TX mega c10 sale

[Zackarymc]

Parting out a very clean 1962 c10, 64 c10 left overs from build, and 84 c10 stuff< 62 stuff is all obo please text me for pictures 713-960-3541


the 1962 is already in pieces so dont ask me how much for the whole thing.... i have pictures of everything!

1962
Complete swb rolling chassis- sand blasted and paint started < def not the best job but looks clean $500
Cab 90% rust free- only part that has rust is the lower door weather strip area with title $750.00
standard heater with controller, harness and vents < make offer this is not a delux heater
gauge cluster and wire harness - spedo needle broken but harness is uncut < make offer
Front grill support -- 134
Left fender- 150 oe very solid ide say 99% rust free SOLD
Right fender- 100 has bubbles showing up on lower rear but zero holes SOLD
Cowl panels -- 50 each rust free blasted and primered, or I have 2 well used ones for 30
Left and right doors with glass and mechanisms- 250 each, these are rust free examples SOLD
Inner fenders- 100 bucks for the pair< have two sets and both in ok condition
Hood- it's a 8 out of 10- 300 bucks
Inner door panels -- one is flawless the other has a pouch tap screwed onto it - 150 pair
Grill- pretty thrashed but useable -- 50
Fleet side bed sides- long bed 200 for the pair the pass side has some damage but fixable 95% rust free
Front endbed panel -- 75 bucks- 100% rust free and un damaged
Rear cross still- 85 < this can only be used with 60-62
Wheel housings- 125 for the pair- perfect condition
Rear small window glass 15 bucks
Choke cable- 10
Spedo cable--5
Front glove box door- 15
Seat needs cover and a little foam work 125 SOLD
Door handles- 20 pair
Steel rear roll pan- 75 new in box
Lowered rear coils- 75 new <don't remember drop but they are short
Dual master cly- lmc part #34-4003- 5 bucks needs rebuild
Parking brake cable and handle long bed -20
Clutch and brake pedal assy- 15 bucks
1964 c10 new parts all unused
Disc swap with spindle drop- 499
Rebuilt a arms with moog product- 200
Front air ride cups/plate- 50 < used
Rear bag cups-50 < new
Front crosmember -- 50
1984 c10
Front spindle set up complete 100
Djm dropped lower control arms 125

[60-66]

interested in pictures of Wheel housings- 125 for the pair- perfect condition

[whateverpratt]

Interested in pictures of frame and cab.

[Zackarymc]

wheel housings

[60-66]

any dents or rust issues ?

[Zackarymc]

the cab.... i have many pictures of the cab- please text me its easier to send them

[Zackarymc]

couple of the areas where the bolts go have been tore off look at one of the pictures and you can see it. Ide say dent free. when i go back to the storage ill take a pic with the straight edge on them

[Zackarymc]

chassis

[AngryPirate]

I'll go next in line for the cab. I'm in Austin, so I can run down there and fetch it.

Thanks,
Scott

[AngryPirate]

Originally Posted by AngryPirate

I'll go next in line for the cab. I'm in Austin, so I can run down there and fetch it.

Thanks,
Scott

I guess I should add, if you have more pictures handy, PM me and I can shoot you my email or text (whichever is easier).

Thanks,
Scott

[Zackarymc]

sent pm

[Leeforbes]

Hello, I'm looking for a set of fender splash guards called "closing panels" in the assembly manual for my 1966 chevy C10 truck.They live in the front fenders and keep mud from the tires from flying...

[Zackarymc]

they are shot!

[jmader]

Can I get some pics of the bedsides?

[Zackarymc]

please text me 713-960-3541 its easier to send pics! how are you planning on shipping?

[rwade]

PM sent on doors.

Thanks, Wade

[64chevtruck]

Im interested in the DJM lower control arms, any idea on the drop they give? are they set up for bags or springs? what year truck are they for>?.

Thanks

[jmader]

Originally Posted by Zackarymc

please text me 713-960-3541 its easier to send pics! how are you planning on shipping?

I have a greyhound here I was hoping to go that route unless it's too ridiculous in price. I will text you later in the day for some pictures.

[Zackarymc]

djm 3" drop with factory coils. built for 73-87 c10's. they are 400 new from summit but they need ball joints. taKES 15 dollar factory ones.

[argonaut]

Does the 62 grill have the mount plates on the back and headlight buckets still intact?
How are much to ship to 90815?

[crhyno]

Is the 62 gauge cluster the deluxe or standard? Do you have a pic? Thanks

[Zackarymc]

grill is a 63-66 my bad! the dash only has fuel gauge and spedo rest are dummy lights. Dunno if thats delux or standard for 62.

[Zackarymc]

i do have two 62 head light surrounds... painted not chrome

[iceman777]

hi im looking for the washer nozzles and bottle and bracket if you have them please

[Zackarymc]

dont have them