KY WTB : Bucket Seat Hardware - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**hooverfish** · 12-26-2014, 04:41 PM

Need to buy some bucket seat hardware for drivers side Sport Bucket.

I think I need :
1. Adjuster handle return SPRING
2. Heavy seat return SPRING
3. ROD that connects 2 keys on each side of seat.

I am including a picture of the parts that I do already have .
I also already have good brackets.

Please let me know what you have for sale and what other parts I need. All help is appreciated. Thanks

**leddzepp** · 12-26-2014, 08:35 PM

I have all 3 parts you are needing, will try and get pics later tonight.

**hooverfish** · 12-26-2014, 08:48 PM

Quote:

Originally Posted by leddzepp

I have all 3 parts you are needing, will try and get pics later tonight.

Awesome, thanks.
I saw you post from about September on this same subject.
Does it look to you like the parts I have are correct/workable ?

**leddzepp** · 12-27-2014, 03:46 AM

Yes you have the correct parts. You only need two of the four springs you have pictured. Here is a connecting rod, heavy return spring, and lever return spring. $50 shipped/insured in a priority medium flat rate box (they don't fit in the small box).

**leddzepp** · 12-27-2014, 03:53 AM

Here is an underside pic of the driver side. You use the slider piece in your picture on the far right (piece with the open end or "notch", the adjuster handle pops in there). The connector rod attaches to the spring retainer at this end. You can also see the adjuster lever return spring.

**leddzepp** · 12-27-2014, 03:57 AM

Your piece with the "closed end" goes on the right side, and the connecting rod attaches to it, while the spring and retainer go on the outside of the slider.

**hooverfish** · 12-27-2014, 09:22 AM

Quote:

Originally Posted by leddzepp

I have all 3 parts you are needing, will try and get pics later tonight.

I will take them. Send me PM with payment info.
Paypal ? or let me know what you prefer.
Thank you for the extra pictures and advice. Very helpful.

**leddzepp** · 12-27-2014, 02:56 PM

Paypal is fine, no problem. Sending PM

12-26-2014, 04:41 PM	#1
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,124	WTB : Bucket Seat Hardware Need to buy some bucket seat hardware for drivers side Sport Bucket. I think I need : 1. Adjuster handle return SPRING 2. Heavy seat return SPRING 3. ROD that connects 2 keys on each side of seat. I am including a picture of the parts that I do already have . I also already have good brackets. Please let me know what you have for sale and what other parts I need. All help is appreciated. Thanks Attached Images __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job"

12-26-2014, 08:35 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: WTB : Bucket Seat Hardware I have all 3 parts you are needing, will try and get pics later tonight. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

12-27-2014, 03:46 AM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: WTB : Bucket Seat Hardware Yes you have the correct parts. You only need two of the four springs you have pictured. Here is a connecting rod, heavy return spring, and lever return spring. $50 shipped/insured in a priority medium flat rate box (they don't fit in the small box). Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

12-27-2014, 03:53 AM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: WTB : Bucket Seat Hardware Here is an underside pic of the driver side. You use the slider piece in your picture on the far right (piece with the open end or "notch", the adjuster handle pops in there). The connector rod attaches to the spring retainer at this end. You can also see the adjuster lever return spring. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

12-27-2014, 03:57 AM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: WTB : Bucket Seat Hardware Your piece with the "closed end" goes on the right side, and the connecting rod attaches to it, while the spring and retainer go on the outside of the slider. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

12-27-2014, 02:56 PM	#8
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: WTB : Bucket Seat Hardware Paypal is fine, no problem. Sending PM __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.