KY Sliding Back Window - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**hooverfish** · 11-14-2014, 03:27 PM

Selling the sliding back window from my 72. It is excellent condition, I just prefer the look of the plain glass so I made the change.

It is tinted, has no rattles, no squeaks, no leaks. I believe this is an original GM window, not repop. Let me know if that is wrong. My 72 did not come with this option so it was added by PO.

Asking $60 plus actual shipping charges.
Paypal preferred but not required.

* * * * SOLD to Stormbear

**DeadheadNM** · 11-14-2014, 05:50 PM

Interested - what would shipping look like to 59901? Also, is one pane embossed with the following logo and are the frame pieces attached by screws in the lower corners? Thanks, Pete

**MidLifer** · 11-14-2014, 08:40 PM

Interested if DeadheadNM passes. Would need shipping to 08057.

**gmc 2500 4x4** · 11-15-2014, 09:40 AM

in line also>>>>>>>>>looks nice

**hooverfish** · 11-15-2014, 11:48 AM

DeadheadNM,

the shipping estimator for FedEx is approx. $55.

I cannot find a logo and there are no screws that I can see.
Does that mean it is not an OEM window ?
Please let me know within 24 hours if you are still interested. .
Thanks

**DeadheadNM** · 11-15-2014, 08:13 PM

Larry thanks, sorry two last questions fellas: are the frame joints (arrow in pic) welded and is the middle rubber seal between the two sliding panes still present? If not welded I'd take it (but if not welded screws should also be seen along the underside of the bottom rail). Non-welded sliders can be disassembled and weatherstripping replaced.

It may not be OEM but may be a period correct add-on like that in my GMC. Haven't seen those vertical "grab bars" on OEM sliders but have them on a avintage aftermarket slider. If the seams aren't welded there should be screws holding the pieces together. From what I can tell, manufactures switched to welding. Is a slider listed on your SPID? That window embossing can fade and be quite subtle but is present on OEM sliders.

**hooverfish** · 11-15-2014, 09:09 PM

DeadheadNM, The corners are welded. There are two rubber seals, each one is on the vertical seam where the 'grab handles' are located. And as I said in the original post, my 72 didn't come with this option so, no, the spid doesn't list the option. Thanks and let me know for sure if you want or don't want this. Take care. Larry

**DeadheadNM** · 11-15-2014, 10:51 PM

Thanks! Will pass to Midlifer - nice window for sure. Will hold out for OEM piece. Pete

**hooverfish** · 11-15-2014, 11:22 PM

Midlifer, you are up. Let me know if you are still interested. I think we have established the window is not OEM. But it is in very nice condition, this truck has been garaged for many years, Thanks

**MidLifer** · 11-16-2014, 09:41 PM

Thanks and sorry to take so long to reply, had company today. I will also pass seeing that this is not an OEM window.

**hooverfish** · 11-16-2014, 10:55 PM

Quote:

Originally Posted by MidLifer

Thanks and sorry to take so long to reply, had company today. I will also pass seeing that this is not an OEM window.

No problem, thanks for looking.

GMC 2500 4x4 , let me know if you are still interested. Thanks.

**hooverfish** · 11-16-2014, 11:05 PM

Quote:

Originally Posted by MidLifer

Thanks and sorry to take so long to reply, had company today. I will also pass seeing that this is not an OEM window.

No problem, thanks for looking.

GMC 2500 4x4 , let me know if you are still interested. Thanks.

**DeadheadNM** · 11-16-2014, 11:55 PM

IMO this is a good deal for a slider and it closely resembles an OEM piece. Good OEM examples seem to be far between. I used several to rebuild one: http://67-72chevytrucks.com/vboard/s...d.php?t=559651

**hooverfish** · 11-17-2014, 12:33 AM

Quote:

Originally Posted by DeadheadNM

IMO this is a good deal for a slider and it closely resembles an OEM piece. Good OEM examples seem to be far between. I used several to rebuild one: http://67-72chevytrucks.com/vboard/s...d.php?t=559651

Thanks Pete, for the link to your rebuild, very interesting to know the history of your search. I made the assumption my window was original before I did any research. Next time I will know what to look for on an OEM window.

