Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-12-2014, 01:48 PM | #1 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Finally...a new shop at the house
I'm just getting started on my new home shop/building, so I don't have much to actually show right now. But, I have pics, so I figured that's a reason to post
Initial excavation for shop area has been completed. I have plenty of property, but most of it is below flood plain due to the Warrior river in my backyard. So to overcome that problem, we excavated an area to tuck the building in close to the house in the hillside...figured that way if I have to many I'll be able to get home . Building will be 30x50' with a 20x50" lean too down one side for trailers and pending projects . 3/3/15 Update: size shifted to a primary shop of 36'x46' with a couple of smaller add on areas...8'x18' & 20'x24' with a 16' wall height. Last edited by nlped; 03-03-2015 at 11:28 PM. |
09-12-2014, 01:51 PM | #2 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
Post rough excavation. Going to let it sit for a few weeks and hope for some nice slow/steady rains to help settle everything in. Then I'll start on the footings and poured North wall...
|
09-12-2014, 07:17 PM | #3 |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Finally...a new shop at the house
a hole for your shop is something... something awesome
do you have any dirt down there? i see rock and more rock
__________________
cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer |
09-12-2014, 09:44 PM | #4 |
Registered User
Join Date: Sep 2013
Location: Evansville, IN
Posts: 1,774
|
Re: Finally...a new shop at the house
Nice. I have a 32x40 and it's great. Would love a lean-to to free up garage space at times but don't have the room.
__________________
Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold |
09-12-2014, 10:09 PM | #5 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
OMG...the rock was crazy. The good thing is that it'll keep the area stable...so a few extra hours in the skid steer and it's ready.
|
09-13-2014, 10:40 AM | #6 |
Registered User
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
|
Re: Finally...a new shop at the house
Alright Ed! Looking forward to seeing your shop get built. I'll drink a Shiner after work for you.
__________________
Cheers - Wayne Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966 '55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157 1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy" 1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55 Nothing sucks more than that moment during an argument when you realize you're wrong. |
09-17-2014, 11:30 AM | #7 | |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
Quote:
Now get back to work on yours |
|
12-28-2014, 05:17 PM | #8 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
Nothing picture worthy, but we've finally had plenty of rain to settle the soil and my nerves. The soil/site has stayed right where it should, so I pulled the trigger and will start grading the pad and digging the footings tomorrow afternoon.
Final size of the building will be 36x50 (eventually with a 10x50 lean too down the south wall). Footings will be 15" deep x 12" tall, and the pad will be 6" thick. May be overkill, but I don't want to risk it not being sturdy enough for anything I may want to do here in the future... After that gets done, I'll start saving for the block work on the north wall...It'll be 50' long and 8' tall and I don't do block work so I'll be farming that out. It's got to be able to hold back the backfill so I want someone with more experience to do that part. I'll get some pics as I progress... |
12-28-2014, 05:36 PM | #9 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Finally...a new shop at the house
I built my house in 2000 and since we have underground utilities I went ahead and ran 300 amp service to the house in hopes of building a shop in back... but that never happened and now we're looking to get it ready to sell in a couple years. (youngest kids are now 20, so they all gotta get out of the nest)
Ive regretted not building the shop for years but I hope to get enough out of it to find something smaller with a shop ready to go down South. I gotta get out of Ohio, this place is killing me. Good luck on the build and may you have many years of fun times in it.
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
12-28-2014, 07:33 PM | #10 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
^^^ Thanks man. Out oldest is 16 & when she decides what she's going to do about college we hope to move to southwest Florida. Small house with a big shop
|
12-29-2014, 10:43 PM | #11 |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Finally...a new shop at the house
when we go south... i'm trying to talk my wife into buying a big shop and live in back
15'' deep footing is over kill? wtf??? up here we have to build half of a building down, around here the frost line is 40'', footings here go to 48'' dat's a whole lot of concrete i had to dig under my barn footing to get water inside for a sink, had to dig a 5 foot deep hole i could have gone through at 4 feet but it's an old barn with a 2 foot wide stone/rubble foundation
__________________
cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer |
12-29-2014, 10:51 PM | #12 | |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
Quote:
What's a frost line. people here will literally pour just a 4" pad on top of a gravel base without footings. We don't have the freezing issues y'all have, but we do have rednecks, pretty country girls in skimpy shorts and lots of 'shine. |
|
12-31-2014, 08:01 PM | #13 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
To dark to shoot any pics but after manipulating, calculating and such, the building will be 36'x48', but no good way to do a functional lean-to down the long side . Footings are dug and form boards are up though. I do end up with a good bit of space off the rear of the pad that I may add a lean-to on for just lawn mower & related storage, air compressor and such though.
