Bed length: is it as easy as measuring it? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cam-Shaft · 12-15-2014, 02:13 PM

Is determining the bed length as easy as measuring it? I know its a long bed, but how can I tell if its the ext. long bed or not? Can it be determined from the VIN number?

ERASER5 · 12-15-2014, 02:50 PM

Longhorns are fleet side and have seam about 6 inches from the front of the bed. 8feet 6inches.
A 9foot step side just looks very long from cab to wheel well.

davepl · 12-15-2014, 03:35 PM

It's on the SPID. Not the VIN at least as I can recall. Worst case measure from hub to hub to check the wheelbase (115, 127, 133 I think).

Cam-Shaft · 12-15-2014, 03:36 PM

Good to know, so the frame is actually longer and not just the bed?

Keith Seymore · 12-15-2014, 07:30 PM

Quote:

Originally Posted by Cam-Shaft

Is determining the bed length as easy as measuring it? I know its a long bed, but how can I tell if its the ext. long bed or not? Can it be determined from the VIN number?

Yes - measure the length of the pickup box platform from the front end panel to the rear sill.

Tx Firefighter · 12-15-2014, 07:48 PM

Quote:

Originally Posted by Cam-Shaft

Good to know, so the frame is actually longer and not just the bed?

Yes, significantly longer (12 inches) between a normal longbed and a shortbed. Then the Longhorn got the extra six inches over that even.

dmack91 · 12-16-2014, 12:49 AM

Quote:

Originally Posted by Cam-Shaft

Good to know, so the frame is actually longer and not just the bed?

When we converted my son's LB to a SB, we had to cut 12" out ahead of the axle and 8" off the rear. 20" total difference.

12-15-2014, 02:13 PM	#1
Cam-Shaft Registered User Join Date: Nov 2014 Location: Vernon, CT Posts: 85	Bed length: is it as easy as measuring it? Is determining the bed length as easy as measuring it? I know its a long bed, but how can I tell if its the ext. long bed or not? Can it be determined from the VIN number?

12-15-2014, 02:50 PM	#2
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: Bed length: is it as easy as measuring it? Longhorns are fleet side and have seam about 6 inches from the front of the bed. 8feet 6inches. A 9foot step side just looks very long from cab to wheel well. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

12-15-2014, 03:35 PM	#3
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Bed length: is it as easy as measuring it? It's on the SPID. Not the VIN at least as I can recall. Worst case measure from hub to hub to check the wheelbase (115, 127, 133 I think). __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

12-15-2014, 03:36 PM	#4
Cam-Shaft Registered User Join Date: Nov 2014 Location: Vernon, CT Posts: 85	Re: Bed length: is it as easy as measuring it? Good to know, so the frame is actually longer and not just the bed?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.