**gmc 2500 4x4** · 11-17-2014, 06:16 AM

shipping 14063 business

Critterman71 · 11-17-2014, 07:17 AM

Shipping to 48872 ? business

**hooverfish** · 11-17-2014, 09:39 AM

Quote:

Originally Posted by gmc 2500 4x4

shipping 14063 business

I would sell it shipping included for $95 to your business. The box is a little over 5 feet long and weighs about 20 lbs. Last shipping est. was $45. Thanks

Quote:

Originally Posted by Critterman71

Shipping to 48872 ? business

Critterman71, I will ship it to you too for $95 if GMC2500 4x4 passes. Thanks

**gmc 2500 4x4** · 11-17-2014, 11:10 AM

this is a good buy but will pass, gotta save $$$$ for my brakes. Critterman71 go 4 it

ZOOMY · 11-17-2014, 03:31 PM

Still available ? Is a rural farm address considered a business address....it's where I do business.

**hooverfish** · 11-17-2014, 05:34 PM

Quote:

Originally Posted by ZOOMY

Still available ? Is a rural farm address considered a business address....it's where I do business.

Yes, still available but waiting on Critterman to reply if he wants it. You are next if he does not buy it.
I'm not sure on the criteria for a business address but I don't think it is a big deal, maybe 3 or 4 dollars more on the shipping.

And like I said earlier, I will sell and ship it for $95 total for everything.

stormbear · 11-17-2014, 08:07 PM

If Critterman and Zoomy pass I'll take it for 95.00.Thanks Dave

**hooverfish** · 11-18-2014, 06:15 PM

Critterman, been waiting over 24 hours for a reply. You have until midnight tonight to respond whether you want to buy this window or not.

Tomorrow, Wednesday, 'Zoomy', you have 24 hours to reply yes or no,

Stormbear, you on up on Thursday for an answer if we haven't yet heard from Zoomy.

Thanks to everyone for your interest.
Larry

Critterman71 · 11-19-2014, 06:45 AM

Sorry for the delay was out of town for work yesterday let the next guy have the shot as i am leaving again later today for a week and wont be able to get to my computer or email super deal on a nice window.

javelinmania · 11-19-2014, 02:34 PM

How close to Lexington, KY are you? I will be passing thru the weekend before Christmas and the weekend after. Any objections to someone picking it up?

**hooverfish** · 11-19-2014, 02:45 PM

Quote:

Originally Posted by javelinmania

How close to Lexington, KY are you? I will be passing thru the weekend before Christmas and the weekend after. Any objections to someone picking it up?

I am actually in Lex, Ky. Pick up would be fine.
Keep in mind that Zoomy and Stormbear are still in line for possible purchase.
Thanks

11-14-2014, 03:27 PM	#1
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,125	Sliding Back Window Selling the sliding back window from my 72. It is excellent condition, I just prefer the look of the plain glass so I made the change. It is tinted, has no rattles, no squeaks, no leaks. I believe this is an original GM window, not repop. Let me know if that is wrong. My 72 did not come with this option so it was added by PO. Asking $60 plus actual shipping charges. Paypal preferred but not required. * * * * SOLD to Stormbear Attached Images __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job" Last edited by hooverfish; 11-20-2014 at 06:05 PM.

11-14-2014, 05:50 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,351	Re: Sliding Back Window Interested - what would shipping look like to 59901? Also, is one pane embossed with the following logo and are the frame pieces attached by screws in the lower corners? Thanks, Pete Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-14-2014, 08:40 PM	#3
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,264	Re: Sliding Back Window Interested if DeadheadNM passes. Would need shipping to 08057.

11-15-2014, 09:40 AM	#4
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,897	Re: Sliding Back Window in line also>>>>>>>>>looks nice

11-15-2014, 11:48 AM	#5
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,125	Re: Sliding Back Window DeadheadNM, the shipping estimator for FedEx is approx. $55. I cannot find a logo and there are no screws that I can see. Does that mean it is not an OEM window ? Please let me know within 24 hours if you are still interested. . Thanks __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job" Last edited by hooverfish; 11-15-2014 at 12:15 PM.

