IN K10 4x4 Axles, Springs, Wheels & Tires.

[Seventy468]

swapping a k10 4x4 to a k20 4x4. What I have for sale is the leftover 1/2 ton parts.

Axles - unknown gear ratio (can check for serious buyer, these came out of a sbc 4 speed truck if that helps you), nice lockouts up front. Didn't drive the truck a whole lot, but when we did, it drove nice and straight. The front calipers are nearly new, and judging by the receipts the entire brake system was gone through shortly before we purchased it. Please note, the front brake lines are no longer included. They were repurposed.
Springs - are still attached to axles and would like to sell them that way. The front bolts on front springs had to be torched so its safe to say they rubber needs replaced there. The same goes for the rear of the left rear spring.. had to be torched. The rear shackles are still attached. The e-brake cables are still in great shape, and did work before removal.
Wheels - Not sure if they are factory correct or not, but are in good shape (trim needs removed and wheels need cleaned up and painted).
Tires - 31x10.50x15 BFG Radial Long Trail T/A. 3 of the 4 tires are in excellent shape, the 4th looks like it was driven on a misaligned front end a while. In the photos you will see more of the bad tire than good, so you know what you are dealing with. I am sure I am forgetting something but will keep posting when I remember. For serious buyers - if you would like more specific info, or photos please contact me and I will work with you.


Thanks in advance.

Pricing,

Axles/Springs $300
Wheels/Tires $400
or take them all for $600.

[Seventy468]

round 2 of photos

[c3vette4spd]

What year was the truck these came off of and where in Indiana are you exactly?

[Seventy468]

1972, and Columbus, IN

[Seventy468]

Ttt

[Seventy468]

Still for sale. If something peaks your interest let me know.

Thanks

[3sonsdad]

If you're willing to sell the front springs separately I would be interested. Also if you would sell the four beauty rings I would be interested. You can pm me if you like.

[engairuph]

I'm interested in the front axle, not the springs and you said this was out of a 1969 c10. Would like to know gears and does it have disc brakes and calipers any good? Pm me and I'll give you my phone number.

[Seventy468]

Originally Posted by 3sonsdad

If you're willing to sell the front springs separately I would be interested. Also if you would sell the four beauty rings I would be interested. You can pm me if you like.

pm sent

[Seventy468]

Originally Posted by engairuph

I'm interested in the front axle, not the springs and you said this was out of a 1969 c10. Would like to know gears and does it have disc brakes and calipers any good? Pm me and I'll give you my phone number.

Pm sent.

Just realized I never specified what the parts were coming out of. These parts are from a 1972 Chevy K10 4x4 4speed sbc truck. It does have disc up front with good calipers, but the gear ratio is currently unknown. I will however pull a cover and figure that out.

Thanks

[Seventy468]

sale pending on front axle, front springs, beauty rings.

[BlueBullet]

Wondering if you are selling bottom rear axle plate for u bolts if so how much?

Thanks
Nathan

[BlueBullet]

Also what condition pitting, wear, etc.

[Seventy468]

Originally Posted by BlueBullet

Wondering if you are selling bottom rear axle plate for u bolts if so how much?

Thanks
Nathan

It's all for sale, so yes. Not sure on condition, never even gave them a look. Will try to get a photo of them tonight.


Thanks

[Seventy468]

Didn't get an opportunity to get out there last night. Hopefully tonight I will get some time. For anyone interested in big items, I stopped by Fastenal last night and they do ship, so I just need to know weight, size (pallet size), and zip code.

[BlueBullet]

How much do you want for rear bottom u bolt plate? Let me know when you get a chance on condition and shipping to 56231.
Thanks
Nathan

[BLT gmc]

?Are the spring plates on the front axle drill/threaded for a sway bar? Bruce

[Seventy468]

Originally Posted by BlueBullet

How much do you want for rear bottom u bolt plate? Let me know when you get a chance on condition and shipping to 56231.
Thanks
Nathan

Originally Posted by BLT gmc

?Are the spring plates on the front axle drill/threaded for a sway bar? Bruce

I will get those answers info to you all in the a.m. Didnt have a second to step out there this evening, but will make sure I do before I go to work in the morning.

Thanks for your patience.

[Seventy468]

Originally Posted by BlueBullet

How much do you want for rear bottom u bolt plate? Let me know when you get a chance on condition and shipping to 56231.
Thanks
Nathan

Here is a quick photo I snapped this morning. The plates themselves look like they could take a quick blasting and then be in pretty good shape.

PM me if you are still interested.

[Seventy468]

Originally Posted by BLT gmc

?Are the spring plates on the front axle drill/threaded for a sway bar? Bruce

No it does not appear so, however it does look like the boss is there to do it if you wanted to go that route. Let me know.

Thanks

[BLT gmc]

Thank you for looking. Bruce

[Campbel45]

Have you found out what the gear ratio is? I am in Greenwood. Is it all still for sale?

[Seventy468]

Originally Posted by Campbel45

Have you found out what the gear ratio is? I am in Greenwood. Is it all still for sale?

I have not yet, the front end and front springs are spoken for at the moment, and the rear end/springs are still up for grabs. I will do what I can to get the gears checked in the morning.