SD 1967 4x4 frame, Axles, T-Case, MT & Shafts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67 cst swb** · 01-30-2015, 11:35 AM

I have a 1967 4x4 truck.
cab is completely wasted, beat up and rusty. I can't even get the drivers door open.
front fenders and hood are not worth anything.
What is there:
Frame - longbox, box sides are gone, was a wood floor only a few crossmembers left
Transfer Case - including floor shifter
SMxxx manual transmission - whatever a 67 had
Rear Axle - leaf spring, I can check code if needed.
Front Axle - this is the type with lock in/lock out selector
Drive Shafts - both F & R
Leaf Springs - F & R

Make offer and come get it.

jmader · 01-30-2015, 12:32 PM

Title?

**67 cst swb** · 01-30-2015, 12:56 PM

Quote:

Originally Posted by jmader

Title?

Sorry, no.

cypressbog · 01-30-2015, 03:00 PM

If this truck had factory power assist steering I know a member looking for the set-up.

**67 cst swb** · 01-30-2015, 03:12 PM

Quote:

Originally Posted by cypressbog

If this truck had factory power assist steering I know a member looking for the set-up.

I don't think it does, but I will go look today.

57taskforce · 01-30-2015, 07:21 PM

Where is it located at?

**67 cst swb** · 01-31-2015, 10:16 AM

Rapid City, South Dakota

**67 cst swb** · 02-01-2015, 01:53 AM

Quote:

Originally Posted by cypressbog

If this truck had factory power assist steering I know a member looking for the set-up.

Well, I think it had it at one time, but steering box and everything is gone. Only things left are the drag link that goes all the way from left to right.

**67 cst swb** · 02-01-2015, 01:55 AM

It does have
HQ 12 10 W
code axle, so I think that would be a 3.73 and front axle I assume matches ratio-wise.

I did get a few pics if anyone wants me to text them.

Krex · 02-02-2015, 01:12 AM

Can you pm me some photos of frame

Duluth67 · 02-02-2015, 10:13 AM

I am interested in the Trans/t-case. Have you split the two? I need to replace my current SM420/Rockwell T221 as the trans output shaft and t-case input collar are severely worn. Thanks

**67 cst swb** · 02-02-2015, 11:03 AM

Quote:

Originally Posted by Krex

Can you pm me some photos of frame

I can text message you a few photos that I have. I am no longer near it to get specific pictures.
If you would like to PM me your cell number, I can text what I have.

**67 cst swb** · 02-02-2015, 11:07 AM

Quote:

Originally Posted by Duluth67

I am interested in the Trans/t-case. Have you split the two? I need to replace my current SM420/Rockwell T221 as the trans output shaft and t-case input collar are severely worn. Thanks

I have no idea on the condition of what I have. The MT and T-case are still together in the vehicle.

I have no problem selling the MT and T-case to you. But you will have to take everything. I will not separate.

Duluth67 · 02-02-2015, 06:06 PM

Could you clarify "will not separate"? I am interested in both, just want to know the condition of said shafts. Do you want to separate the running gear from the frame, and sell the trans/tcase combo sight-unseen?

**67 cst swb** · 02-02-2015, 06:45 PM

Quote:

Originally Posted by Duluth67

Could you clarify "will not separate"? I am interested in both, just want to know the condition of said shafts. Do you want to separate the running gear from the frame, and sell the trans/tcase combo sight-unseen?

I would prefer to sell the whole truck as is.
I would be happy to text message you pictures of what is there.
I have absolutely no luck getting images uploaded in here.

Duluth67 · 02-03-2015, 06:12 PM

I guess I live a little far to drive to SD. Thanks for the offer.

**67 cst swb** · 02-03-2015, 06:20 PM

Quote:

Originally Posted by Duluth67

I guess I live a little far to drive to SD. Thanks for the offer.

No problem and
Welcome to the board

Oh If I still have this come June and we go to Back to the 50's again.
Maybe I could deliver it that far for free delivery.

Duluth67 · 02-04-2015, 08:17 AM

Thanks 67

pimpston65 · 03-19-2015, 06:20 AM

Quote:

Originally Posted by 67 cst swb

No problem and
Welcome to the board

Oh If I still have this come June and we go to Back to the 50's again.
Maybe I could deliver it that far for free delivery.

will you sale just the locking hubs? pics also pleas!!!

**67 cst swb** · 03-19-2015, 01:00 PM

My intention is to get the whole thing gone.
But, I guess I might consider it. I do have a pic I can text to you. PM me your cell number.

pimpston65 · 03-19-2015, 01:31 PM

Quote:

Originally Posted by 67 cst swb

My intention is to get the whole thing gone.
But, I guess I might consider it. I do have a pic I can text to you. PM me your cell number.

PM sent

**67 cst swb** · 03-19-2015, 02:50 PM

pics sent in text msg

01-30-2015, 11:35 AM	#1
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	1967 4x4 frame, Axles, T-Case, MT & Shafts I have a 1967 4x4 truck. cab is completely wasted, beat up and rusty. I can't even get the drivers door open. front fenders and hood are not worth anything. What is there: Frame - longbox, box sides are gone, was a wood floor only a few crossmembers left Transfer Case - including floor shifter SMxxx manual transmission - whatever a 67 had Rear Axle - leaf spring, I can check code if needed. Front Axle - this is the type with lock in/lock out selector Drive Shafts - both F & R Leaf Springs - F & R Make offer and come get it. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White Last edited by 67 cst swb; 02-02-2015 at 11:14 AM.

01-30-2015, 12:32 PM	#2
jmader Registered User Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Title? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

01-30-2015, 03:00 PM	#4
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts If this truck had factory power assist steering I know a member looking for the set-up.

01-30-2015, 07:21 PM	#6
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,505	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Where is it located at? __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

01-31-2015, 10:16 AM	#7
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Rapid City, South Dakota __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

02-01-2015, 01:55 AM	#9
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts It does have HQ 12 10 W code axle, so I think that would be a 3.73 and front axle I assume matches ratio-wise. I did get a few pics if anyone wants me to text them. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

02-02-2015, 01:12 AM	#10
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Can you pm me some photos of frame

02-02-2015, 10:13 AM	#11
Duluth67 Registered User Join Date: Jan 2015 Location: Duluth Posts: 42	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts I am interested in the Trans/t-case. Have you split the two? I need to replace my current SM420/Rockwell T221 as the trans output shaft and t-case input collar are severely worn. Thanks

02-02-2015, 06:06 PM	#14
Duluth67 Registered User Join Date: Jan 2015 Location: Duluth Posts: 42	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Could you clarify "will not separate"? I am interested in both, just want to know the condition of said shafts. Do you want to separate the running gear from the frame, and sell the trans/tcase combo sight-unseen?

02-03-2015, 06:12 PM	#16
Duluth67 Registered User Join Date: Jan 2015 Location: Duluth Posts: 42	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts I guess I live a little far to drive to SD. Thanks for the offer.

02-04-2015, 08:17 AM	#18
Duluth67 Registered User Join Date: Jan 2015 Location: Duluth Posts: 42	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Thanks 67

03-19-2015, 01:00 PM	#20
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts My intention is to get the whole thing gone. But, I guess I might consider it. I do have a pic I can text to you. PM me your cell number. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White Last edited by 67 cst swb; 03-19-2015 at 01:10 PM.

03-19-2015, 02:50 PM	#22
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts pics sent in text msg __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.