11-15-2014, 08:13 PM	#6
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,351	Re: Sliding Back Window Larry thanks, sorry two last questions fellas: are the frame joints (arrow in pic) welded and is the middle rubber seal between the two sliding panes still present? If not welded I'd take it (but if not welded screws should also be seen along the underside of the bottom rail). Non-welded sliders can be disassembled and weatherstripping replaced. It may not be OEM but may be a period correct add-on like that in my GMC. Haven't seen those vertical "grab bars" on OEM sliders but have them on a avintage aftermarket slider. If the seams aren't welded there should be screws holding the pieces together. From what I can tell, manufactures switched to welding. Is a slider listed on your SPID? That window embossing can fade and be quite subtle but is present on OEM sliders. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-15-2014, 09:09 PM	#7
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,125	Re: Sliding Back Window DeadheadNM, The corners are welded. There are two rubber seals, each one is on the vertical seam where the 'grab handles' are located. And as I said in the original post, my 72 didn't come with this option so, no, the spid doesn't list the option. Thanks and let me know for sure if you want or don't want this. Take care. Larry __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job"

11-15-2014, 10:51 PM	#8
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,351	Re: Sliding Back Window Thanks! Will pass to Midlifer - nice window for sure. Will hold out for OEM piece. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-15-2014, 11:22 PM	#9
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,125	Re: Sliding Back Window Midlifer, you are up. Let me know if you are still interested. I think we have established the window is not OEM. But it is in very nice condition, this truck has been garaged for many years, Thanks __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job"

11-16-2014, 09:41 PM	#10
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,264	Re: Sliding Back Window Thanks and sorry to take so long to reply, had company today. I will also pass seeing that this is not an OEM window.

11-16-2014, 11:55 PM	#13
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,351	Re: Sliding Back Window IMO this is a good deal for a slider and it closely resembles an OEM piece. Good OEM examples seem to be far between. I used several to rebuild one: http://67-72chevytrucks.com/vboard/s...d.php?t=559651 __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-17-2014, 06:16 AM	#15
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,897	Re: Sliding Back Window shipping 14063 business

11-17-2014, 07:17 AM	#16
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Sliding Back Window Shipping to 48872 ? business

11-17-2014, 11:10 AM	#18
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,897	Re: Sliding Back Window this is a good buy but will pass, gotta save $$$$ for my brakes. Critterman71 go 4 it

11-17-2014, 03:31 PM	#19
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Re: Sliding Back Window Still available ? Is a rural farm address considered a business address....it's where I do business.



Register or Log In To remove these advertisements.

11-17-2014, 08:07 PM	#21
stormbear Registered User Join Date: May 2011 Location: Claryville NY Posts: 35	Re: Sliding Back Window If Critterman and Zoomy pass I'll take it for 95.00.Thanks Dave

11-18-2014, 06:15 PM	#22
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,125	Re: Sliding Back Window Critterman, been waiting over 24 hours for a reply. You have until midnight tonight to respond whether you want to buy this window or not. Tomorrow, Wednesday, 'Zoomy', you have 24 hours to reply yes or no, Stormbear, you on up on Thursday for an answer if we haven't yet heard from Zoomy. Thanks to everyone for your interest. Larry __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job"

11-19-2014, 06:45 AM	#23
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Sliding Back Window Sorry for the delay was out of town for work yesterday let the next guy have the shot as i am leaving again later today for a week and wont be able to get to my computer or email super deal on a nice window.

11-19-2014, 02:34 PM	#24
javelinmania Registered User Join Date: Sep 2014 Location: Lexington, SC Posts: 126	Re: Sliding Back Window How close to Lexington, KY are you? I will be passing thru the weekend before Christmas and the weekend after. Any objections to someone picking it up?

Register or Log In To remove these advertisements.