SD WTB... WY, UT, NV... I-80 or I-15 area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67 cst swb** · 01-30-2015, 01:16 PM

How about that for a title?

I am hoping to find a low hump repair panel out of a low hump cab.
I have a cab I am repairing and the previous owner cut the floor out to crudely bolt a high hump floor in. I am wanting to return to the correct low hump floor.

Now to explain the title.
I frequently drive from Rapid City, SD to Las Vegas, NV.
I travel through Casper, Rawlins, Rock Springs, Evanston in Wyoming.
Park City, Heber City, Provo, Nephi, St. George in Utah.
Mesquite, Las Vegas and Henderson, Pahrump area in Nevada.
Plus... Las Vegas to Barstow to Bakersfield along Hwy 58 in California.

So, If anyone along that route has this patch panel I need. I could pick it up along the way or look at a possibility and pay you first and pick up on the return route. Just wanted to throw the option out there.

I am just the type that would rather drive alittle out of my way to pick something up, then to spend $25.00 shipping something. Plus, you never know, I might just buy something else from you also.

muckmuck · 01-30-2015, 01:24 PM

I will keep an eye out here and let you know if I find something!

**67 cst swb** · 01-30-2015, 01:33 PM

Quote:

Originally Posted by muckmuck

I will keep an eye out here and let you know if I find something!

Thanks.
I will be in LV from Feb 1 - Late April.

bluek5 · 01-30-2015, 01:58 PM

I have truck that I am going to part out with one. I am in Lehi about five miles off of I-15.
Paul

**67 cst swb** · 01-30-2015, 02:10 PM

Quote:

Originally Posted by bluek5

I have truck that I am going to part out with one. I am in Lehi about five miles off of I-15.
Paul

Any thoughts on a price?

bluek5 · 01-30-2015, 06:18 PM

How about $40.0? I didn't pay a whole lot of attention to your route. I would be a little out of your way.

**67 cst swb** · 01-31-2015, 10:18 AM

I will take it.
Have you cut it out yet?

PM sent

**67 cst swb** · 02-01-2015, 02:10 AM

We are setting up for a visit tomorrow.

**67 cst swb** · 02-02-2015, 11:12 AM

Thanks bluek5.
It was good meeting you.

01-30-2015, 01:16 PM	#1
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	WTB... WY, UT, NV... I-80 or I-15 area How about that for a title? I am hoping to find a low hump repair panel out of a low hump cab. I have a cab I am repairing and the previous owner cut the floor out to crudely bolt a high hump floor in. I am wanting to return to the correct low hump floor. Now to explain the title. I frequently drive from Rapid City, SD to Las Vegas, NV. I travel through Casper, Rawlins, Rock Springs, Evanston in Wyoming. Park City, Heber City, Provo, Nephi, St. George in Utah. Mesquite, Las Vegas and Henderson, Pahrump area in Nevada. Plus... Las Vegas to Barstow to Bakersfield along Hwy 58 in California. So, If anyone along that route has this patch panel I need. I could pick it up along the way or look at a possibility and pay you first and pick up on the return route. Just wanted to throw the option out there. I am just the type that would rather drive alittle out of my way to pick something up, then to spend $25.00 shipping something. Plus, you never know, I might just buy something else from you also. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

01-30-2015, 01:24 PM	#2
muckmuck Junior Member Join Date: Apr 2005 Location: Henderson, NV Posts: 329	Re: WTB... WY, UT, NV... I-80 or I-15 area I will keep an eye out here and let you know if I find something!

01-30-2015, 01:58 PM	#4
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: WTB... WY, UT, NV... I-80 or I-15 area I have truck that I am going to part out with one. I am in Lehi about five miles off of I-15. Paul

01-30-2015, 06:18 PM	#6
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: WTB... WY, UT, NV... I-80 or I-15 area How about $40.0? I didn't pay a whole lot of attention to your route. I would be a little out of your way.

01-31-2015, 10:18 AM	#7
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: WTB... WY, UT, NV... I-80 or I-15 area I will take it. Have you cut it out yet? PM sent __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

02-01-2015, 02:10 AM	#8
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: WTB... WY, UT, NV... I-80 or I-15 area We are setting up for a visit tomorrow. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

02-02-2015, 11:12 AM	#9
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: WTB... WY, UT, NV... I-80 or I-15 area Thanks bluek5. It was good meeting you. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.