CA 1969 3/4 ton axles, Dana and Eaton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**argonaut** · 01-26-2015, 12:16 PM

I pulling a set of 1969 3/4 ton front (dana 44) and rear (ho52) axles to swap in later model axles. Im hoping someone in cali will want one or both. They are in good condition, have 4.56 gears and drum brakes.

If you are interested let me know. I'll let them go cheap, $100 each OBO.

feller · 01-28-2015, 10:46 PM

Wish I was in Calli!!!! I've been wanting this set.

RedRoad · 01-31-2015, 01:40 AM

Interested and local, PM sent

70blackfish · 01-31-2015, 01:57 AM

May be interested in the rear only, is it a dana 60? picture?

**argonaut** · 02-02-2015, 04:37 AM

RedRoad, I pulled the axle yesterday, and just sent you a PM.

**argonaut** · 02-02-2015, 04:38 AM

Quote:

Originally Posted by 70blackfish

May be interested in the rear only, is it a dana 60? picture?

The rear is an Eaton HO52/72. I haven't pulled it out yet.

**argonaut** · 02-17-2015, 07:56 PM

These axles are still available. Let me know if interested. Thanks.

wario26 · 02-17-2015, 09:22 PM

Do you by any chance have pics, and are they 60's?

**argonaut** · 02-17-2015, 10:57 PM

I can take pics. The axles are from a 1969 3/4 ton pickup. Front is a dana 44 and rear is an eaton ho52. Both have drum brakes. Both have 4.56 gears. Both are in good shape with no major leaks.

**argonaut** · 02-20-2015, 04:33 PM

Also, I can possibly deliver in the LA/OC area.

**argonaut** · 02-26-2015, 04:27 AM

Any interest? Anyone?
If not these might be destined for the metal scrapper. I don't have room to store these for too long.

BIGBLOCKBOY1970 · 02-28-2015, 06:54 AM

i might be interested any pics?

**argonaut** · 03-02-2015, 12:16 AM

I have already pulled the front out. The rear is still under the suburban until I pull it or someone wants it. I can pull it in a couple hours.

**argonaut** · 03-06-2015, 12:26 PM

Anyone want these?

feller · 03-06-2015, 12:47 PM

Shipping to indianna would be out of the question, I'm just guessing

**argonaut** · 03-06-2015, 01:08 PM

I would do it but I think it would be pretty expensive. They'd have to be on a skid and go freight. Its probably 800lbs total for both. If you really want that I could make a couple calls. You probably also need a business address with a dock to receive it.

feller · 03-06-2015, 01:17 PM

Yeah too much of a pita, just hate to see good parts go to the junk, specially obsolete ones

**argonaut** · 03-06-2015, 01:18 PM

I would hang onto them but I have no place to store them.

evan396 · 03-06-2015, 01:32 PM

Pm sent

**argonaut** · 04-01-2015, 11:42 PM

I have pulled the HO52. So both axles are ready to go. If no one wants the whole axles then i'm happy to part out whats valuable.

i know evan396 is interested in the drums. I'll pull the cover next weekend and check for posi unit.

WhiteWhale · 04-02-2015, 01:05 AM

Im interested in the rear 3rd if it has a No Spin

**1968k20** · 04-02-2015, 12:30 PM

I am interested in the axles themselves and 3rd members if white whale doesn't want 3rd members. Price on just axle shafts plus shipping to 96020 please

hanly2 · 04-05-2015, 08:49 PM

I might be interested in the hubs if they will fit my truck. I need to pull my wheels and check it out. Its a 69 c30 1 ton with the ho52/72 dual wheels.

**argonaut** · 04-12-2015, 12:02 PM

Okay guys, sorry it has been taking so long. I finally disassembled the ho52 last night. Evrything looks rrally clean. So far I have:

Evan396 - Drums
1968k20 - Axle shafts, Open 3rd member with 4.56 gears

The drums are still attached to the hubs, unless I can find a way to press all the studs out.

Do any of you have a recommendation or preferred method of shipment? This stuff isn't light.

hanly2 · 04-12-2015, 06:21 PM

I don't think the drums are pressed onto the hubs dont they just bolt on?

01-26-2015, 12:16 PM	#1
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	1969 3/4 ton axles, Dana and Eaton I pulling a set of 1969 3/4 ton front (dana 44) and rear (ho52) axles to swap in later model axles. Im hoping someone in cali will want one or both. They are in good condition, have 4.56 gears and drum brakes. If you are interested let me know. I'll let them go cheap, $100 each OBO. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! Last edited by argonaut; 03-06-2015 at 12:28 PM.

01-28-2015, 10:46 PM	#2
feller Registered User Join Date: Feb 2011 Location: madison, IN. Posts: 484	Re: 1969 3/4 ton axles, Dana and Eaton Wish I was in Calli!!!! I've been wanting this set.

