AL Part out of 1967 Open Road Camper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nlped** · 10-12-2014, 05:27 PM

Well after much diliberation, I've decided to part this one out.

1967 Chevrolet Open Road Campers INC motorhome.

I'm keeping the motor, complete doors for another project, but most everything else is available.

Lights, grille, any trim, brake & steering related pieces, TH400 trans, interior pieces etc.

There are additional pictures in my "Chubby" build thread.

Ask about pieces/parts here and I'll try and post pics as quickly as possible with a price.

Thanks...

All prices quoted are plus Paypal fees...

**nlped** · 10-12-2014, 05:29 PM

I've sold the roof air, generator, and the awning...

All windows, side door, rear sliding glass door are intact and functioning. So are the original camper interior propane lanterns by Humphrey.

Dirt's72 · 10-12-2014, 05:46 PM

Interested in the dash pad if original.

REEDS 72 · 10-12-2014, 06:02 PM

Pics of gauge cluster.

**nlped** · 10-12-2014, 06:07 PM

Quote:

Originally Posted by Dirt's72

Interested in the dash pad if original.

It certainly appears to be original. No damage that I can report. It is the same color as the dash and the interior color of the doors and any visible original paint...

Tough to get a good picture, but here are a few...

$65 plus shipping?

**nlped** · 10-12-2014, 06:08 PM

Quote:

Originally Posted by REEDS 72

Pics of gauge cluster.

You can see from the above pics... The cluster AIN'T original

I do have an original cluster from my '68 though...

**nlped** · 10-12-2014, 06:11 PM

This has a 4-speed high hump in it too

Undone · 10-12-2014, 06:30 PM

Condition and price of both fenders? Would you ship?

**nlped** · 10-12-2014, 06:35 PM

Quote:

Originally Posted by Undone

Condition and price of both fenders? Would you ship?

The fenders are in really good shape, but as you can see from the pics, the PO did drill a couple of holes in them for aftermarket trailer style parking lights

and the passenger one will have holes in it from the upright where the awning hardware is mounted...

I'd ship, but I have no idea how much shipping would run...

They are very solid with no visible rust, even in the super common passenger front cup.

$65 each?

jjzepplin · 10-12-2014, 06:36 PM

I'll take the radio pending price and model etc.33578 zip

**too much stuff** · 10-12-2014, 06:39 PM

Seat belts and glovebox door?

**jabborabbo** · 10-12-2014, 06:39 PM

Wipers/lights knobs/switches and heater/defroster control unit shipped to 75801?

Thanks!

**nlped** · 10-12-2014, 06:40 PM

Quote:

Originally Posted by jjzepplin

I'll take the radio pending price and model etc.33578 zip

The radio is an aftermarket Pioneer 2-post radio...is that what you're wanting?

**nlped** · 10-12-2014, 06:42 PM

Quote:

Originally Posted by too much stuff

Seat belts and glovebox door?

Seat belts aren't original...some sort of aftermarket burgundy 3 point belts.

Glove box door would be $50 shipped?

**nlped** · 10-12-2014, 06:48 PM

Quote:

Originally Posted by jabborabbo

Wipers/lights knobs/switches and heater/defroster control unit shipped to 75801?

Thanks!

The wiper and headlight switches both work properly, and the heater control slides as it should.

$65 shipped?

Dirt's72 · 10-12-2014, 06:51 PM

Quote:

Originally Posted by nlped

It certainly appears to be original. No damage that I can report. It is the same color as the dash and the interior color of the doors and any visible original paint...

Tough to get a good picture, but here are a few...

$65 plus shipping?

Sounds good. If you don't mind one more pic of the backside of it when you get it taken out. Also if you can get the defrost vents out without breaking the tabs let me know. Thank You.

**nlped** · 10-12-2014, 06:53 PM

Quote:

Originally Posted by Dirt's72

Sounds good. If you don't mind one more pic of the backside of it when you get it taken out. Thanks

No problem... It's raining here, so I'll wait to remove. I may melt

Dirt's72 · 10-12-2014, 06:55 PM

Sorry I edited about the defrost vents too. Thanks.

chuckmc8 · 10-12-2014, 07:00 PM

Is the cab rust free? Price for cab and complete front clip (except the hood ;-) picked up please

**jabborabbo** · 10-12-2014, 07:01 PM

Quote:

Originally Posted by nlped

The wiper and headlight switches both work properly, and the heater control slides as it should.

