KS WTB Stainless Windshield/Rear window Trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmking9 · 12-23-2014, 11:10 AM

Looking for a set of front and rear OEM stainless window trim that is straight. I am going to polish it up, so minor scratches or a few small dings aren't a deal breaker. But the straighter, the better. I would prefer the 67-70 version due to the deeper lip. But would consider 71/72 also. (If I have that switched, someone correct me) Thank you

Oldtruckfanatic · 12-23-2014, 12:06 PM

I have those pieces for the 71/72 trucks. Can post pics in a little while.

jmking9 · 12-23-2014, 06:44 PM

Quote:

Originally Posted by Oldtruckfanatic

I have those pieces for the 71/72 trucks. Can post pics in a little while.

That would be great. thanks

Oldtruckfanatic · 12-23-2014, 09:29 PM

Having a hard time getting good pics with my scratched up lenses but here are a couple just so you can see I have them I will try again in tbe daylight tomorrow.

Oldtruckfanatic · 12-23-2014, 09:34 PM

The rear window is in a 70 C20 the front trim came from a 72 C20 I have a couple more around here in my stuff but I would have to dig through a shed full of stuff to find them. These are both decent. Maybe 2 or 3 small dings on the windshield trim and maybe a couple more than that on the rear window trim but both are very usable.

jmking9 · 12-23-2014, 09:53 PM

I hadn't really thought about it, but is shipping these going to be a deal breaker? They look like they would be difficult to package and expensive to ship?? Have you shipped any of these before?

Oldtruckfanatic · 12-23-2014, 09:56 PM

They come apart to a point. They have to be shipped in a fairly large flat box. I have shipped them before and they dont weigh anything so its the package size that costs. It isnt super expensive though.

jmking9 · 12-24-2014, 12:15 AM

OK. Could you get some better pics of the worst dings?

Oldtruckfanatic · 12-24-2014, 12:45 AM

I will in the morning. They arent much.

Oldtruckfanatic · 12-24-2014, 04:23 PM

Here are the two worst dings one on each. The couple I could find otherwise are barely visible and dont show up on my phone camera

jmking9 · 12-24-2014, 10:44 PM

What would you have to have shipped to 66739?

Oldtruckfanatic · 12-24-2014, 11:01 PM

I dont know how does 80 shipped sound?

jmking9 · 12-25-2014, 12:57 PM

In the picture where you're holding it in your hand, is that piece bent up? Or is that the way it's supposed to look on the ends to fit into to connector piece? I've never actually seen this window trim uninstalled so I have no idea what it should look like.

Oldtruckfanatic · 12-27-2014, 10:17 PM

Thats juat the end of the trim where it slips into a joint. I just took that pic to show the depth of the lip that goes into the rubber gasket.

jmking9 · 12-28-2014, 12:04 AM

Ahh, that makes sense. Do you take Paypal?

Oldtruckfanatic · 12-28-2014, 12:24 AM

Yeah I will pm the addy to you. I removed the rear window trim yesterday so Its ready to wrap up and send out.

jmking9 · 12-28-2014, 01:10 AM

Paypal sent. Thank you

jmking9 · 01-14-2015, 08:13 PM

PM sent

jmking9 · 01-25-2015, 10:09 PM

Well, long story short

, I am still looking for this trim if anyone else has any they want to sell.

1968Mann · 01-25-2015, 10:23 PM

Quote:

Originally Posted by jmking9

Well, long story short

, I am still looking for this trim if anyone else has any they want to sell.

Could use a good polish and it will all look great. I am asking 95.00 shipped for this. Tricky stuff to ship! Window does not come with this. I just havent taken it out yet!

teeitup · 01-25-2015, 10:25 PM

I've got some up here now, but it would have to be picked up.

**1rippen6** · 01-25-2015, 11:15 PM

I may have a set for the windshield can check tomorrow.

**1rippen6** · 01-27-2015, 07:59 PM

Here is what I have windshield and back window it is the deep trim see picture I will have to dig out the clips but I do have them

**Cash3481** · 01-27-2015, 11:31 PM

I have a few sets here! Both early and late style!

Undone · 02-01-2015, 08:37 PM

Quote:

Originally Posted by Cash3481

I have a few sets here! Both early and late style!

How much for a set of early shipped?