01-31-2015, 01:40 AM	#3
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 928	Re: 1969 3/4 ton axles, Dana and Eaton Interested and local, PM sent

01-31-2015, 01:57 AM	#4
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: 1969 3/4 ton axles, Dana and Eaton May be interested in the rear only, is it a dana 60? picture? __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

02-02-2015, 04:37 AM	#5
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1969 3/4 ton axles, Dana and Eaton RedRoad, I pulled the axle yesterday, and just sent you a PM. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

02-17-2015, 07:56 PM	#7
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1969 3/4 ton axles, Dana and Eaton These axles are still available. Let me know if interested. Thanks. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

02-17-2015, 09:22 PM	#8
wario26 Registered User Join Date: Jan 2015 Location: El Paso, Texas Posts: 47	Re: 1969 3/4 ton axles, Dana and Eaton Do you by any chance have pics, and are they 60's?

02-17-2015, 10:57 PM	#9
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1969 3/4 ton axles, Dana and Eaton I can take pics. The axles are from a 1969 3/4 ton pickup. Front is a dana 44 and rear is an eaton ho52. Both have drum brakes. Both have 4.56 gears. Both are in good shape with no major leaks. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

02-20-2015, 04:33 PM	#10
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1969 3/4 ton axles, Dana and Eaton Also, I can possibly deliver in the LA/OC area. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

02-26-2015, 04:27 AM	#11
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1969 3/4 ton axles, Dana and Eaton Any interest? Anyone? If not these might be destined for the metal scrapper. I don't have room to store these for too long. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! Last edited by argonaut; 03-02-2015 at 01:24 AM.

02-28-2015, 06:54 AM	#12
BIGBLOCKBOY1970 Registered User Join Date: Sep 2010 Location: TORRANCE,CA Posts: 2	Re: 1969 3/4 ton axles, Dana and Eaton i might be interested any pics?

03-02-2015, 12:16 AM	#13
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1969 3/4 ton axles, Dana and Eaton I have already pulled the front out. The rear is still under the suburban until I pull it or someone wants it. I can pull it in a couple hours. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

03-06-2015, 12:26 PM	#14
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1969 3/4 ton axles, Dana and Eaton Anyone want these? __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

03-06-2015, 12:47 PM	#15
feller Registered User Join Date: Feb 2011 Location: madison, IN. Posts: 484	Re: 1969 3/4 ton axles, Dana and Eaton Shipping to indianna would be out of the question, I'm just guessing

03-06-2015, 01:08 PM	#16
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1969 3/4 ton axles, Dana and Eaton I would do it but I think it would be pretty expensive. They'd have to be on a skid and go freight. Its probably 800lbs total for both. If you really want that I could make a couple calls. You probably also need a business address with a dock to receive it. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! Last edited by argonaut; 03-06-2015 at 01:17 PM.



Register or Log In To remove these advertisements.

03-06-2015, 01:17 PM	#17
feller Registered User Join Date: Feb 2011 Location: madison, IN. Posts: 484	Re: 1969 3/4 ton axles, Dana and Eaton Yeah too much of a pita, just hate to see good parts go to the junk, specially obsolete ones

03-06-2015, 01:18 PM	#18
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1969 3/4 ton axles, Dana and Eaton I would hang onto them but I have no place to store them. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

03-06-2015, 01:32 PM	#19
evan396 Registered User Join Date: Dec 2013 Location: clinton ct Posts: 212	Re: 1969 3/4 ton axles, Dana and Eaton Pm sent

04-01-2015, 11:42 PM	#20
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1969 3/4 ton axles, Dana and Eaton I have pulled the HO52. So both axles are ready to go. If no one wants the whole axles then i'm happy to part out whats valuable. i know evan396 is interested in the drums. I'll pull the cover next weekend and check for posi unit. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

04-02-2015, 01:05 AM	#21
WhiteWhale Registered User Join Date: Apr 2014 Location: Southern California Posts: 200	Re: 1969 3/4 ton axles, Dana and Eaton Im interested in the rear 3rd if it has a No Spin

04-02-2015, 12:30 PM	#22
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: 1969 3/4 ton axles, Dana and Eaton I am interested in the axles themselves and 3rd members if white whale doesn't want 3rd members. Price on just axle shafts plus shipping to 96020 please

04-05-2015, 08:49 PM	#23
hanly2 Registered User Join Date: Mar 2014 Location: Gibbstown, NJ Posts: 176	Re: 1969 3/4 ton axles, Dana and Eaton I might be interested in the hubs if they will fit my truck. I need to pull my wheels and check it out. Its a 69 c30 1 ton with the ho52/72 dual wheels.

04-12-2015, 12:02 PM	#24
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1969 3/4 ton axles, Dana and Eaton Okay guys, sorry it has been taking so long. I finally disassembled the ho52 last night. Evrything looks rrally clean. So far I have: Evan396 - Drums 1968k20 - Axle shafts, Open 3rd member with 4.56 gears The drums are still attached to the hubs, unless I can find a way to press all the studs out. Do any of you have a recommendation or preferred method of shipment? This stuff isn't light. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

04-12-2015, 06:21 PM	#25
hanly2 Registered User Join Date: Mar 2014 Location: Gibbstown, NJ Posts: 176	Re: 1969 3/4 ton axles, Dana and Eaton I don't think the drums are pressed onto the hubs dont they just bolt on?

Register or Log In To remove these advertisements.