KS 292 with power steering - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nickv6266 · 10-23-2014, 12:01 PM

I'm going to pull the 292 out of my C30 and toss in a 454 I have laying around. 292 ran but has been setting awhile, its not locked from setting still spins over. Truck is not being parted. This is for engine only. Thanks

Complete 292 breather to pan $650
Power steering only $350
292 minus accessories $300
I have an hei that I've set back for this motor used $75obo

If someone out of state wants motor it can be paid for and set back until you can pick up.

Woodnears · 10-23-2014, 12:07 PM

How many miles on this?

nickv6266 · 10-23-2014, 12:27 PM

Quote:

Originally Posted by Woodnears

How many miles on this?

61k 1 owner local truck.

**l79m20** · 10-23-2014, 07:44 PM

Take some nice clear photos of the power steering set-up as well as the individual components please, as their are some of us that need a good set of eyes to figure out how it all goes together. I'm one of these. Thanks in advance............Kirby

nickv6266 · 10-23-2014, 07:49 PM

Quote:

Originally Posted by l79m20

Take some nice clear photos of the power steering set-up as well as the individual components please, as their are some of us that need a good set of eyes to figure out how it all goes together. I'm one of these. Thanks in advance............Kirby

Kirby are you wanting reference pics or interested in the engine?

nickv6266 · 10-23-2014, 07:58 PM

If someone needs better pics before purchasing I can take more pics with better camera.These were phone pics.

**l79m20** · 10-23-2014, 08:06 PM

Was looking for reference pics.........thanks

nickv6266 · 10-24-2014, 02:19 PM

Power steering setup is $350 shipped to lower 48 .Didn't have that listed.

**Chevyland** · 10-24-2014, 07:12 PM

I am interested in power steering set up. Are all brackets and pulleys included? I'll need to look at my engine while you are looking at yours to match things up. Thanks, Eric. I guess pm may be best to exchange #s.

nickv6266 · 10-24-2014, 10:53 PM

Quote:

Originally Posted by Chevyland

I am interested in power steering set up. Are all brackets and pulleys included? I'll need to look at my engine while you are looking at yours to match things up. Thanks, Eric. I guess pm may be best to exchange #s.

All brackets and pulleys will be included. If you say ill take it your locked in on the sale. First come first serve . Thanks for your interest.

nickv6266 · 10-27-2014, 01:31 AM

..

Littletony · 10-27-2014, 05:13 AM

How much for the air cleaner?

Lokin4AReason · 10-27-2014, 07:52 AM

pm sent ....

**29od1** · 10-27-2014, 08:26 AM

Hey Nick,

I'd be interested in the air cleaner and attaching brackets if Littletony passes.

Thanks,
David

CST10 · 10-27-2014, 05:27 PM

What is the carburator model number off the side of it? Interested. Pm me the info and price if interested in selling the carb.

Also is that an oil bath oil cleaner? If not, I'm interested in that too.

Thanks.

nickv6266 · 10-27-2014, 06:19 PM

OK I was hoping to get this sold power steering separate from motor. I would like to keep motor complete minus power steering as that will not hurt the sell of engine. If the power steering does not sell or engine does not sell separate I will just hang on to it. Sorry for confusion I just hate to sell this engine in pieces and would like to see it sell as complete as possible and go to a good home.thanks..

Elliot949 · 10-27-2014, 07:24 PM

Hey Nick... Is that truck sitting out by Silverdale?

nickv6266 · 10-27-2014, 07:51 PM

Quote:

Originally Posted by Elliot949

Hey Nick... Is that truck sitting out by Silverdale?

No its at my place behind the barns. Its been up in your neck of the woods it's whole life crest petroleum was the original company name. They bought it new and had it until I got it.

Elliot949 · 10-27-2014, 09:22 PM

Cool...there is one like it out by silverdale so I thought maybe it was the same... to bad my truck isn't done I would get this from you and make a dually pickup out of it..

**Chevyland** · 10-27-2014, 09:34 PM

Sorry it took so long to get back about the power steering. I'll take it with all the pulleys etc. I looked at my engine against your pictures. I definitely need the Pully the fan is attached to, mine is only a single. Also it would be helpfull to have close up pictures for the installation. Pm info for payment and I'll give you shipping info. Thanks, Eric

nickv6266 · 10-28-2014, 12:21 AM

Quote:

Originally Posted by Chevyland

Sorry it took so long to get back about the power steering. I'll take it with all the pulleys etc. I looked at my engine against your pictures. I definitely need the Pully the fan is attached to, mine is only a single. Also it would be helpfull to have close up pictures for the installation. Pm info for payment and I'll give you shipping info. Thanks, Eric

No problem. Ill get really good pics and pm paypal info. Thanks..

496bb · 01-13-2015, 06:52 PM

still looking to sell engine? PM me please. thanks.

