Fleetside Bed Dissassembly Help Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CRGRS 66 · 11-12-2014, 12:34 PM

Hey guys, did some searching, and didn't see anything on this in the FAQ's. This is my first kick at this can, so I could use a little help.

I understand that there are 2 welds on each side of the bed that need to be cut, one is about 1" long, and I have located it and it looks easy enough to deal with, see picture.

The other weld is apparently 4" long, but I don't seem to be able to find it. Could someone show me where I will find this one?

Thank you in advance.

11-12-2014, 12:34 PM	#1
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Fleetside Bed Dissassembly Help Needed Hey guys, did some searching, and didn't see anything on this in the FAQ's. This is my first kick at this can, so I could use a little help. I understand that there are 2 welds on each side of the bed that need to be cut, one is about 1" long, and I have located it and it looks easy enough to deal with, see picture. The other weld is apparently 4" long, but I don't seem to be able to find it. Could someone show me where I will find this one? Thank you in advance. Attached Images __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.