12-23-2014, 11:10 AM	#1
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	WTB Stainless Windshield/Rear window Trim Looking for a set of front and rear OEM stainless window trim that is straight. I am going to polish it up, so minor scratches or a few small dings aren't a deal breaker. But the straighter, the better. I would prefer the 67-70 version due to the deeper lip. But would consider 71/72 also. (If I have that switched, someone correct me) Thank you __________________ 1970 SWB Build

12-23-2014, 12:06 PM	#2
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: WTB Stainless Windshield/Rear window Trim I have those pieces for the 71/72 trucks. Can post pics in a little while.

12-23-2014, 09:29 PM	#4
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: WTB Stainless Windshield/Rear window Trim Having a hard time getting good pics with my scratched up lenses but here are a couple just so you can see I have them I will try again in tbe daylight tomorrow. Attached Images

12-23-2014, 09:34 PM	#5
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: WTB Stainless Windshield/Rear window Trim The rear window is in a 70 C20 the front trim came from a 72 C20 I have a couple more around here in my stuff but I would have to dig through a shed full of stuff to find them. These are both decent. Maybe 2 or 3 small dings on the windshield trim and maybe a couple more than that on the rear window trim but both are very usable.

12-23-2014, 09:53 PM	#6
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: WTB Stainless Windshield/Rear window Trim I hadn't really thought about it, but is shipping these going to be a deal breaker? They look like they would be difficult to package and expensive to ship?? Have you shipped any of these before? __________________ 1970 SWB Build

12-23-2014, 09:56 PM	#7
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: WTB Stainless Windshield/Rear window Trim They come apart to a point. They have to be shipped in a fairly large flat box. I have shipped them before and they dont weigh anything so its the package size that costs. It isnt super expensive though.

12-24-2014, 12:15 AM	#8
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: WTB Stainless Windshield/Rear window Trim OK. Could you get some better pics of the worst dings? __________________ 1970 SWB Build

12-24-2014, 12:45 AM	#9
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: WTB Stainless Windshield/Rear window Trim I will in the morning. They arent much.

12-24-2014, 04:23 PM	#10
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: WTB Stainless Windshield/Rear window Trim Here are the two worst dings one on each. The couple I could find otherwise are barely visible and dont show up on my phone camera Attached Images

12-24-2014, 10:44 PM	#11
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: WTB Stainless Windshield/Rear window Trim What would you have to have shipped to 66739? __________________ 1970 SWB Build

12-24-2014, 11:01 PM	#12
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: WTB Stainless Windshield/Rear window Trim I dont know how does 80 shipped sound?

12-25-2014, 12:57 PM	#13
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: WTB Stainless Windshield/Rear window Trim In the picture where you're holding it in your hand, is that piece bent up? Or is that the way it's supposed to look on the ends to fit into to connector piece? I've never actually seen this window trim uninstalled so I have no idea what it should look like. __________________ 1970 SWB Build

12-27-2014, 10:17 PM	#14
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: WTB Stainless Windshield/Rear window Trim Thats juat the end of the trim where it slips into a joint. I just took that pic to show the depth of the lip that goes into the rubber gasket.

12-28-2014, 12:04 AM	#15
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: WTB Stainless Windshield/Rear window Trim Ahh, that makes sense. Do you take Paypal? __________________ 1970 SWB Build

12-28-2014, 12:24 AM	#16
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: WTB Stainless Windshield/Rear window Trim Yeah I will pm the addy to you. I removed the rear window trim yesterday so Its ready to wrap up and send out.



Register or Log In To remove these advertisements.

12-28-2014, 01:10 AM	#17
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: WTB Stainless Windshield/Rear window Trim Paypal sent. Thank you __________________ 1970 SWB Build

01-14-2015, 08:13 PM	#18
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: WTB Stainless Windshield/Rear window Trim PM sent __________________ 1970 SWB Build

01-25-2015, 10:09 PM	#19
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: WTB Stainless Windshield/Rear window Trim Well, long story short, I am still looking for this trim if anyone else has any they want to sell. __________________ 1970 SWB Build

01-25-2015, 10:25 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB Stainless Windshield/Rear window Trim I've got some up here now, but it would have to be picked up. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-25-2015, 11:15 PM	#22
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,767	Re: WTB Stainless Windshield/Rear window Trim I may have a set for the windshield can check tomorrow.

01-27-2015, 07:59 PM	#23
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,767	Re: WTB Stainless Windshield/Rear window Trim Here is what I have windshield and back window it is the deep trim see picture I will have to dig out the clips but I do have them Attached Images

01-27-2015, 11:31 PM	#24
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: WTB Stainless Windshield/Rear window Trim I have a few sets here! Both early and late style! Attached Images __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

Register or Log In To remove these advertisements.