KS parting a 1972 gmc C20

[teeitup]

I will be parting this out some this weekend. Ask questions in thread.
dana 60 rearend $75 no shipping
front disc brake setup $75 no ship
sway bar setup $80 shipped
booster setup $75 shipped unknown condition
bare AC dash $175 shipped
see anything else you need ask
Thanks Randy

[teeitup]

mo

[teeitup]

mooo

[Hunter67stepside]

Can I get the emergency brake cable hooks (2) the door strikers (if white plastic, springs and pins are good). Price shipped to 37027 (Nashville)

[Hunter67stepside]

If the steering column pointer is in good shape I would be interested in that also

[danny69]

Randy
I need a good Engine wiring harness this one may not have one but thought you might have one. 69,307,350 trans. With gauges. Thanks. Danny

[DeadheadNM]

Price condition on the 3/4 t hub caps - thanks Randy

[danny69]

Forgot I also need the hold downs for 4 core radiator

[low&slow]

What are those two gauges on the bottom of the dash? Are they in good condition? Any pics of them?

[bronze 72 super]

How much for the tailgate band? Shipping to 97050. Thanks Mike.

[undertaker72]

gmc letters on hood, and gas cap , cond first , is the rear window factory if so possibly it and rubber , pending cond., also ill get in line on caps if pete passes on them

[Ozark Tim]

Hey randy
Are any of the factory frame brackets for the exhaust system on it?

[Justintime67]

The booster setup comes with MC, prop and brackets right?

[Cash3481]

I posted on Facebook but wanted to call for the ds fender on here too pending condition.

[bluek5]

I'll get in line for the rear slider if original and no extra holes.
Thanks, Paul

[Ugly 61]

Are the park light wiring looms ok?? If so price on them and I'll take the disc brake setup and sway bar. pm me with a ph# and address and I'll make a trip down to pick them up
Ugly 61

[teeitup]

Hunter, should have all that on it $34 shipped

Danny69, I'll look on harness, and I know I have upper 4 cores not sure about lowers till I get this one parted

Pete, I will get pics

low&slow, I'll get pics, unknown working condition

Mike, sorry selling tailgate band it with gate

Undertaker72, I have one guy looking for hood letters in front of you. I'll chekc out gas cap and slider and 2nd on caps

Tim, I will look on those

Justin, yes all complete

Mike, fender is yours

Paul, your 2nd on slider, I'll check it out

Ugly 61, I'll check wire looms. Sway bar and front end is yours, I'll just cut it behind shocks and you can have frame with disc brakes and sway bar, I'll have it all cut apart by mid next week hopefully

Thanks Randy

[leddzepp]

Randy- Do you happen to have a pair of sway bar frame brackets by themselves?

[Ridnhi]

How much for the tailgate shipped via greyhound? If you are willing. I have a station in my town.
I know it's rough but that's ok.

[davischevy]

Randy, I need a Sierra Grande glovebox door.

Thanks, Larry

[danny69]

Randy
What I need on the radiator is the rubber upper supports and the metal brackets that hold the rad. in place I've got the bottom part. Danny

[BigRed76]

What color are the defrost vents? And condition?

[Hunter67stepside]

Hey Randy. I asked about the e brake hooks and door strikers. I want the hooks. All I really need is the shims, plastic, pin and spring out of the door striker plates. In order to save on shipping the weight of the striker plate metal, would you mind popping them out? The two hooks and these few pieces should fit into a bubble mailer.

Assuming these are usable onmy 67 stepside, I'll take them Please confirm and let me know final price. Sorry to be a pain in the butt!

[BLT gmc]

All the Aux fuel tank, switch, valve stuff.
Thank you, Bruce

[PGSigns]

Price on the gauges under the dash and are they SW.
Thanks
Jimmy