power sleeve/couple 465 to 205 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JIMs70GMC** · 12-06-2014, 11:24 PM

So I was looking around and found the 10 spline coupler between the NP205 and SM465 is around $85. Wow, does anybody know of a source for a cheaper replacement?

I just found this:

http://www.manualtransmissionpart.com/354695.html

BLAZERMAN · 12-07-2014, 08:05 AM

Found one on EBay for 52.00 and free shipping. Sorry I couldn't get a link to post but the item number is 261689653994

**JIMs70GMC** · 12-07-2014, 03:28 PM

I bought one, I will let you all know how it works out. Thanks Blazerman!

**JIMs70GMC** · 12-11-2014, 08:07 AM

So I got the part in from ebay and it is excellent. I hope to get me tranny back in my truck this weekend.

**CUSTOM/10** · 12-11-2014, 08:30 AM

Hey Jim;

Not sure why your replacing the coupling, but if it's due to it being worn/sloppy then take a good look at the splines on the 465 in-put shaft. These get worn also. The in-put shaft only has about 2" of contact area and it takes a lot of abuse. Just an FYI from past experience

Gary

BLAZERMAN · 12-11-2014, 05:08 PM

Quote:

Originally Posted by JIMs70GMC

So I got the part in from ebay and it is excellent. I hope to get me tranny back in my truck this weekend.

Glad that worked out for ya Jim... Just remember Me if you ever decide to sell that GMC Longstep!

12-06-2014, 11:24 PM	#1
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	power sleeve/couple 465 to 205 So I was looking around and found the 10 spline coupler between the NP205 and SM465 is around $85. Wow, does anybody know of a source for a cheaper replacement? I just found this: http://www.manualtransmissionpart.com/354695.html __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm Last edited by JIMs70GMC; 12-06-2014 at 11:30 PM.

12-07-2014, 08:05 AM	#2
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: power sleeve/couple 465 to 205 Found one on EBay for 52.00 and free shipping. Sorry I couldn't get a link to post but the item number is 261689653994 __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

12-07-2014, 03:28 PM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: power sleeve/couple 465 to 205 I bought one, I will let you all know how it works out. Thanks Blazerman! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

12-11-2014, 08:07 AM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: power sleeve/couple 465 to 205 So I got the part in from ebay and it is excellent. I hope to get me tranny back in my truck this weekend. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

12-11-2014, 08:30 AM	#5
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,851	Re: power sleeve/couple 465 to 205 Hey Jim; Not sure why your replacing the coupling, but if it's due to it being worn/sloppy then take a good look at the splines on the 465 in-put shaft. These get worn also. The in-put shaft only has about 2" of contact area and it takes a lot of abuse. Just an FYI from past experience Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.