Can't pour concrete until Monday at the earliest because of the d@mn rain expected this weekend. I needed rain for 3 months and got none...now I've had about 14" in 2 weeks. Hopefully this weekend will be minimal drizzle... |
12-31-2014, 09:15 PM | #14 |
Registered User
Join Date: Oct 2009
Location: canton ga
Posts: 12,724
|
Re: Finally...a new shop at the house
Cant wait to see your building ,I need ideas for my next one .
|
01-01-2015, 01:18 PM | #15 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
Just a couple of quick shots of the shop layout... One with the relationship to the house...
We are expectiong a bunch of rain the next 2-3 days, and the footings already have some water in them because it just keeps raining. Suppose to be nice next week, so hopefully I can get the concrete poured then. |
01-01-2015, 01:50 PM | #16 |
Registered User
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
|
Re: Finally...a new shop at the house
Looking good. I know you're excited
__________________
Cheers - Wayne Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966 '55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157 1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy" 1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55 Nothing sucks more than that moment during an argument when you realize you're wrong. |
01-02-2015, 10:41 AM | #17 |
Registered User
Join Date: Aug 2011
Location: Gallatin, TN
Posts: 782
|
Re: Finally...a new shop at the house
You forgot Moma, trains and pickup trucks...
__________________
77 C10, 6.0LS/4L80E, 3:73 12 bolt. Boss 338's 20" x 10" w/ 285/50/20 rear. 20" x 8.5" w/ 245/40/20 front. Vintage Air. Full Autometer gauges recessed in factory bezel (Thanks bigblock73!) Gm Storm Grey Metallic paint "Cool ain't ever cheap and cheap ain't ever cool" |
01-02-2015, 09:17 PM | #18 |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Finally...a new shop at the house
wtf? no hound dogs???
__________________
cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer |
01-02-2015, 09:21 PM | #19 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
|
01-07-2015, 01:46 PM | #20 |
Registered User
Join Date: Nov 2014
Location: Austin, TX
Posts: 281
|
Re: Finally...a new shop at the house
The wife and I are discussing a move sometime in the next ten years out of California to a place where land/housing costs are far more reasonable. Texas is the current front-runner. My dream is several acres and a big shop located far enough away from the house so that late-night wrenching and heavy metal blasting won't bother her too much.
Until then, I'll just follow this thread and live vicariously.
__________________
72 K2500 Sierra Longbed Wideside 350/TH350/NP205 66 Plymouth Barracuda 225 Slant6 |
01-07-2015, 02:28 PM | #21 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
Haha... Well welcome to the board and thanks for following along. Tx sure does get HOT, I lived there before moving to Alabama and I don't miss the heat. Check out the Barnasaurus thread...that TX shop is AWESOME!
I'm trying to talk the wife into northern Idaho and starting to get some headway. Maybe when our youngest daughter finishes school next year?!? |
01-07-2015, 03:58 PM | #22 |
Registered User
Join Date: Nov 2014
Location: Austin, TX
Posts: 281
|
Re: Finally...a new shop at the house
Just looked at the Barnasaurus thread. Yeah, that's pretty damn close to what I hope to have. Holy cow, so envious.
__________________
72 K2500 Sierra Longbed Wideside 350/TH350/NP205 66 Plymouth Barracuda 225 Slant6 |
01-07-2015, 04:38 PM | #23 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
Yep, don't we all!!!
|
01-20-2015, 04:17 PM | #24 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: Finally...a new shop at the house
Finally an update. Let this do a couple of weeks worth of drying and then the block walls are next.
Last edited by nlped; 01-20-2015 at 05:36 PM. |
01-20-2015, 05:39 PM | #25 |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Finally...a new shop at the house
block? i like the sound of that...
all block walls or just against the hill? my neck has a kink in it
__________________
cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer |
Bookmarks |
|
|