Small Block shorty headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

loweredd · 08-19-2003, 07:57 PM

Who has a shorty on thier trucks? I know Edelbrock has em, and Hedman.....I can get those at work. What else is there?

gldevall · 08-19-2003, 09:06 PM

The headers for a chevelle will fit good. Ryan, low84, has them on his truck I believe as well as a few others.

phantom dually · 08-19-2003, 09:39 PM

Is there a long tube header that will not go below the frame rails?? Also equal length would be great.

cochino12 · 08-19-2003, 10:17 PM

I have a pair of sanderson shorty headers. There is a pic in the link in my sig if you want to see them

**N2TRUX** · 08-19-2003, 11:42 PM

I have a set from Street & Performance on my Blazer. Oh, wait that's on an LS1

Here's a set on my lawnmower. Does that count?

*1FaastC10* · 08-20-2003, 08:55 AM

Heddman Hussler headers for a 67-69 Camaro are a full length 1 3/4 primary header that will not go below the frame. they do however require special modifications to the crossmember. just so happens i saved a thread on these headers in my favorites... http://64.246.42.114/vboard/showthre...threadid=43427

LOHRTBT · 08-20-2003, 09:05 AM

I have JBA Shorties on mine.. Best set of headers I have ever owned.

loweredd · 08-20-2003, 07:59 PM

They would have counted.........if they were bolted up to the LS1!! That would give my L130 Deere a run for it's money!

I thought in Low84's posts, he has a big block?

Quote:

Originally posted by N2TRUX
I have a set from Street & Performance on my Blazer. Oh, wait that's on an LS1

Here's a set on my lawnmower. Does that count?

loweredd · 08-20-2003, 08:03 PM

I'm gonna swap the long ceramic coated headers that were on the truck to a guy at work for some stock manifolds for now......I gotta get the front on the truck down, and these crappy headers are keepin me up!

gldevall · 08-20-2003, 09:14 PM

Low 84 I believe it's a 350 punched out to get the 408. Not quite sure how it's done though. Anybody know?

loweredd · 08-21-2003, 12:09 AM

408, oh, I thought I saw something by his name about a 631.

*edit* I just looked him up under members, and I guess I was thinking of someone else.

For a 408, I think the stroke is 3.80 or 3.85 something like that. It's been awhile since I was doing the math for a 396 small block.

ocbaud · 08-21-2003, 12:56 AM

low84 currently has a 400sbc bored over to make it a 408

08-19-2003, 07:57 PM	#1
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	Small Block shorty headers Who has a shorty on thier trucks? I know Edelbrock has em, and Hedman.....I can get those at work. What else is there?

08-19-2003, 09:06 PM	#2
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	The headers for a chevelle will fit good. Ryan, low84, has them on his truck I believe as well as a few others. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

08-19-2003, 09:39 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Is there a long tube header that will not go below the frame rails?? Also equal length would be great. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-19-2003, 10:17 PM	#4
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	I have a pair of sanderson shorty headers. There is a pic in the link in my sig if you want to see them __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

08-19-2003, 11:42 PM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	I have a set from Street & Performance on my Blazer. Oh, wait that's on an LS1 Here's a set on my lawnmower. Does that count? Attached Images

08-20-2003, 08:55 AM	#6
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	Heddman Hussler headers for a 67-69 Camaro are a full length 1 3/4 primary header that will not go below the frame. they do however require special modifications to the crossmember. just so happens i saved a thread on these headers in my favorites... http://64.246.42.114/vboard/showthre...threadid=43427

08-20-2003, 09:05 AM	#7
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	I have JBA Shorties on mine.. Best set of headers I have ever owned. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

08-20-2003, 08:03 PM	#9
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	I'm gonna swap the long ceramic coated headers that were on the truck to a guy at work for some stock manifolds for now......I gotta get the front on the truck down, and these crappy headers are keepin me up!

08-20-2003, 09:14 PM	#10
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Low 84 I believe it's a 350 punched out to get the 408. Not quite sure how it's done though. Anybody know? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

08-21-2003, 12:09 AM	#11
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	408, oh, I thought I saw something by his name about a 631. edit I just looked him up under members, and I guess I was thinking of someone else. For a 408, I think the stroke is 3.80 or 3.85 something like that. It's been awhile since I was doing the math for a 396 small block. Last edited by loweredd; 08-21-2003 at 12:16 AM.

08-21-2003, 12:56 AM	#12
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	low84 currently has a 400sbc bored over to make it a 408



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.