Want to buy '88-? Bench seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72skytop · 08-16-2003, 08:56 AM

I am looking for a really decent Bench seat out of a '88 to '98? Chevrolet Silverado. It can be just a straight seat, 60/40, or out of an extended cab. It just has to be out of a Silverado, be BURGUNDY, can be leather or cloth, and be in good enough condition that it does not have to take an immediate trip to the trim shop. Any leads will also be appreciated. I hear stories of places like custom van conversion places are a good place to try. Anybody know of any to call?

Thanks

phantom dually · 08-23-2003, 09:24 AM

Try a place in louisville Ky called Don Newtons. He does alot of custom upgrades on trucks corvettes etc. Should be able to look him up in the Yellow pages online. Good luck. I have a burgundy 60/40 in my 94 that is in good shape but I cant find the buckets that are burgundy to put back in.

72skytop · 08-24-2003, 09:09 AM

I am having trouble locating this. Is Don Newtons the business name or is this just an individual? I have tried a yellow and white pages look up with no results. I see where you are from Kentucky. Do you live close enough to look up a local listing. Don't worry, I am not asking you to go there. I just live over in Evansville: I can scoot over there in about 3.5 hours. If I could just learn his number so I can call and find out if he has one and where he is at.

Thanks so much for this lead. It is greatly appreciated and I hope you find your buckets.

Kevin Korff
Evansville, IN 47711

72shorty · 08-28-2003, 04:01 PM

Look at www.rascalflats.com call and ask for Greg. I know for a fact that he has what you are looking for as I just spoke to him about it but it's too rich for my blood. Late 80's, early 90's burgandy bench in good shape with fold down arm rest and headrests, he is asking $350.

Tell him Doug King from Independence, MO sent you.

I am going down Sat. to pick up my rear slider and some other misc parts.

72skytop · 08-28-2003, 04:49 PM

Thanks. I'll give Rascal a try.

I got a hold of Don Newtons, but he didn't have anything. He did refer me to somebody else, but he didn't have anything that old. Thanks for trying.

Poonman86 · 08-28-2003, 05:02 PM

just sent you a pm

08-16-2003, 08:56 AM	#1
72skytop Registered User Join Date: May 2003 Location: Evansville, IN Posts: 147	Want to buy '88-? Bench seat I am looking for a really decent Bench seat out of a '88 to '98? Chevrolet Silverado. It can be just a straight seat, 60/40, or out of an extended cab. It just has to be out of a Silverado, be BURGUNDY, can be leather or cloth, and be in good enough condition that it does not have to take an immediate trip to the trim shop. Any leads will also be appreciated. I hear stories of places like custom van conversion places are a good place to try. Anybody know of any to call? Thanks Last edited by 72skytop; 08-16-2003 at 09:37 AM.

08-23-2003, 09:24 AM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Try a place in louisville Ky called Don Newtons. He does alot of custom upgrades on trucks corvettes etc. Should be able to look him up in the Yellow pages online. Good luck. I have a burgundy 60/40 in my 94 that is in good shape but I cant find the buckets that are burgundy to put back in. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-28-2003, 04:01 PM	#4
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	Look at www.rascalflats.com call and ask for Greg. I know for a fact that he has what you are looking for as I just spoke to him about it but it's too rich for my blood. Late 80's, early 90's burgandy bench in good shape with fold down arm rest and headrests, he is asking $350. Tell him Doug King from Independence, MO sent you. I am going down Sat. to pick up my rear slider and some other misc parts. __________________ Douglas King Independence, MO

08-24-2003, 09:09 AM	#3
72skytop Registered User Join Date: May 2003 Location: Evansville, IN Posts: 147	I am having trouble locating this. Is Don Newtons the business name or is this just an individual? I have tried a yellow and white pages look up with no results. I see where you are from Kentucky. Do you live close enough to look up a local listing. Don't worry, I am not asking you to go there. I just live over in Evansville: I can scoot over there in about 3.5 hours. If I could just learn his number so I can call and find out if he has one and where he is at. Thanks so much for this lead. It is greatly appreciated and I hope you find your buckets. Kevin Korff Evansville, IN 47711

08-28-2003, 04:49 PM	#5
72skytop Registered User Join Date: May 2003 Location: Evansville, IN Posts: 147	Thanks. I'll give Rascal a try. I got a hold of Don Newtons, but he didn't have anything. He did refer me to somebody else, but he didn't have anything that old. Thanks for trying.

08-28-2003, 05:02 PM	#6
Poonman86 Registered User Join Date: May 2000 Location: Houston,Texas Posts: 123	just sent you a pm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.