10-23-2014, 12:01 PM	#1
nickv6266 Registered User Join Date: May 2008 Location: Arkansas city Kansas Posts: 398	292 with power steering I'm going to pull the 292 out of my C30 and toss in a 454 I have laying around. 292 ran but has been setting awhile, its not locked from setting still spins over. Truck is not being parted. This is for engine only. Thanks Complete 292 breather to pan $650 Power steering only $350 292 minus accessories $300 I have an hei that I've set back for this motor used $75obo If someone out of state wants motor it can be paid for and set back until you can pick up. Attached Images

10-23-2014, 12:07 PM	#2
Woodnears Registered User Join Date: Feb 2010 Location: Dodge city Ks Posts: 620	Re: 292 with power steering How many miles on this?

10-23-2014, 07:44 PM	#4
l79m20 Registered User Join Date: May 2005 Location: Reading, Kansas Posts: 628	Re: 292 with power steering Take some nice clear photos of the power steering set-up as well as the individual components please, as their are some of us that need a good set of eyes to figure out how it all goes together. I'm one of these. Thanks in advance............Kirby

10-23-2014, 07:58 PM	#6
nickv6266 Registered User Join Date: May 2008 Location: Arkansas city Kansas Posts: 398	Re: 292 with power steering If someone needs better pics before purchasing I can take more pics with better camera.These were phone pics.

10-23-2014, 08:06 PM	#7
l79m20 Registered User Join Date: May 2005 Location: Reading, Kansas Posts: 628	Re: 292 with power steering Was looking for reference pics.........thanks

10-24-2014, 02:19 PM	#8
nickv6266 Registered User Join Date: May 2008 Location: Arkansas city Kansas Posts: 398	Re: 292 with power steering Power steering setup is $350 shipped to lower 48 .Didn't have that listed.

10-24-2014, 07:12 PM	#9
Chevyland Senior Member Join Date: Aug 2013 Location: Ca. <-> Ma. Posts: 5,708	Re: 292 with power steering I am interested in power steering set up. Are all brackets and pulleys included? I'll need to look at my engine while you are looking at yours to match things up. Thanks, Eric. I guess pm may be best to exchange #s.

10-27-2014, 01:31 AM	#11
nickv6266 Registered User Join Date: May 2008 Location: Arkansas city Kansas Posts: 398	Re: 292 with power steering ..

10-27-2014, 05:13 AM	#12
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: 292 with power steering How much for the air cleaner? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

10-27-2014, 07:52 AM	#13
Lokin4AReason Registered User Join Date: Oct 2014 Location: a beer can .. Posts: 932	Re: 292 with power steering pm sent .... __________________ dont want to hear excuses, i want to hear solution(s)

10-27-2014, 08:26 AM	#14
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: 292 with power steering Hey Nick, I'd be interested in the air cleaner and attaching brackets if Littletony passes. Thanks, David

10-27-2014, 05:27 PM	#15
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: 292 with power steering What is the carburator model number off the side of it? Interested. Pm me the info and price if interested in selling the carb. Also is that an oil bath oil cleaner? If not, I'm interested in that too. Thanks. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

10-27-2014, 06:19 PM	#16
nickv6266 Registered User Join Date: May 2008 Location: Arkansas city Kansas Posts: 398	Re: 292 with power steering OK I was hoping to get this sold power steering separate from motor. I would like to keep motor complete minus power steering as that will not hurt the sell of engine. If the power steering does not sell or engine does not sell separate I will just hang on to it. Sorry for confusion I just hate to sell this engine in pieces and would like to see it sell as complete as possible and go to a good home.thanks..

10-27-2014, 07:24 PM	#17
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: 292 with power steering Hey Nick... Is that truck sitting out by Silverdale? __________________ Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847 Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210

10-27-2014, 09:22 PM	#19
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: 292 with power steering Cool...there is one like it out by silverdale so I thought maybe it was the same... to bad my truck isn't done I would get this from you and make a dually pickup out of it.. __________________ Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847 Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210



Register or Log In To remove these advertisements.

10-27-2014, 09:34 PM	#20
Chevyland Senior Member Join Date: Aug 2013 Location: Ca. <-> Ma. Posts: 5,708	Re: 292 with power steering Sorry it took so long to get back about the power steering. I'll take it with all the pulleys etc. I looked at my engine against your pictures. I definitely need the Pully the fan is attached to, mine is only a single. Also it would be helpfull to have close up pictures for the installation. Pm info for payment and I'll give you shipping info. Thanks, Eric

01-13-2015, 06:52 PM	#22
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	Re: 292 with power steering still looking to sell engine? PM me please. thanks. __________________ 87 3/4 Burb 454 49 Chev Fleetline Deluxe

Register or Log In To remove these advertisements.