$65 shipped?

Sounds good! PM me payment info!

**nlped** · 10-12-2014, 07:08 PM

Quote:

Originally Posted by jabborabbo

Sounds good! PM me payment info!

Pm'ed you Paypal info, be sure to send me your shipping address.

Thanks,

**nlped** · 10-12-2014, 07:11 PM

Quote:

Originally Posted by chuckmc8

Is the cab rust free? Price for cab and complete front clip (except the hood ;-) picked up please

The cab is completely rust free, but it has a MASSIVE hole in it where the cab to camper pass through is. It would be a great one for repair cuts, or if you're handy, putting in the appropriate section to repair the area.

No to the HOOD

The front clip would be $250

68panelman · 10-12-2014, 07:26 PM

What ever happened with the sale of this?, Weren't you asking $1200-1500?. Damn shame you couldn't sell it whole. It's a really nice camper.

chuckmc8 · 10-12-2014, 07:31 PM

Quote:

Originally Posted by nlped

The cab is completely rust free, but it has a MASSIVE hole in it where the cab to camper pass through is. It would be a great one for repair cuts, or if you're handy, putting in the appropriate section to repair the area.

No to the HOOD

The front clip would be $250

Didnt think about the pass thru hole. It cut the roof out too, right?

How about a price for the complete ac system?

**nlped** · 10-12-2014, 07:32 PM

Quote:

Originally Posted by 68panelman

What ever happened with the sale of this?, Weren't you asking $1200-1500?. Damn shame you couldn't sell it whole. It's a really nice camper.

I'm the guy who bought it, drug it 250 miles home, replaced a bunch of pieces/fluids to get it running. The camper section is rough as a night in jail, and just wasn't a cost effective project

10-12-2014, 05:27 PM	#1
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Part out of 1967 Open Road Camper Well after much diliberation, I've decided to part this one out. 1967 Chevrolet Open Road Campers INC motorhome. I'm keeping the motor, complete doors for another project, but most everything else is available. Lights, grille, any trim, brake & steering related pieces, TH400 trans, interior pieces etc. There are additional pictures in my "Chubby" build thread. Ask about pieces/parts here and I'll try and post pics as quickly as possible with a price. Thanks... All prices quoted are plus Paypal fees... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha Last edited by nlped; 10-12-2014 at 06:48 PM.

10-12-2014, 05:29 PM	#2
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Part out of 1967 Open Road Camper I've sold the roof air, generator, and the awning... All windows, side door, rear sliding glass door are intact and functioning. So are the original camper interior propane lanterns by Humphrey. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-12-2014, 05:46 PM	#3
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Part out of 1967 Open Road Camper Interested in the dash pad if original.

10-12-2014, 06:02 PM	#4
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Part out of 1967 Open Road Camper Pics of gauge cluster.

10-12-2014, 06:11 PM	#7
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Part out of 1967 Open Road Camper This has a 4-speed high hump in it too __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-12-2014, 06:30 PM	#8
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: Part out of 1967 Open Road Camper Condition and price of both fenders? Would you ship?

10-12-2014, 06:36 PM	#10
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,567	Re: Part out of 1967 Open Road Camper I'll take the radio pending price and model etc.33578 zip __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

10-12-2014, 06:39 PM	#11
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Part out of 1967 Open Road Camper Seat belts and glovebox door? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-12-2014, 06:39 PM	#12
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 769	Re: Part out of 1967 Open Road Camper Wipers/lights knobs/switches and heater/defroster control unit shipped to 75801? Thanks!

10-12-2014, 06:55 PM	#18
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Part out of 1967 Open Road Camper Sorry I edited about the defrost vents too. Thanks.

10-12-2014, 07:00 PM	#19
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Part out of 1967 Open Road Camper Is the cab rust free? Price for cab and complete front clip (except the hood ;-) picked up please __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e Last edited by chuckmc8; 10-12-2014 at 07:05 PM.

10-12-2014, 07:26 PM	#23
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,458	Re: Part out of 1967 Open Road Camper What ever happened with the sale of this?, Weren't you asking $1200-1500?. Damn shame you couldn't sell it whole. It's a really nice camper.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.