	Re: cab, bedsides (lwb), and tilt column Is that the only rust on the cab?

08-27-2014, 07:40 AM	#17
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column crob, just going from memory, there is rust in front of the visors up top, on the passenger floor in front of the door, and on the passenger side where the windshield mounts. I'll check it over this afternoon and verify but that's all I remember right now... Attached Images

08-31-2014, 08:59 AM	#18
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column Bump. Cab $200. Going to scrap soon if no interest. Also have a really good left fender - $100 pick up only. I'll get pics later today.

08-31-2014, 12:49 PM	#19
crob35 Registered User Join Date: Jan 2009 Location: albany,ga Posts: 82	Re: cab, bedsides (lwb), and tilt column I will take the cab for $200. I can pick it up on Thursday or Saturday, If that will work.

08-31-2014, 03:47 PM	#20
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column Thats fine. Saturday will be better for me.

08-31-2014, 06:29 PM	#21
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: cab, bedsides (lwb), and tilt column Selling the motor mounts that are mounted to the frame? __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-31-2014, 07:10 PM	#22
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column No i need them.

08-31-2014, 08:02 PM	#23
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: cab, bedsides (lwb), and tilt column Wait, t korinek, do you mean the stands? I have two sets of those. I can let one go if thats what you want.

08-31-2014, 08:04 PM	#24
crob35 Registered User Join Date: Jan 2009 Location: albany,ga Posts: 82	Re: cab, bedsides (lwb), and tilt column Saturday is fine. I just need your address and number. thanks

08-31-2014, 10:22 PM	#25
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: cab, bedsides (lwb), and tilt column Ya the stands, the ones in the pic, I think they are for a big block,how much shipped? They should fit in a usps medium flat rate box. Thanks __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

Register or Log In To remove these advertisements.